1038 lines
24 KiB
Devicetree
1038 lines
24 KiB
Devicetree
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
|
/*
|
|
* Copyright 2025 NXP
|
|
*/
|
|
|
|
/dts-v1/;
|
|
|
|
#include <dt-bindings/leds/common.h>
|
|
#include <dt-bindings/phy/phy-imx8-pcie.h>
|
|
#include <dt-bindings/pwm/pwm.h>
|
|
#include <dt-bindings/usb/pd.h>
|
|
#include "imx95.dtsi"
|
|
|
|
#define BRD_SM_CTRL_SD3_WAKE 0x8000 /*!< PCAL6408A-0 */
|
|
#define BRD_SM_CTRL_PCIE1_WAKE 0x8001 /*!< PCAL6408A-4 */
|
|
#define BRD_SM_CTRL_BT_WAKE 0x8002 /*!< PCAL6408A-5 */
|
|
#define BRD_SM_CTRL_PCIE2_WAKE 0x8003 /*!< PCAL6408A-6 */
|
|
#define BRD_SM_CTRL_BUTTON 0x8004 /*!< PCAL6408A-7 */
|
|
|
|
/ {
|
|
compatible = "fsl,imx95-15x15-frdm", "fsl,imx95";
|
|
model = "NXP i.MX95 15X15 FRDM board";
|
|
|
|
aliases {
|
|
ethernet0 = &enetc_port0;
|
|
ethernet1 = &enetc_port1;
|
|
gpio0 = &gpio1;
|
|
gpio1 = &gpio2;
|
|
gpio2 = &gpio3;
|
|
gpio3 = &gpio4;
|
|
gpio4 = &gpio5;
|
|
i2c0 = &lpi2c1;
|
|
i2c1 = &lpi2c2;
|
|
i2c2 = &lpi2c3;
|
|
i2c3 = &lpi2c4;
|
|
i2c4 = &lpi2c5;
|
|
i2c5 = &lpi2c6;
|
|
i2c6 = &lpi2c7;
|
|
i2c7 = &lpi2c8;
|
|
mmc0 = &usdhc1;
|
|
mmc1 = &usdhc2;
|
|
mmc2 = &usdhc3;
|
|
serial0 = &lpuart1;
|
|
serial4 = &lpuart5;
|
|
};
|
|
|
|
chosen {
|
|
#address-cells = <2>;
|
|
#size-cells = <2>;
|
|
stdout-path = &lpuart1;
|
|
};
|
|
|
|
dmic: dmic {
|
|
compatible = "dmic-codec";
|
|
#sound-dai-cells = <0>;
|
|
num-channels = <2>;
|
|
};
|
|
|
|
flexcan2_phy: can-phy {
|
|
compatible = "nxp,tja1051";
|
|
#phy-cells = <0>;
|
|
max-bitrate = <5000000>;
|
|
/*
|
|
* Shared SILENT GPIO: CAN PHYs enter silent mode
|
|
* together (hardware design).
