// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
/*
 * Copyright (c) 2026, Val Packett <val@packett.cool>
 */

/dts-v1/;

/* PM7250B is configured to use SID8/9 */
#define PM7250B_SID 8
#define PM7250B_SID1 9

#include <dt-bindings/arm/qcom,ids.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/iio/qcom,spmi-adc7-pm7325.h>
#include <dt-bindings/iio/qcom,spmi-adc7-pmk8350.h>
#include <dt-bindings/leds/common.h>
#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
#include <dt-bindings/regulator/qcom,rpmh-regulator.h>

#include "sm7325.dtsi"
#include "pm7325.dtsi"
#include "pm7250b.dtsi"
#include "pm8350c.dtsi" /* PM7350C */
#include "pmk8350.dtsi" /* PMK7325 */

/ {
	model = "Motorola Edge 30";
	compatible = "motorola,dubai", "qcom,sm7325";
	chassis-type = "handset";

	aliases {
		bluetooth0 = &bluetooth;
		serial0 = &uart5;
		serial1 = &uart7;
		wifi0 = &wifi;
	};

	chosen {
		#address-cells = <2>;
		#size-cells = <2>;
		ranges;

		stdout-path = "serial0:115200n8";

		framebuffer {
			compatible = "simple-framebuffer";
			memory-region = <&framebuffer_mem>;
			width = <1080>;
			height = <2400>;
			stride = <(1080 * 4)>;
			format = "a8r8g8b8";

			clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
				 <&dispcc DISP_CC_MDSS_MDP_CLK>,
				 <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
				 <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
				 <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
				 <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
			power-domains = <&dispcc DISP_CC_MDSS_CORE_GDSC>;
		};
	};

	gpio-keys {
		compatible = "gpio-keys";

		pinctrl-0 = <&kypd_vol_up_n>;
		pinctrl-names = "default";

		key-volume-up {
			label = "Volume Up";
			gpios = <&pm7325_gpios 6 GPIO_ACTIVE_LOW>;
			linux,code = <KEY_VOLUMEUP>;
		};
	};

	pmic-glink {
		compatible = "qcom,sm7325-pmic-glink",
			     "qcom,qcm6490-pmic-glink",
			     "qcom,pmic-glink";

		#address-cells = <1>;
		#size-cells = <0>;

		orientation-gpios = <&tlmm 140 GPIO_ACTIVE_HIGH>;

		connector@0 {
			compatible = "usb-c-connector";
			reg = <0>;

			power-role = "dual";
			data-role = "dual";

			ports {
				#address-cells = <1>;
				#size-cells = <0>;

				port@0 {
					reg = <0>;

					pmic_glink_hs_in: endpoint {
						remote-endpoint = <&usb_1_dwc3_hs>;
					};
				};

				port@2 {
					reg = <2>;

					pmic_glink_sbu: endpoint {
						remote-endpoint = <&fsa4480_sbu_mux>;
					};
				};
			};
		};
	};

	reserved-memory {
		#address-cells = <2>;
		#size-cells = <2>;
		ranges;

		ramoops@ae000000 {
			compatible = "ramoops";
			reg = <0x0 0xae000000 0x0 0xc0000>;
			console-size = <0x40000>;
			mem-type = <2>;
			pmsg-size = <0x40000>;
			record-size = <0x3f800>;
		};

		removed@c0000000 {
			reg = <0x0 0xc0000000 0x0 0x5100000>;
			no-map;
		};

		framebuffer_mem: framebuffer@e1000000 {
			reg = <0x0 0xe1000000 0x0 (1080 * 2400 * 4)>;
			no-map;
		};

		linux,cma {
			compatible = "shared-dma-pool";
			size = <0x0 0x8000000>;
			reusable;
			linux,cma-default;
		};
	};

	thermal-zones {
		cam-flash-thermal {
			thermal-sensors = <&pmk8350_adc_tm 2>;

			trips {
				active-config0 {
					temperature = <125000>;
					hysteresis = <1000>;
					type = "passive";
				};
			};
		};

		chg-skin-thermal {
			thermal-sensors = <&pm7250b_adc_tm 0>;

			trips {
				active-config0 {
					temperature = <125000>;
					hysteresis = <1000>;
					type = "passive";
				};
			};
		};

		chg-thermal {
			thermal-sensors = <&pmk8350_adc_tm 4>;

			trips {
				active-config0 {
					temperature = <125000>;
					hysteresis = <1000>;
					type = "passive";
				};
			};
		};

		conn-thermal {
			thermal-sensors = <&pm7250b_adc_tm 1>;

			trips {
				active-config0 {
					temperature = <125000>;
					hysteresis = <1000>;
					type = "passive";
				};
			};
		};

		pa-1-thermal {
			thermal-sensors = <&pmk8350_adc_tm 5>;

			trips {
				active-config0 {
					temperature = <125000>;
					hysteresis = <1000>;
					type = "passive";
				};
			};
		};

		pa-2-thermal {
			thermal-sensors = <&pmk8350_adc_tm 6>;

