// SPDX-License-Identifier: BSD-3-Clause
/*
 * Copyright (c) 2025, Gabriel Gonzales <semfault@disroot.org>
 */

/dts-v1/;

#include <dt-bindings/arm/qcom,ids.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/input/gpio-keys.h>
#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
#include "sm6125.dtsi"
#include "pm6125.dtsi"

/delete-node/ &adsp_pil_mem;
/delete-node/ &cont_splash_mem;
/delete-node/ &gpu_mem;
/delete-node/ &ipa_fw_mem;
/delete-node/ &ipa_gsi_mem;

/ {
	model = "Xiaomi Redmi Note 8";
	compatible = "xiaomi,ginkgo", "qcom,sm6125";
	chassis-type = "handset";

	qcom,msm-id = <QCOM_ID_SM6125 0x10000>;

	aliases {
		serial0 = &uart4;
	};

	chosen {
		#address-cells = <2>;
		#size-cells = <2>;
		ranges;

		framebuffer {
			compatible = "simple-framebuffer";
			memory-region = <&framebuffer_mem>;
			width = <1080>;
			height = <2340>;
			stride = <(1080 * 4)>;
			format = "a8r8g8b8";
		};
	};

	reserved-memory {
		adsp_pil_mem: adsp_pil_mem@55300000 {
			reg = <0x0 0x55300000 0x0 0x2200000>;
			no-map;
		};

		ipa_fw_mem: ipa_fw_mem@57500000 {
			reg = <0x0 0x57500000 0x0 0x10000>;
			no-map;
		};

		ipa_gsi_mem: ipa_gsi_mem@57510000 {
			reg = <0x0 0x57510000 0x0 0x5000>;
			no-map;
		};

		gpu_mem: gpu_mem@57515000 {
			reg = <0x0 0x57515000 0x0 0x2000>;
			no-map;
		};

		framebuffer_mem: framebuffer@5c000000 {
			reg = <0x0 0x5c000000 0x0 (2340 * 1080 * 4)>;
			no-map;
		};

		/* Matching with recovery values to be able to get the results. */
		ramoops@61600000 {
			compatible = "ramoops";
			reg = <0x0 0x61600000 0x0 0x400000>;
			record-size = <0x80000>;
			pmsg-size = <0x200000>;
			console-size = <0x100000>;
		};
	};

	gpio-keys {
		compatible = "gpio-keys";

		pinctrl-0 = <&vol_up_n>;
		pinctrl-names = "default";

		key-volume-up {
			label = "Volume Up";
			gpios = <&pm6125_gpios 5 GPIO_ACTIVE_LOW>;
			linux,code = <KEY_VOLUMEUP>;
			debounce-interval = <15>;
			linux,can-disable;
			wakeup-source;
		};
	};
};

&pm6125_gpios {
	vol_up_n: vol-up-n-state {
		pins = "gpio5";
		function = "normal";
		power-source = <0>;
		bias-pull-up;
		input-enable;
	};
};

&hsusb_phy1 {
	vdd-supply = <&vreg_l7a>;
	vdda-pll-supply = <&vreg_l10a>;
	vdda-phy-dpdm-supply = <&vreg_l15a>;
	status = "okay";
};

&pon_pwrkey {
	status = "okay";
};

&pon_resin {
	linux,code = <KEY_VOLUMEDOWN>;
	status = "okay";
};

&qupv3_id_0 {
	status = "okay";
};

&rpm_requests {
	regulators-0 {
		compatible = "qcom,rpm-pm6125-regulators";

		vreg_s6a: s6 {
			regulator-min-microvolt = <936000>;
			regulator-max-microvolt = <1422000>;
		};

		vreg_l1a: l1 {
			regulator-min-microvolt = <1200000>;
			regulator-max-microvolt = <1256000>;
		};

		vreg_l2a: l2 {
			regulator-min-microvolt = <1000000>;
			regulator-max-microvolt = <1056000>;
		};

		vreg_l3a: l3 {
			regulator-min-microvolt = <1000000>;
			regulator-max-microvolt = <1064000>;
		};