|
|
*/
|
|
silent-gpios = <&pcal6524 7 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
flexcan5_phy: can-phy {
|
|
compatible = "nxp,tja1051";
|
|
#phy-cells = <0>;
|
|
max-bitrate = <5000000>;
|
|
silent-gpios = <&pcal6524 7 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
reg_1p8v: regulator-1p8v {
|
|
compatible = "regulator-fixed";
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-name = "+V1.8_SW";
|
|
};
|
|
|
|
reg_3p3v: regulator-3p3v {
|
|
compatible = "regulator-fixed";
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-name = "+V3.3_SW";
|
|
};
|
|
|
|
reg_5p0v: regulator-5p0v {
|
|
compatible = "regulator-fixed";
|
|
regulator-max-microvolt = <5000000>;
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-name = "+V5.0_SW";
|
|
};
|
|
|
|
reg_ext_3v3: regulator-ext-3v3 {
|
|
compatible = "regulator-fixed";
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-name = "VCCEXT_3V3";
|
|
};
|
|
|
|
reg_ext_5v: regulator-ext-5v {
|
|
compatible = "regulator-fixed";
|
|
regulator-always-on;
|
|
regulator-max-microvolt = <5000000>;
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-name = "VCCEXT_5V";
|
|
gpio = <&pcal6524 12 GPIO_ACTIVE_HIGH>;
|
|
enable-active-high;
|
|
};
|
|
|
|
reg_m2_ekey_pwr: regulator-m2-pwr {
|
|
compatible = "regulator-fixed";
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-name = "M.2-power-ekey";
|
|
gpio = <&pcal6524 16 GPIO_ACTIVE_HIGH>;
|
|
enable-active-high;
|
|
};
|
|
|
|
reg_m2_mkey_pwr: regulator-m2-mkey-pwr {
|
|
compatible = "regulator-fixed";
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-name = "M.2-mkey-power";
|
|
gpio = <&pcal6524 14 GPIO_ACTIVE_HIGH>;
|
|
enable-active-high;
|
|
};
|
|
|
|
reg_usdhc2_vmmc: regulator-usdhc2 {
|
|
compatible = "regulator-fixed";
|
|
off-on-delay-us = <12000>;
|
|
pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
|
|
pinctrl-names = "default";
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-name = "VDD_SD2_3V3";
|
|
gpio = <&gpio3 7 GPIO_ACTIVE_HIGH>;
|
|
enable-active-high;
|
|
};
|
|
|
|
reg_usdhc3_vmmc: regulator-usdhc3 {
|
|
compatible = "regulator-fixed";
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-name = "WLAN_EN";
|
|
vin-supply = <®_m2_ekey_pwr>;
|
|
gpio = <&pcal6524 9 GPIO_ACTIVE_HIGH>;
|
|
enable-active-high;
|
|
/*
|
|
* IW612 wifi chip needs more delay than other wifi chips to complete
|
|