			/* Reports negative temperature. */
			status = "disabled";

			trips {
				active-config0 {
					temperature = <125000>;
					hysteresis = <1000>;
					type = "passive";
				};
			};
		};

		quiet-thermal {
			thermal-sensors = <&pmk8350_adc_tm 1>;

			trips {
				active-config0 {
					temperature = <125000>;
					hysteresis = <1000>;
					type = "passive";
				};
			};
		};

		sdm-skin-thermal {
			thermal-sensors = <&pmk8350_adc_tm 3>;

			trips {
				active-config0 {
					temperature = <125000>;
					hysteresis = <1000>;
					type = "passive";
				};
			};
		};

		xo-thermal {
			thermal-sensors = <&pmk8350_adc_tm 0>;

			trips {
				active-config0 {
					temperature = <125000>;
					hysteresis = <1000>;
					type = "passive";
				};
			};
		};
	};

	// S2B is really ebi.lvl but it's there for supply map completeness sake.
	vreg_s2b_0p7: smpb2-regulator {
		compatible = "regulator-fixed";
		regulator-name = "vreg_s2b_0p7";

		regulator-min-microvolt = <65535>;
		regulator-max-microvolt = <65535>;
		regulator-always-on;
		vin-supply = <&vph_pwr>;
	};

	vph_pwr: vph-pwr-regulator {
		compatible = "regulator-fixed";
		regulator-name = "vph_pwr";
		regulator-min-microvolt = <3700000>;
		regulator-max-microvolt = <3700000>;
	};

	wcn6750-pmu {
		compatible = "qcom,wcn6750-pmu";
		pinctrl-0 = <&bt_en>;
		pinctrl-names = "default";
		vddaon-supply = <&mos_0p95_aon_s10c>;
		vddasd-supply = <&vreg_l11c_2p8>;
		vddpmu-supply = <&mos_0p95_dig_s10c>;
		vddio-supply = <&vdd18_io>;
		vddrfa0p8-supply = <&vdd09_pmu_rfa_i>;
		vddrfa1p2-supply = <&vdd13_pmu_rfa_i>;
		vddrfa1p7-supply = <&vdd19_pmu_rfa_i>;
		vddrfa2p2-supply = <&vdd22_wlpa_s1c>;

		bt-enable-gpios = <&tlmm 85 GPIO_ACTIVE_HIGH>;

		regulators {
			vreg_pmu_rfa_cmn: ldo0 {
				regulator-name = "vreg_pmu_rfa_cmn";
			};

			vreg_pmu_aon_0p59: ldo1 {
				regulator-name = "vreg_pmu_aon_0p59";
			};

			vreg_pmu_wlcx_0p8: ldo2 {
				regulator-name = "vreg_pmu_wlcx_0p8";
			};

			vreg_pmu_wlmx_0p85: ldo3 {
				regulator-name = "vreg_pmu_wlmx_0p85";
			};

			vreg_pmu_btcmx_0p85: ldo4 {
				regulator-name = "vreg_pmu_btcmx_0p85";
			};

			vreg_pmu_rfa_0p8: ldo5 {
				regulator-name = "vreg_pmu_rfa_0p8";
			};

			vreg_pmu_rfa_1p2: ldo6 {
				regulator-name = "vreg_pmu_rfa_1p2";
			};

			vreg_pmu_rfa_1p7: ldo7 {
				regulator-name = "vreg_pmu_rfa_1p7";
			};

			vreg_pmu_pcie_0p9: ldo8 {
				regulator-name = "vreg_pmu_pcie_0p9";
			};

			vreg_pmu_pcie_1p8: ldo9 {
				regulator-name = "vreg_pmu_pcie_1p8";
			};
		};
	};
};

&apps_rsc {
	regulators-0 {
		compatible = "qcom,pm7325-rpmh-regulators";
		qcom,pmic-id = "b";

		vdd-s1-supply = <&vph_pwr>;
		vdd-s2-supply = <&vph_pwr>;
		vdd-s7-supply = <&vph_pwr>;
		vdd-s8-supply = <&vph_pwr>;

		vdd-l1-l4-l12-l15-supply = <&vreg_s7b_0p952>;
		vdd-l2-l7-supply = <&vreg_bob>;
		vdd-l3-supply = <&vreg_s2b_0p7>;
		vdd-l5-supply = <&vreg_s2b_0p7>;
		vdd-l6-l9-l10-supply = <&vreg_s8b_1p256>;
		vdd-l8-supply = <&vreg_s7b_0p952>;
		vdd-l11-l17-l18-l19-supply = <&vreg_s1b_1p856>;
		vdd-l13-supply = <&vreg_s7b_0p952>;
		vdd-l14-l16-supply = <&vreg_s8b_1p256>;

		/*
		 * S2, L4-L5 are ARCs:
		 * S2 - ebi.lvl,
		 * L4 - lmx.lvl,
		 * l5 - lcx.lvl.
		 *
		 * L10 are unused.
		 */

		vdd19_pmu_rfa_i:
		vreg_s1b_1p856: smps1 {
			regulator-name = "vreg_s1b_1p856";
			regulator-min-microvolt = <1840000>;
			regulator-max-microvolt = <2040000>;
		};

		mos_0p95_aon_s10c:
		mos_0p95_dig_s10c:
		vdd09_pmu_rfa_i:
		vreg_s7b_0p952: smps7 {
			regulator-name = "vreg_s7b_0p952";
			regulator-min-microvolt = <535000>;
			regulator-max-microvolt = <1120000>;
		};