		vreg_l4a: l4 {
			regulator-min-microvolt = <872000>;
			regulator-max-microvolt = <976000>;
			regulator-allow-set-load;
		};

		vreg_l5a: l5 {
			regulator-min-microvolt = <1648000>;
			regulator-max-microvolt = <2950000>;
			regulator-allow-set-load;
		};

		vreg_l6a: l6 {
			regulator-min-microvolt = <576000>;
			regulator-max-microvolt = <656000>;
		};

		vreg_l7a: l7 {
			regulator-min-microvolt = <872000>;
			regulator-max-microvolt = <976000>;
		};

		vreg_l8a: l8 {
			regulator-min-microvolt = <400000>;
			regulator-max-microvolt = <728000>;
		};

		vreg_l9a: l9 {
			regulator-min-microvolt = <1800000>;
			regulator-max-microvolt = <1896000>;
		};

		vreg_l10a: l10 {
			regulator-min-microvolt = <1800000>;
			regulator-max-microvolt = <1896000>;
			regulator-allow-set-load;
		};

		vreg_l11a: l11 {
			regulator-min-microvolt = <1800000>;
			regulator-max-microvolt = <1952000>;
			regulator-allow-set-load;
		};

		vreg_l12a: l12 {
			regulator-min-microvolt = <1800000>;
			regulator-max-microvolt = <1996000>;
		};

		vreg_l13a: l13 {
			regulator-min-microvolt = <1800000>;
			regulator-max-microvolt = <1832000>;
		};

		vreg_l14a: l14 {
			regulator-min-microvolt = <1800000>;
			regulator-max-microvolt = <1904000>;
		};

		vreg_l15a: l15 {
			regulator-min-microvolt = <3104000>;
			regulator-max-microvolt = <3232000>;
		};

		vreg_l16a: l16 {
			regulator-min-microvolt = <1800000>;
			regulator-max-microvolt = <1904000>;
		};

		vreg_l17a: l17 {
			regulator-min-microvolt = <1248000>;
			regulator-max-microvolt = <1304000>;
		};

		vreg_l18a: l18 {
			regulator-min-microvolt = <1200000>;
			regulator-max-microvolt = <1264000>;
			regulator-allow-set-load;
		};

		vreg_l19a: l19 {
			regulator-min-microvolt = <1648000>;
			regulator-max-microvolt = <2952000>;
		};

		vreg_l20a: l20 {
			regulator-min-microvolt = <1648000>;
			regulator-max-microvolt = <2952000>;
		};

		vreg_l21a: l21 {
			regulator-min-microvolt = <2600000>;
			regulator-max-microvolt = <2856000>;
		};

		vreg_l22a: l22 {
			regulator-min-microvolt = <2944000>;
			regulator-max-microvolt = <2950000>;
			regulator-allow-set-load;
		};

		vreg_l23a: l23 {
			regulator-min-microvolt = <3000000>;
			regulator-max-microvolt = <3400000>;
		};

		vreg_l24a: l24 {
			regulator-min-microvolt = <2944000>;
			regulator-max-microvolt = <2950000>;
			regulator-allow-set-load;
		};

	};
};

&sdc2_off_state {
	sd-cd-pins {
		pins = "gpio98";
		function = "gpio";
		drive-strength = <2>;
		bias-disable;
	};
};

&sdc2_on_state {
	sd-cd-pins {
		pins = "gpio98";
		function = "gpio";
		drive-strength = <2>;
		bias-pull-up;
	};
};

&sdhc_1 {
	vmmc-supply = <&vreg_l24a>;
	vqmmc-supply = <&vreg_l11a>;
	status = "okay";
};

&sdhc_2 {
	cd-gpios = <&tlmm 98 GPIO_ACTIVE_HIGH>;
	vmmc-supply = <&vreg_l22a>;
	vqmmc-supply = <&vreg_l5a>;
	no-sdio;
	no-mmc;
	status = "okay";
};

&tlmm {
	gpio-reserved-ranges = <0 4>, <30 4>;
};

&uart4 {
	status = "okay";
};

&usb3 {
	status = "okay";
};