* the host interface initialization after power up, otherwise the
|
|
* internal state of IW612 may be unstable, resulting in the failure of
|
|
* the SDIO3.0 switch voltage.
|
|
*/
|
|
startup-delay-us = <20000>;
|
|
};
|
|
|
|
reg_usb_vbus: regulator-vbus {
|
|
compatible = "regulator-fixed";
|
|
regulator-max-microvolt = <5000000>;
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-name = "USB_VBUS";
|
|
gpio = <&pcal6524 15 GPIO_ACTIVE_HIGH>;
|
|
enable-active-high;
|
|
};
|
|
|
|
reg_vref_1v8: regulator-adc-vref {
|
|
compatible = "regulator-fixed";
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-name = "vref_1v8";
|
|
};
|
|
|
|
reserved-memory {
|
|
ranges;
|
|
#address-cells = <2>;
|
|
#size-cells = <2>;
|
|
|
|
linux_cma: linux,cma {
|
|
compatible = "shared-dma-pool";
|
|
alloc-ranges = <0 0x80000000 0 0x7F000000>;
|
|
reusable;
|
|
size = <0 0x3c000000>;
|
|
linux,cma-default;
|
|
};
|
|
|
|
vdev0vring0: memory@88000000 {
|
|
reg = <0 0x88000000 0 0x8000>;
|
|
no-map;
|
|
};
|
|
|
|
vdev0vring1: memory@88008000 {
|
|
reg = <0 0x88008000 0 0x8000>;
|
|
no-map;
|
|
};
|
|
|
|
vdev1vring0: memory@88010000 {
|
|
reg = <0 0x88010000 0 0x8000>;
|
|
no-map;
|
|
};
|
|
|
|
vdev1vring1: memory@88018000 {
|
|
reg = <0 0x88018000 0 0x8000>;
|
|
no-map;
|
|
};
|
|
|
|
vdevbuffer: memory@88020000 {
|
|
compatible = "shared-dma-pool";
|
|
reg = <0 0x88020000 0 0x100000>;
|
|
no-map;
|
|
};
|
|
|
|
rsc_table: memory@88220000 {
|
|
reg = <0 0x88220000 0 0x1000>;
|
|
no-map;
|
|
};
|
|
|
|
vpu_boot: memory@a0000000 {
|
|
reg = <0 0xa0000000 0 0x100000>;
|
|
no-map;
|
|
};
|
|
};
|
|
|
|
sound-micfil {
|
|
compatible = "fsl,imx-audio-card";
|
|
model = "micfil-audio";
|
|
|
|
pri-dai-link {
|
|
link-name = "micfil hifi";
|
|
format = "i2s";
|
|
|
|
cpu {
|
|
sound-dai = <&micfil>;
|
|
};
|
|
|
|
codec {
|
|
sound-dai = <&dmic>;
|
|
};
|
|
};
|
|
};
|
|
|
|
sound-mqs {
|
|
compatible = "audio-graph-card2";
|
|
links = <&sai1_port1>;
|
|
label = "mqs-audio";
|
|
};
|
|
|
|
usdhc3_pwrseq: usdhc3-pwrseq {
|
|
compatible = "mmc-pwrseq-simple";
|
|
reset-gpios = <&pcal6524 8 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
memory@80000000 {
|
|
reg = <0x0 0x80000000 0 0x80000000>;
|
|
device_type = "memory";
|
|
};
|
|
};
|
|
|
|
&adc1 {
|
|
vref-supply = <®_vref_1v8>;
|
|
status = "okay";
|
|
};
|
|
|
|
&enetc_port0 {
|
|
phy-handle = <ðphy0>;
|
|
phy-mode = "rgmii-id";