		vdd13_pmu_rfa_i:
		vreg_s8b_1p256: smps8 {
			regulator-name = "vreg_s8b_1p256";
			regulator-min-microvolt = <1200000>;
			regulator-max-microvolt = <1500000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_RET>;
		};

		vreg_l1b_0p912: ldo1 {
			regulator-name = "vreg_l1b_0p912";
			regulator-min-microvolt = <825000>;
			regulator-max-microvolt = <925000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vdd_a_usbhs_3p1:
		vreg_l2b_3p072: ldo2 {
			regulator-name = "vreg_l2b_3p072";
			regulator-min-microvolt = <2700000>;
			regulator-max-microvolt = <3544000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l3b_0p6: ldo3 {
			regulator-name = "vreg_l3b_0p6";
			regulator-min-microvolt = <312000>;
			regulator-max-microvolt = <910000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vdd_a_dsi_0_1p2:
		vdd_a_ufs_0_1p2:
		vreg_l6b_1p2: ldo6 {
			regulator-name = "vreg_l6b_1p2";
			regulator-min-microvolt = <1140000>;
			regulator-max-microvolt = <1260000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
			regulator-allow-set-load;
			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
						   RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l7b_2p96: ldo7 {
			regulator-name = "vreg_l7b_2p96";
			regulator-min-microvolt = <2400000>;
			regulator-max-microvolt = <3544000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
			regulator-allow-set-load;
			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
						   RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l8b_0p904: ldo8 {
			regulator-name = "vreg_l8b_0p904";
			regulator-min-microvolt = <870000>;
			regulator-max-microvolt = <970000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l9b_1p2: ldo9 {
			regulator-name = "vreg_l9b_1p2";
			regulator-min-microvolt = <1200000>;
			regulator-max-microvolt = <1304000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
			regulator-allow-set-load;
			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
						   RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l11b_1p776: ldo11 {
			regulator-name = "vreg_l11b_1p776";
			regulator-min-microvolt = <1504000>;
			regulator-max-microvolt = <2000000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l12b_0p8: ldo12 {
			regulator-name = "vreg_l12b_0p8";
			regulator-min-microvolt = <751000>;
			regulator-max-microvolt = <824000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l13b_0p8: ldo13 {
			regulator-name = "vreg_l13b_0p8";
			regulator-min-microvolt = <530000>;
			regulator-max-microvolt = <824000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l14b_1p2: ldo14 {
			regulator-name = "vreg_l14b_1p2";
			regulator-min-microvolt = <1080000>;
			regulator-max-microvolt = <1304000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l15b_0p88: ldo15 {
			regulator-name = "vreg_l15b_0p88";
			regulator-min-microvolt = <765000>;
			regulator-max-microvolt = <1020000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l16b_1p2: ldo16 {
			regulator-name = "vreg_l16b_1p2";
			regulator-min-microvolt = <1100000>;
			regulator-max-microvolt = <1300000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l17b_1p8: ldo17 {
			regulator-name = "vreg_l17b_1p8";
			regulator-min-microvolt = <1700000>;
			regulator-max-microvolt = <1900000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l18b_1p8: ldo18 {
			regulator-name = "vreg_l18b_1p8";
			regulator-min-microvolt = <1800000>;
			regulator-max-microvolt = <2000000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
			regulator-always-on;
			regulator-boot-on;
		};

		vdd18_io:
		vreg_l19b_1p8: ldo19 {
			regulator-name = "vreg_l19b_1p8";
			regulator-min-microvolt = <1800000>;
			regulator-max-microvolt = <2000000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};
	};

	regulators-1 {
		compatible = "qcom,pm8350c-rpmh-regulators";
		qcom,pmic-id = "c";

		vdd-s1-supply = <&vph_pwr>;
		vdd-s2-supply = <&vph_pwr>;
		vdd-s5-supply = <&vph_pwr>;
		vdd-s7-supply = <&vph_pwr>;
		vdd-s9-supply = <&vph_pwr>;
		vdd-s10-supply = <&vph_pwr>;

		vdd-l1-l12-supply = <&vreg_s1b_1p856>;
		vdd-l2-l8-supply = <&vreg_s1b_1p856>;
		vdd-l3-l4-l5-l7-l13-supply = <&vreg_bob>;
		vdd-l6-l9-l11-supply = <&vreg_bob>;
		vdd-l10-supply = <&vreg_s7b_0p952>;

		vdd-bob-supply = <&vph_pwr>;

		/*
		 * S2, S5, S7, S10 are ARCs:
		 * S2 - cx.lvl,
		 * S5 - mss.lvl,
		 * S7 - gfx.lvl,
		 * S10 - mx.lvl.
		 */

		vdd22_wlpa_s1c:
		vreg_s1c_2p2: smps1 {
			regulator-name = "vreg_s1c_2p2";
			regulator-min-microvolt = <2190000>;
			regulator-max-microvolt = <2210000>;
		};

		vreg_s9c_0p676: smps9 {
			regulator-name = "vreg_s9c_0p676";
			regulator-min-microvolt = <1010000>;
			regulator-max-microvolt = <1170000>;
		};