|
|
pinctrl-0 = <&pinctrl_enetc0>;
|
|
pinctrl-names = "default";
|
|
status = "okay";
|
|
};
|
|
|
|
&enetc_port1 {
|
|
phy-handle = <ðphy1>;
|
|
phy-mode = "rgmii-id";
|
|
pinctrl-0 = <&pinctrl_enetc1>;
|
|
pinctrl-names = "default";
|
|
status = "okay";
|
|
};
|
|
|
|
&flexcan2 {
|
|
pinctrl-0 = <&pinctrl_flexcan2>;
|
|
pinctrl-names = "default";
|
|
phys = <&flexcan2_phy>;
|
|
status = "okay";
|
|
};
|
|
|
|
&flexcan5 {
|
|
pinctrl-0 = <&pinctrl_flexcan5>;
|
|
pinctrl-names = "default";
|
|
phys = <&flexcan5_phy>;
|
|
status = "okay";
|
|
};
|
|
|
|
&lpi2c2 {
|
|
clock-frequency = <400000>;
|
|
pinctrl-0 = <&pinctrl_lpi2c2>;
|
|
pinctrl-names = "default";
|
|
status = "okay";
|
|
|
|
pcal6524: gpio@22 {
|
|
compatible = "nxp,pcal6524";
|
|
reg = <0x22>;
|
|
#interrupt-cells = <2>;
|
|
interrupt-controller;
|
|
interrupt-parent = <&gpio5>;
|
|
interrupts = <14 IRQ_TYPE_LEVEL_LOW>;
|
|
#gpio-cells = <2>;
|
|
gpio-controller;
|
|
pinctrl-0 = <&pinctrl_pcal6524>;
|
|
pinctrl-names = "default";
|
|
gpio-line-names = "ENET1 PHY reset",
|
|
"ENET2 PHY reset",
|
|
"SPI3/GPIO select",
|
|
"UART3/GPIO select",
|
|
"CAN2&5/GPIO select",
|
|
"PWM/GPIO select",
|
|
"Watch dog enable",
|
|
"CAN1&2&5 silent",
|
|
"SDIO_nRST",
|
|
"WL_nDISABLE1",
|
|
"WL_nDISABLE2",
|
|
"M.2 Mkey NC06",
|
|
"EXT_5V0_PWR_EN",
|
|
"EXT_3V3_PWR_EN",
|
|
"Mkey power control",
|
|
"USB2 power control",
|
|
"Ekey power control",
|
|
"MIPI-DSICSI reset",
|
|
"MIPI-DSI IO2",
|
|
"MIPI-CSI reset",
|
|
"LVDS TP reset",
|
|
"LVDS BL enable",
|
|
"LVDS BL power enable",
|
|
"IT6263 reset";
|
|
|
|
lpspi-gpio-sel-hog {
|
|
gpio-hog;
|
|
gpios = <2 GPIO_ACTIVE_HIGH>;
|
|
output-low;
|
|
};
|
|
|
|
lpuart-gpio-sel-hog {
|
|
gpio-hog;
|
|
gpios = <3 GPIO_ACTIVE_HIGH>;
|
|
output-low;
|
|
};
|
|
|
|
can-gpio-sel-hog {
|
|
gpio-hog;
|
|
gpios = <4 GPIO_ACTIVE_HIGH>;
|
|
output-low;
|
|
};
|
|
|
|
pwm-gpio-sel-hog {
|
|
gpio-hog;
|
|
gpios = <5 GPIO_ACTIVE_HIGH>;
|
|
output-high;
|
|
};
|
|
};
|
|
};
|
|
|
|
&lpi2c3 {
|
|
clock-frequency = <400000>;
|
|
pinctrl-0 = <&pinctrl_lpi2c3>;
|
|
pinctrl-names = "default";
|
|
status = "okay";
|
|
|
|
ptn5110: tcpc@50 {
|
|
compatible = "nxp,ptn5110", "tcpci";
|
|
reg = <0x50>;
|
|
interrupt-parent = <&gpio5>;
|
|
interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
|
|
pinctrl-0 = <&pinctrl_ptn5110>;
|
|
pinctrl-names = "default";
|
|
|