		vdd_a_usbhs_1p8:
		vdd_qfprom:
		vreg_l1c_1p8: ldo1 {
			regulator-name = "vreg_l1c_1p8";
			regulator-min-microvolt = <1800000>;
			regulator-max-microvolt = <1980000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		iovdd_ts:
		vreg_l2c_1p8: ldo2 {
			regulator-name = "vreg_l2c_1p8";
			regulator-min-microvolt = <1800000>;
			regulator-max-microvolt = <1800000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vdd_ts:
		vreg_l3c_3p0: ldo3 {
			regulator-name = "vreg_l3c_3p0";
			regulator-min-microvolt = <3000000>;
			regulator-max-microvolt = <3304000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l4c_1p8_3p0: ldo4 {
			regulator-name = "vreg_l4c_1p8_3p0";
			regulator-min-microvolt = <1620000>;
			regulator-max-microvolt = <3300000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l5c_1p8_3p0: ldo5 {
			regulator-name = "vreg_l5c_1p8_3p0";
			regulator-min-microvolt = <1620000>;
			regulator-max-microvolt = <3300000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l6c_2p96: ldo6 {
			regulator-name = "vreg_l6c_2p96";
			regulator-min-microvolt = <1650000>;
			regulator-max-microvolt = <3544000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l7c_3p0: ldo7 {
			regulator-name = "vreg_l7c_3p0";
			regulator-min-microvolt = <3000000>;
			regulator-max-microvolt = <3544000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l8c_1p8: ldo8 {
			regulator-name = "vreg_l8c_1p8";
			regulator-min-microvolt = <1620000>;
			regulator-max-microvolt = <2000000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l9c_3p3: ldo9 {
			regulator-name = "vreg_l9c_2p96";
			regulator-min-microvolt = <3008000>;
			regulator-max-microvolt = <3300000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vdd_a_dsi_0_0p9:
		vdd_a_ufs_0_core:
		vdd_a_usbhs_core:
		vreg_l10c_0p88: ldo10 {
			regulator-name = "vreg_l10c_0p88";
			regulator-min-microvolt = <720000>;
			regulator-max-microvolt = <1050000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
			regulator-allow-set-load;
			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
						   RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l11c_2p8: ldo11 {
			regulator-name = "vreg_l11c_2p8";
			regulator-min-microvolt = <2800000>;
			regulator-max-microvolt = <3544000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		disp_iovcc_1p8:
		vreg_l12c_1p8: ldo12 {
			regulator-name = "vreg_l12c_1p8";
			regulator-min-microvolt = <1800000>;
			regulator-max-microvolt = <1800000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		disp_vci_3p0:
		vreg_l13c_3p0: ldo13 {
			regulator-name = "vreg_l13c_3p0";
			regulator-min-microvolt = <3000000>;
			regulator-max-microvolt = <3000000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		audio_sw_vcc:
		vreg_bob: bob {
			regulator-name = "vreg_bob";
			regulator-min-microvolt = <3008000>;
			regulator-max-microvolt = <3960000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
		};
	};
};

&gcc {
	protected-clocks = <GCC_CFG_NOC_LPASS_CLK>,
			   <GCC_MSS_CFG_AHB_CLK>,
			   <GCC_MSS_OFFLINE_AXI_CLK>,
			   <GCC_MSS_Q6SS_BOOT_CLK_SRC>,
			   <GCC_MSS_Q6_MEMNOC_AXI_CLK>,
			   <GCC_MSS_SNOC_AXI_CLK>,
			   <GCC_QSPI_CNOC_PERIPH_AHB_CLK>,
			   <GCC_QSPI_CORE_CLK>,
			   <GCC_QSPI_CORE_CLK_SRC>,
			   <GCC_SEC_CTRL_CLK_SRC>,
			   <GCC_WPSS_AHB_BDG_MST_CLK>,
			   <GCC_WPSS_AHB_CLK>,
			   <GCC_WPSS_RSCP_CLK>;
};

&gpi_dma0 {
	status = "okay";
};

&gpi_dma1 {
	status = "okay";
};

&gpu {
	status = "okay";
};

&gpu_zap_shader {
	firmware-name = "qcom/sm7325/motorola/dubai/a660_zap.mbn";
};

&i2c4 {
	clock-frequency = <100000>;

	status = "okay";

	typec-mux@42 {
		compatible = "fcs,fsa4480";
		reg = <0x42>;

		interrupts-extended = <&tlmm 6 IRQ_TYPE_LEVEL_LOW>;

		vcc-supply = <&audio_sw_vcc>;

		mode-switch;
		orientation-switch;

		port {
			fsa4480_sbu_mux: endpoint {
				remote-endpoint = <&pmic_glink_sbu>;
			};
		};
	};
};

&ipa {
	firmware-name = "qcom/sm7325/motorola/dubai/yupik_ipa_fws.mbn";
	memory-region = <&ipa_fw_mem>;

	qcom,gsi-loader = "self";

	status = "okay";
};

&pm7250b_adc {
	channel@4e {
		reg = <ADC5_AMUX_THM2_100K_PU>;
		qcom,ratiometric;
		qcom,hw-settle-time = <200>;
		qcom,pre-scaling = <1 1>;
		label = "chg_skin_therm";
	};

	channel@4f {
		reg = <ADC5_AMUX_THM3_100K_PU>;
		qcom,ratiometric;
		qcom,hw-settle-time = <200>;
		qcom,pre-scaling = <1 1>;
		label = "conn_therm";
	};
};