|
typec_con: connector {
|
|
compatible = "usb-c-connector";
|
|
data-role = "dual";
|
|
label = "USB-C";
|
|
op-sink-microwatt = <15000000>;
|
|
power-role = "dual";
|
|
self-powered;
|
|
sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)
|
|
PDO_VAR(5000, 20000, 3000)>;
|
|
source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
|
|
try-power-role = "sink";
|
|
|
|
ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
port@0 {
|
|
reg = <0>;
|
|
|
|
typec_con_hs: endpoint {
|
|
remote-endpoint = <&usb3_data_hs>;
|
|
};
|
|
};
|
|
|
|
port@1 {
|
|
reg = <1>;
|
|
|
|
typec_con_ss: endpoint {
|
|
remote-endpoint = <&usb3_data_ss>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&lpi2c4 {
|
|
clock-frequency = <400000>;
|
|
pinctrl-0 = <&pinctrl_lpi2c4>;
|
|
pinctrl-names = "default";
|
|
status = "okay";
|
|
|
|
pca9632: led-controller@62 {
|
|
compatible = "nxp,pca9632";
|
|
reg = <0x62>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
nxp,inverted-out;
|
|
|
|
led_backlight0: led@0 {
|
|
reg = <0>;
|
|
color = <LED_COLOR_ID_WHITE>;
|
|
function = LED_FUNCTION_BACKLIGHT;
|
|
function-enumerator = <0>;
|
|
};
|
|
|
|
led_backlight1: led@1 {
|
|
reg = <1>;
|
|
color = <LED_COLOR_ID_WHITE>;
|
|
function = LED_FUNCTION_BACKLIGHT;
|
|
function-enumerator = <1>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&lpuart1 {
|
|
pinctrl-0 = <&pinctrl_uart1>;
|
|
pinctrl-names = "default";
|
|
status = "okay";
|
|
};
|
|
|
|
&lpuart5 {
|
|
pinctrl-0 = <&pinctrl_uart5>;
|
|
pinctrl-names = "default";
|
|
status = "okay";
|
|
|
|
bluetooth {
|
|
compatible = "nxp,88w8987-bt";
|
|
};
|
|
};
|
|
|
|
&micfil {
|
|
assigned-clocks = <&scmi_clk IMX95_CLK_AUDIOPLL1_VCO>,
|
|
<&scmi_clk IMX95_CLK_AUDIOPLL2_VCO>,
|
|
<&scmi_clk IMX95_CLK_AUDIOPLL1>,
|
|
<&scmi_clk IMX95_CLK_AUDIOPLL2>,
|
|
<&scmi_clk IMX95_CLK_PDM>;
|
|
assigned-clock-parents = <0>, <0>, <0>, <0>,
|
|
<&scmi_clk IMX95_CLK_AUDIOPLL1>;
|
|
assigned-clock-rates = <3932160000>,
|
|
<3612672000>, <393216000>,
|
|
<361267200>, <49152000>;
|
|
#sound-dai-cells = <0>;
|
|
pinctrl-0 = <&pinctrl_pdm>;
|
|
pinctrl-names = "default";
|
|
status = "okay";
|
|
};
|
|
|
|
&mu7 {
|
|
status = "okay";
|
|
};
|
|
|
|
&mqs1 {
|
|
clocks = <&scmi_clk IMX95_CLK_SAI1>;
|
|
clock-names = "mclk";
|
|
pinctrl-0 = <&pinctrl_mqs1>;
|
|
pinctrl-names = "default";
|
|
status = "okay";
|
|
|
|
mqs1_port: port {
|
|