&pm7250b_adc_tm {
	status = "okay";

	chg-skin-therm@0 {
		reg = <0>;
		io-channels = <&pm7250b_adc ADC5_AMUX_THM2_100K_PU>;
		qcom,ratiometric;
		qcom,hw-settle-time-us = <200>;
	};

	conn-therm@1 {
		reg = <1>;
		io-channels = <&pm7250b_adc ADC5_AMUX_THM3_100K_PU>;
		qcom,ratiometric;
		qcom,hw-settle-time-us = <200>;
	};
};

&pm7250b_gpios {
	gpio-line-names = "FG_ALERT_N", /* GPIO_1 */
			  "SLAVECP_INT",
			  "NC",
			  "NC",
			  "NC",
			  "DOUBLER_STAT",
			  "NC",
			  "NC",
			  "NC",
			  "NC", /* GPIO_10 */
			  "NC",
			  "NC";
};

&pm7325_gpios {
	gpio-line-names = "PA_THERM1", /* GPIO_1 */
			  "NC",
			  "NC",
			  "PA_THERM2",
			  "CBL_PWR_N",
			  "KYPD_VOL_UP_N",
			  "NC",
			  "NC",
			  "NC",
			  "NC"; /* GPIO_10 */

	kypd_vol_up_n: kypd-volp-n-state {
		pins = "gpio6";
		function = PMIC_GPIO_FUNC_NORMAL;
		bias-pull-up;
		input-enable;
		power-source = <1>;
	};
};

&pm8350c_gpios {
	gpio-line-names = "NC", /* GPIO_1 */
			  "NC",
			  "NC",
			  "NC",
			  "NC",
			  "NC",
			  "NC",
			  "NC",
			  "NC"; /* GPIO_9 */
};

&pm8350c_flash {
	status = "okay";

	led-0 {
		function = LED_FUNCTION_FLASH;
		color = <LED_COLOR_ID_WHITE>;
		led-sources = <1>, <4>;
		led-max-microamp = <500000>;
		flash-max-microamp = <1500000>;
		flash-max-timeout-us = <400000>;
	};

	led-1 {
		function = LED_FUNCTION_FLASH;
		color = <LED_COLOR_ID_WHITE>;
		led-sources = <2>, <3>;
		led-max-microamp = <500000>;
		flash-max-microamp = <1500000>;
		flash-max-timeout-us = <400000>;
	};
};

&pmk8350_adc_tm {
	status = "okay";

	xo-therm@0 {
		reg = <0>;
		io-channels = <&pmk8350_vadc PMK8350_ADC7_AMUX_THM1_100K_PU>;
		qcom,ratiometric;
		qcom,hw-settle-time-us = <200>;
	};

	quiet-therm@1 {
		reg = <1>;
		io-channels = <&pmk8350_vadc PM7325_ADC7_AMUX_THM1_100K_PU>;
		qcom,ratiometric;
		qcom,hw-settle-time-us = <200>;
	};

	cam-flash-therm@2 {
		reg = <2>;
		io-channels = <&pmk8350_vadc PM7325_ADC7_AMUX_THM2_100K_PU>;
		qcom,ratiometric;
		qcom,hw-settle-time-us = <200>;
	};

	sdm-skin-therm@3 {
		reg = <3>;
		io-channels = <&pmk8350_vadc PM7325_ADC7_AMUX_THM3_100K_PU>;
		qcom,ratiometric;
		qcom,hw-settle-time-us = <200>;
	};

	chg-therm@4 {
		reg = <4>;
		io-channels = <&pmk8350_vadc PM7325_ADC7_AMUX_THM4_100K_PU>;
		qcom,ratiometric;
		qcom,hw-settle-time-us = <200>;
	};

	pa-therm-1@5 {
		reg = <5>;
		io-channels = <&pmk8350_vadc PM7325_ADC7_GPIO1_100K_PU>;
		qcom,ratiometric;
		qcom,hw-settle-time-us = <200>;
	};

	pa-therm-2@6 {
		reg = <6>;
		io-channels = <&pmk8350_vadc PM7325_ADC7_GPIO4_100K_PU>;
		qcom,ratiometric;
		qcom,hw-settle-time-us = <200>;
	};
};

&pmk8350_gpios {
	gpio-line-names = "NC", /* GPIO_0 */
			  "NC",
			  "TP_PMK_GPIO_3",
			  "PMK_OPTION"; /* GPIO_4 */
};

&pmk8350_rtc {
	status = "okay";
};

&pmk8350_vadc {
	status = "okay";

	channel@44 {
		reg = <PMK8350_ADC7_AMUX_THM1_100K_PU>;
		qcom,ratiometric;
		qcom,hw-settle-time = <200>;
		qcom,pre-scaling = <1 1>;
		label = "pmk8350_xo_therm";
	};

	channel@144 {
		reg = <PM7325_ADC7_AMUX_THM1_100K_PU>;
		qcom,ratiometric;
		qcom,hw-settle-time = <200>;
		qcom,pre-scaling = <1 1>;
		label = "pm7325_quiet_therm";
	};

	channel@145 {
		reg = <PM7325_ADC7_AMUX_THM2_100K_PU>;
		qcom,ratiometric;
		qcom,hw-settle-time = <200>;
		qcom,pre-scaling = <1 1>;
		label = "pm7325_cam_flash_therm";
	};