mqs1_ep: endpoint {
|
|
dai-format = "left_j";
|
|
remote-endpoint = <&sai1_port1_ep>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&netc_blk_ctrl {
|
|
status = "okay";
|
|
};
|
|
|
|
/* Configure MSI and IOMMU mappings specific to the i.MX95 15x15 FRDM board. */
|
|
&netc_bus0 {
|
|
msi-map = <0x0 &its 0x60 0x1>, //ENETC0 PF
|
|
<0x10 &its 0x61 0x1>, //ENETC0 VF0
|
|
<0x20 &its 0x62 0x1>, //ENETC0 VF1
|
|
<0x40 &its 0x63 0x1>, //ENETC1 PF
|
|
<0x50 &its 0x65 0x1>, //ENETC1 VF0
|
|
<0x60 &its 0x66 0x1>, //ENETC1 VF1
|
|
<0x80 &its 0x64 0x1>, //ENETC2 PF
|
|
<0xc0 &its 0x67 0x1>; //NETC Timer
|
|
iommu-map = <0x0 &smmu 0x20 0x1>,
|
|
<0x10 &smmu 0x21 0x1>,
|
|
<0x20 &smmu 0x22 0x1>,
|
|
<0x40 &smmu 0x23 0x1>,
|
|
<0x50 &smmu 0x25 0x1>,
|
|
<0x60 &smmu 0x26 0x1>,
|
|
<0x80 &smmu 0x24 0x1>,
|
|
<0xc0 &smmu 0x27 0x1>;
|
|
};
|
|
|
|
&netc_emdio {
|
|
pinctrl-0 = <&pinctrl_emdio>;
|
|
pinctrl-names = "default";
|
|
status = "okay";
|
|
|
|
ethphy0: ethernet-phy@1 {
|
|
reg = <1>;
|
|
reset-assert-us = <10000>;
|
|
reset-deassert-us = <80000>;
|
|
reset-gpios = <&pcal6524 0 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
ethphy1: ethernet-phy@2 {
|
|
reg = <2>;
|
|
reset-assert-us = <10000>;
|
|
reset-deassert-us = <80000>;
|
|
reset-gpios = <&pcal6524 1 GPIO_ACTIVE_LOW>;
|
|
};
|
|
};
|
|
|
|
&netc_timer {
|
|
status = "okay";
|
|
};
|
|
|
|
&netcmix_blk_ctrl {
|
|
status = "okay";
|
|
};
|
|
|
|
&pcie0 {
|
|
pinctrl-0 = <&pinctrl_pcie0>;
|
|
pinctrl-names = "default";
|
|
reset-gpio = <&gpio5 13 GPIO_ACTIVE_LOW>;
|
|
supports-clkreq;
|
|
vpcie-supply = <®_m2_mkey_pwr>;
|
|
status = "okay";
|
|
};
|
|
|
|
&sai1 {
|
|
clocks = <&scmi_clk IMX95_CLK_BUSAON>, <&dummy>,
|
|
<&scmi_clk IMX95_CLK_SAI1>, <&dummy>,
|
|
<&dummy>, <&scmi_clk IMX95_CLK_AUDIOPLL1>,
|
|
<&scmi_clk IMX95_CLK_AUDIOPLL2>;
|
|
clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3", "pll8k", "pll11k";
|
|
assigned-clocks = <&scmi_clk IMX95_CLK_AUDIOPLL1_VCO>,
|
|
<&scmi_clk IMX95_CLK_AUDIOPLL2_VCO>,
|
|
<&scmi_clk IMX95_CLK_AUDIOPLL1>,
|
|
<&scmi_clk IMX95_CLK_AUDIOPLL2>,
|
|
<&scmi_clk IMX95_CLK_SAI1>;
|
|
assigned-clock-parents = <0>, <0>, <0>, <0>, <&scmi_clk IMX95_CLK_AUDIOPLL1>;
|
|
assigned-clock-rates = <3932160000>, <3612672000>,
|
|
<393216000>, <361267200>,
|
|
<24576000>;
|
|
fsl,sai-mclk-direction-output;
|
|
status = "okay";
|
|
|
|
ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