	channel@146 {
		reg = <PM7325_ADC7_AMUX_THM3_100K_PU>;
		qcom,ratiometric;
		qcom,hw-settle-time = <200>;
		qcom,pre-scaling = <1 1>;
		label = "pm7325_sdm_skin_therm";
	};

	channel@147 {
		reg = <PM7325_ADC7_AMUX_THM4_100K_PU>;
		qcom,ratiometric;
		qcom,hw-settle-time = <200>;
		qcom,pre-scaling = <1 1>;
		label = "pm7325_chg_therm";
	};

	channel@14a {
		reg = <PM7325_ADC7_GPIO1_100K_PU>;
		qcom,ratiometric;
		qcom,hw-settle-time = <200>;
		qcom,pre-scaling = <1 1>;
		label = "pm7325_pa_therm1";
	};

	channel@14d {
		reg = <PM7325_ADC7_GPIO4_100K_PU>;
		qcom,ratiometric;
		qcom,hw-settle-time = <200>;
		qcom,pre-scaling = <1 1>;
		label = "pm7325_pa_therm2";
	};
};

&pon_pwrkey {
	status = "okay";
};

&pon_resin {
	linux,code = <KEY_VOLUMEDOWN>;

	status = "okay";
};

&qfprom {
	vcc-supply = <&vdd_qfprom>;
};

&qup_spi13_cs {
	drive-strength = <6>;
	bias-pull-down;
};

&qup_spi13_data_clk {
	drive-strength = <6>;
	bias-pull-down;
};

&qup_uart5_rx {
	drive-strength = <2>;
	bias-disable;
};

&qup_uart5_tx {
	drive-strength = <2>;
	bias-disable;
};

&qup_uart7_cts {
	/*
	 * Configure a bias-bus-hold on CTS to lower power
	 * usage when Bluetooth is turned off. Bus hold will
	 * maintain a low power state regardless of whether
	 * the Bluetooth module drives the pin in either
	 * direction or leaves the pin fully unpowered.
	 */
	bias-bus-hold;
};

&qup_uart7_rts {
	/* We'll drive RTS, so no pull */
	drive-strength = <2>;
	bias-disable;
};

&qup_uart7_rx {
	/*
	 * Configure a pull-up on RX. This is needed to avoid
	 * garbage data when the TX pin of the Bluetooth module is
	 * in tri-state (module powered off or not driving the
	 * signal yet).
	 */
	bias-pull-up;
};

&qup_uart7_tx {
	/* We'll drive TX, so no pull */
	drive-strength = <2>;
	bias-disable;
};

&qupv3_id_0 {
	status = "okay";
};

&qupv3_id_1 {
	status = "okay";
};

&remoteproc_adsp {
	firmware-name = "qcom/sm7325/motorola/dubai/adsp.mbn";

	status = "okay";
};

&remoteproc_cdsp {
	firmware-name = "qcom/sm7325/motorola/dubai/cdsp.mbn";

	status = "okay";
};

&remoteproc_mpss {
	firmware-name = "qcom/sm7325/motorola/dubai/modem.mbn";

	status = "okay";
};

&remoteproc_wpss {
	firmware-name = "qcom/sm7325/motorola/dubai/wpss.mbn";

	status = "okay";
};

&rmtfs_mem {
	qcom,vmid = <QCOM_SCM_VMID_MSS_MSA>,
		    <QCOM_SCM_VMID_NAV>;
};

&spi13 {
	status = "okay";

	touchscreen@0 {
		compatible = "goodix,gt9916";
		reg = <0>;

		interrupts-extended = <&tlmm 81 IRQ_TYPE_LEVEL_LOW>;

		reset-gpios = <&tlmm 105 GPIO_ACTIVE_LOW>;

		avdd-supply = <&vdd_ts>;
		vddio-supply = <&iovdd_ts>;

		spi-max-frequency = <1000000>;

		touchscreen-size-x = <1080>;
		touchscreen-size-y = <2400>;

		pinctrl-0 = <&ts_int_n>, <&ts_reset_n>;
		pinctrl-names = "default";
	};
};

&tlmm {
	gpio-line-names = "NC", /* GPIO_0 */
			  "NC",
			  "NC",
			  "NC",
			  "SMARTPA_I2C_SDA",
			  "SMARTPA_I2C_SCK",
			  "AUD_4480_DET",
			  "AUD_4480_INT",
			  "FASTCHARGE_I2C_SDA",
			  "FASTCHARGE_I2C_SCL",
			  "SM_GPSLNA_EN_GPIO10", /* GPIO_10 */
			  "NC",
			  "PERI_I2C_SDA",
			  "PERI_I2C_SCL",
			  "NC",
			  "NC",
			  "APPS_I2C_SDA",
			  "APPS_I2C_SCL",
			  "NC",
			  "DISP_LDO_EN",
			  "CAM_FW_RST_N", /* GPIO_20 */
			  "CAM_RM_RST_N",
			  "DBG_UART_TXD",
			  "DBG_UART_RXD",
			  "TOPSB_INT_N",
			  "MCAM_LDO_EN",
			  "HOST2WLAN_SOL",
			  "WLAN2HOST_SOL",
			  "UART_BT_RTS_AP_CTS",
			  "UART_BT_CTS_AP_RTS",
			  "UART_BT_RX_AP_TX", /* GPIO_30 */
			  "UART_BT_TX_AP_RX",
			  "FRONT_60M_INT",
			  "FRONT_60M_RST",
			  "FP_INT",
			  "FP_RST",
			  "NFC_I2C_SDA",
			  "NFC_I2C_SCL",
			  "NFC_EN",
			  "NFC_CLK_REQ",
			  "NFC_SE_SPI_NREST", /* GPIO_40 */
			  "NFC_IRQ",
			  "RF_LDO_GPIO42_EN",
			  "GOOGLE_KEY_INT", /* no such key exists */
			  "DISP_RST_N",
			  "SB_INT_N",
			  "HAP_RST_N",
			  "HAP_INT",
			  "ESE_SPI_MISO",
			  "ESE_SPI_MOSI",
			  "ESE_SPI_CLK", /* GPIO_50 */
			  "ESE_SPI_CS",
			  "TP_SPI_MISO",
			  "TP_SPI_MOSI",
			  "TP_SPI_CLK",
			  "TP_SPI_CS_N",
			  "FP_SPI_MISO",
			  "FP_SPI_MOSI",
			  "FP_SPI_CLK",
			  "FP_SPI_CS_N",
			  "HW_ID_1", /* GPIO_60 */
			  "HW_ID_2",
			  "CAM_PMU_EN",
			  "WIDE_DVDD_LDO_EN",
			  "CAM_MCLK0",
			  "CAM_MCLK1",
			  "CAM_MCLK2",
			  "CAM_MCLK3",
			  "NC",
			  "CCI_I2C_SDA0",
			  "CCI_I2C_SCL0", /* GPIO_70 */
			  "CCI_I2C_SDA1",
			  "CCI_I2C_SCL1",
			  "CCI_I2C_SDA2",
			  "CCI_I2C_SCL2",
			  "CCI_I2C_SDA3",
			  "CCI_I2C_SCL3",
			  "CAM_RT_RST_N",
			  "CAM_RU_RST_N",
			  "FCAM_LDO_EN",
			  "DISP_TE", /* GPIO_80 */
			  "TP_INT_N",
			  "FORCED_USB_BOOT",
			  "SM_CDC_RST_N",
			  "WLAN_EN",
			  "BT_EN",
			  "WCN_SW_CTRL",
			  "PCIE0_RESET_N",
			  "PCIE0_CLK_REQ_N",
			  "PCIE0_WAKE_N",
			  "MOS_AS_EN", /* GPIO_90 */
			  "NC",
			  "",
			  "NC",
			  "BT_FM_SLIMBUS_CLK",
			  "BT_FM_SLIMBUS_DATA",
			  "NC",
			  "RFCONN_DET_1",
			  "RF_CON_DET_2",
			  "RF_CON_DET_3",
			  "NC", /* GPIO_100 */
			  "NC",
			  "NC",
			  "ACCEL_INT",
			  "NC",
			  "TP_RST_N",
			  "NC",
			  "NC",
			  "NC",
			  "UIM2_DATA",
			  "UIM2_CLK", /* GPIO_110 */
			  "UIM2_RESET",
			  "UIM2_PRESENT",
			  "UIM1_DATA",
			  "UIM1_CLK",
			  "UIM1_RESET",
			  "UIM1_PRESENT",
			  "SM_RFFE0_CLK",
			  "SM_RFFE0_DATA",
			  "SM_RFFE1_CLK",
			  "SM_RFFE1_DATA", /* GPIO_120 */
			  "PA_MUTING",
			  "SM_GRFC5",
			  "LAA_RX",
			  "SM_GRFC7",
			  "SM_RFFE4_CLK",
			  "SM_RFFE4_DATA",
			  "WLAN_COEX_UART_RX",
			  "WLAN_COEX_UART_TX",
			  "NC",
			  "NC", /* GPIO_130 */
			  "SM_GRFC12",
			  "NC",
			  "QLINK0_REQUEST",
			  "QLINK0_ENABLE",
			  "QLINK0_WMSS_RESET_N",
			  "NC",
			  "NC",
			  "NC",
			  "NC",
			  "USB_CC_DIR", /* GPIO_140 */
			  "SAR_INT_N",
			  "PROX_INT_N",
			  "",
			  "SM_SWR_TX_CLK",
			  "SM_SWR_TX_DATA0",
			  "SM_SWR_TX_DATA1",
			  "SM_SWR_RX_CLK",
			  "SM_SWR_RX_DATA0",
			  "SM_SWR_RX_DATA1",
			  "NC", /* GPIO_150 */
			  "NC",
			  "NC",
			  "NC",
			  "SB_MI2S_SCK",
			  "SB_MI2S_WS",
			  "SB_MI2S_RXDAT_AP_TX",
			  "SB_MI2S_TXDAT_AP_RX",
			  "NC",
			  "SNS_I3C0_SDA",
			  "SNS_I3C0_SCL", /* GPIO_160 */
			  "SSC_I2C4_SDA",
			  "SSC_I2C4_SCL",
			  "MAG_I2C_SDA",
			  "MAG_I2C_SCL",
			  "NC",
			  "NC",
			  "",
			  "",
			  "",
			  "", /* GPIO_170 */
			  "SSC_BT_UART4_TX",
			  "SSC_BT_UART4_RX",
			  "NC",
			  "NC";
	gpio-reserved-ranges = <48 4>, /* SPI (eSE - embedded Secure Element) */
			       <56 4>; /* SPI (fingerprint reader) */