/* leave unconnected - no RX in the context of MQS */
|
|
port@0 {
|
|
reg = <0>;
|
|
|
|
endpoint {
|
|
};
|
|
};
|
|
|
|
sai1_port1: port@1 {
|
|
reg = <1>;
|
|
mclk-fs = <512>;
|
|
|
|
sai1_port1_ep: endpoint {
|
|
dai-format = "left_j";
|
|
system-clock-direction-out;
|
|
bitclock-master;
|
|
frame-master;
|
|
remote-endpoint = <&mqs1_ep>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&scmi_iomuxc {
|
|
pinctrl_emdio: emdiogrp {
|
|
fsl,pins = <
|
|
IMX95_PAD_ENET2_MDC__NETCMIX_TOP_NETC_MDC 0x50e
|
|
IMX95_PAD_ENET2_MDIO__NETCMIX_TOP_NETC_MDIO 0x90e
|
|
>;
|
|
};
|
|
|
|
pinctrl_enetc0: enetc0grp {
|
|
fsl,pins = <
|
|
IMX95_PAD_ENET1_TD3__NETCMIX_TOP_ETH0_RGMII_TD3 0x50e
|
|
IMX95_PAD_ENET1_TD2__NETCMIX_TOP_ETH0_RGMII_TD2 0x50e
|
|
IMX95_PAD_ENET1_TD1__NETCMIX_TOP_ETH0_RGMII_TD1 0x50e
|
|
IMX95_PAD_ENET1_TD0__NETCMIX_TOP_ETH0_RGMII_TD0 0x50e
|
|
IMX95_PAD_ENET1_TX_CTL__NETCMIX_TOP_ETH0_RGMII_TX_CTL 0x57e
|
|
IMX95_PAD_ENET1_TXC__NETCMIX_TOP_ETH0_RGMII_TX_CLK 0x58e
|
|
IMX95_PAD_ENET1_RX_CTL__NETCMIX_TOP_ETH0_RGMII_RX_CTL 0x57e
|
|
IMX95_PAD_ENET1_RXC__NETCMIX_TOP_ETH0_RGMII_RX_CLK 0x58e
|
|
IMX95_PAD_ENET1_RD0__NETCMIX_TOP_ETH0_RGMII_RD0 0x57e
|
|
IMX95_PAD_ENET1_RD1__NETCMIX_TOP_ETH0_RGMII_RD1 0x57e
|
|
IMX95_PAD_ENET1_RD2__NETCMIX_TOP_ETH0_RGMII_RD2 0x57e
|
|
IMX95_PAD_ENET1_RD3__NETCMIX_TOP_ETH0_RGMII_RD3 0x57e
|
|
>;
|
|
};
|
|
|
|
pinctrl_enetc1: enetc1grp {
|
|
fsl,pins = <
|
|
IMX95_PAD_ENET2_TD3__NETCMIX_TOP_ETH1_RGMII_TD3 0x50e
|
|
IMX95_PAD_ENET2_TD2__NETCMIX_TOP_ETH1_RGMII_TD2 0x50e
|
|
IMX95_PAD_ENET2_TD1__NETCMIX_TOP_ETH1_RGMII_TD1 0x50e
|
|
IMX95_PAD_ENET2_TD0__NETCMIX_TOP_ETH1_RGMII_TD0 0x50e
|
|
IMX95_PAD_ENET2_TX_CTL__NETCMIX_TOP_ETH1_RGMII_TX_CTL 0x57e
|
|
IMX95_PAD_ENET2_TXC__NETCMIX_TOP_ETH1_RGMII_TX_CLK 0x58e
|
|
IMX95_PAD_ENET2_RX_CTL__NETCMIX_TOP_ETH1_RGMII_RX_CTL 0x57e
|
|
IMX95_PAD_ENET2_RXC__NETCMIX_TOP_ETH1_RGMII_RX_CLK 0x58e
|
|
IMX95_PAD_ENET2_RD0__NETCMIX_TOP_ETH1_RGMII_RD0 0x57e
|
|
IMX95_PAD_ENET2_RD1__NETCMIX_TOP_ETH1_RGMII_RD1 0x57e
|
|
IMX95_PAD_ENET2_RD2__NETCMIX_TOP_ETH1_RGMII_RD2 0x57e
|
|
IMX95_PAD_ENET2_RD3__NETCMIX_TOP_ETH1_RGMII_RD3 0x57e
|
|
>;
|
|
};
|
|
|
|
pinctrl_flexcan2: flexcan2grp {
|
|
fsl,pins = <
|
|
IMX95_PAD_GPIO_IO25__CAN2_TX 0x39e
|
|
IMX95_PAD_GPIO_IO27__CAN2_RX 0x39e
|
|
>;
|
|
};
|
|
|
|
pinctrl_flexcan5: flexcan5grp {
|
|
fsl,pins = <
|
|