	qup_uart7_sleep_cts: qup-uart7-sleep-cts-state {
		pins = "gpio28";
		function = "gpio";
		/*
		 * Configure a bias-bus-hold on CTS to lower power
		 * usage when Bluetooth is turned off. Bus hold will
		 * maintain a low power state regardless of whether
		 * the Bluetooth module drives the pin in either
		 * direction or leaves the pin fully unpowered.
		 */
		bias-bus-hold;
	};

	qup_uart7_sleep_rts: qup-uart7-sleep-rts-state {
		pins = "gpio29";
		function = "gpio";
		/*
		 * Configure pull-down on RTS. As RTS is active low
		 * signal, pull it low to indicate the BT SoC that it
		 * can wakeup the system anytime from suspend state by
		 * pulling RX low (by sending wakeup bytes).
		 */
		bias-pull-down;
	};

	qup_uart7_sleep_tx: qup-uart7-sleep-tx-state {
		pins = "gpio30";
		function = "gpio";
		/*
		 * Configure pull-up on TX when it isn't actively driven
		 * to prevent BT SoC from receiving garbage during sleep.
		 */
		bias-pull-up;
	};

	qup_uart7_sleep_rx: qup-uart7-sleep-rx-state {
		pins = "gpio31";
		function = "gpio";
		/*
		 * Configure a pull-up on RX. This is needed to avoid
		 * garbage data when the TX pin of the Bluetooth module
		 * is floating which may cause spurious wakeups.
		 */
		bias-pull-up;
	};

	oled_reset_n: oled-reset-n-state {
		pins = "gpio44";
		function = "gpio";
		drive-strength = <8>;
		bias-disable;
	};

	aw86224_reset_default: aw86224-reset-default-state {
		pins = "gpio46";
		function = "gpio";
		drive-strength = <2>;
		bias-pull-down;
	};

	aw86224_int_default: aw86224-int-default-state {
		pins = "gpio47";
		function = "gpio";
		drive-strength = <2>;
		bias-pull-up;
	};

	mdp_vsync_p: mdp-vsync-p-state {
		pins = "gpio80";
		function = "mdp_vsync";
		drive-strength = <2>;
		bias-pull-down;
	};

	ts_int_n: ts-int-n-state {
		pins = "gpio81";
		function = "gpio";
		drive-strength = <8>;
		bias-pull-up;
	};

	bt_en: bt-en-state {
		pins = "gpio85";
		function = "gpio";
		output-low;
		bias-disable;
	};

	ts_reset_n: ts-int-n-state {
		pins = "gpio105";
		function = "gpio";
		drive-strength = <8>;
		bias-pull-up;
	};
};

&uart5 {
	status = "okay";
};

&uart7 {
	/delete-property/ interrupts;
	interrupts-extended = <&intc GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>,
			      <&tlmm 31 IRQ_TYPE_EDGE_FALLING>;
	pinctrl-1 = <&qup_uart7_sleep_cts>,
		    <&qup_uart7_sleep_rts>,
		    <&qup_uart7_sleep_tx>,
		    <&qup_uart7_sleep_rx>;
	pinctrl-names = "default",
			"sleep";

	status = "okay";

	bluetooth: bluetooth {
		compatible = "qcom,wcn6750-bt";

		vddrfacmn-supply = <&vreg_pmu_rfa_cmn>;
		vddaon-supply = <&vreg_pmu_aon_0p59>;
		vddbtcmx-supply = <&vreg_pmu_btcmx_0p85>;
		vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
		vddrfa1p7-supply = <&vreg_pmu_rfa_1p7>;
		vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;

		max-speed = <3200000>;

		qcom,local-bd-address-broken;
	};
};

&ufs_mem_hc {
	reset-gpios = <&tlmm 175 GPIO_ACTIVE_LOW>;

	vcc-supply = <&vreg_l7b_2p96>;
	vcc-max-microamp = <800000>;

	vccq-supply = <&vreg_l9b_1p2>;
	vccq-max-microamp = <900000>;

	status = "okay";
};

&ufs_mem_phy {
	vdda-phy-supply = <&vdd_a_ufs_0_core>;
	vdda-pll-supply = <&vdd_a_ufs_0_1p2>;

	status = "okay";
};

&usb_1 {
	/* USB 2.0 only */
	qcom,select-utmi-as-pipe-clk;
	maximum-speed = "high-speed";

	/* Remove USB3 phy */
	phys = <&usb_1_hsphy>;
	phy-names = "usb2-phy";

	status = "okay";
};

&usb_1_dwc3_hs {
	remote-endpoint = <&pmic_glink_hs_in>;
};

&usb_1_hsphy {
	vdda-pll-supply = <&vdd_a_usbhs_core>;
	vdda18-supply = <&vdd_a_usbhs_1p8>;
	vdda33-supply = <&vdd_a_usbhs_3p1>;

	status = "okay";
};

&venus {
	firmware-name = "qcom/sm7325/motorola/dubai/vpu20_1v.mbn";

	status = "okay";
};

&wifi {
	qcom,calibration-variant = "Motorola_dubai";

	status = "okay";
};