IMX95_PAD_GPIO_IO22__CAN5_TX 0x39e
|
|
IMX95_PAD_GPIO_IO23__CAN5_RX 0x39e
|
|
>;
|
|
};
|
|
|
|
pinctrl_lpi2c1: lpi2c1grp {
|
|
fsl,pins = <
|
|
IMX95_PAD_I2C1_SCL__AONMIX_TOP_LPI2C1_SCL 0x40000b9e
|
|
IMX95_PAD_I2C1_SDA__AONMIX_TOP_LPI2C1_SDA 0x40000b9e
|
|
>;
|
|
};
|
|
|
|
pinctrl_lpi2c2: lpi2c2grp {
|
|
fsl,pins = <
|
|
IMX95_PAD_I2C2_SCL__AONMIX_TOP_LPI2C2_SCL 0x40000b9e
|
|
IMX95_PAD_I2C2_SDA__AONMIX_TOP_LPI2C2_SDA 0x40000b9e
|
|
>;
|
|
};
|
|
|
|
pinctrl_lpi2c3: lpi2c3grp {
|
|
fsl,pins = <
|
|
IMX95_PAD_GPIO_IO28__LPI2C3_SDA 0x40000b9e
|
|
IMX95_PAD_GPIO_IO29__LPI2C3_SCL 0x40000b9e
|
|
>;
|
|
};
|
|
|
|
pinctrl_lpi2c4: lpi2c4grp {
|
|
fsl,pins = <
|
|
IMX95_PAD_GPIO_IO30__LPI2C4_SDA 0x40000b9e
|
|
IMX95_PAD_GPIO_IO31__LPI2C4_SCL 0x40000b9e
|
|
>;
|
|
};
|
|
|
|
pinctrl_mqs1: mqs1grp {
|
|
fsl,pins = <
|
|
IMX95_PAD_SAI1_TXFS__AONMIX_TOP_MQS1_LEFT 0x31e
|
|
IMX95_PAD_SAI1_RXD0__AONMIX_TOP_MQS1_RIGHT 0x31e
|
|
>;
|
|
};
|
|
|
|
pinctrl_pcal6524: pcal6524grp {
|
|
fsl,pins = <
|
|
IMX95_PAD_GPIO_IO34__GPIO5_IO_BIT14 0x31e
|
|
>;
|
|
};
|
|
|
|
pinctrl_pcie0: pcie0grp {
|
|
fsl,pins = <
|
|
IMX95_PAD_GPIO_IO32__HSIOMIX_TOP_PCIE1_CLKREQ_B 0x40000b1e
|
|
IMX95_PAD_GPIO_IO33__GPIO5_IO_BIT13 0x31e
|
|
>;
|
|
};
|
|
|
|
pinctrl_pdm: pdmgrp {
|
|
fsl,pins = <
|
|
IMX95_PAD_PDM_CLK__AONMIX_TOP_PDM_CLK 0x31e
|
|
IMX95_PAD_PDM_BIT_STREAM0__AONMIX_TOP_PDM_BIT_STREAM_BIT0 0x31e
|
|
>;
|
|
};
|
|
|
|
pinctrl_ptn5110: ptn5110grp {
|
|
fsl,pins = <
|
|
IMX95_PAD_XSPI1_DATA3__GPIO5_IO_BIT3 0x31e
|
|
>;
|
|
};
|
|
|
|
pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
|
|
fsl,pins = <
|
|
IMX95_PAD_SD2_RESET_B__GPIO3_IO_BIT7 0x31e
|
|
>;
|
|
};
|
|
|
|
pinctrl_uart1: uart1grp {
|
|
fsl,pins = <
|
|
IMX95_PAD_UART1_RXD__AONMIX_TOP_LPUART1_RX 0x31e
|
|
IMX95_PAD_UART1_TXD__AONMIX_TOP_LPUART1_TX 0x31e
|
|
>;
|
|
};
|
|
|
|
pinctrl_uart5: uart5grp {
|
|
fsl,pins = <
|
|
IMX95_PAD_DAP_TDO_TRACESWO__LPUART5_TX 0x31e
|
|
IMX95_PAD_DAP_TDI__LPUART5_RX 0x31e
|
|
IMX95_PAD_DAP_TMS_SWDIO__LPUART5_RTS_B 0x31e
|
|
IMX95_PAD_DAP_TCLK_SWCLK__LPUART5_CTS_B 0x31e
|
|
>;
|
|
};
|
|
|
|
pinctrl_usdhc1: usdhc1grp {
|
|
fsl,pins = <
|
|
IMX95_PAD_SD1_CLK__USDHC1_CLK 0x158e
|
|
IMX95_PAD_SD1_CMD__USDHC1_CMD 0x138e
|
|
IMX95_PAD_SD1_DATA0__USDHC1_DATA0 0x138e
|
|
IMX95_PAD_SD1_DATA1__USDHC1_DATA1 0x138e
|
|
IMX95_PAD_SD1_DATA2__USDHC1_DATA2 0x138e
|
|
IMX95_PAD_SD1_DATA3__USDHC1_DATA3 0x138e
|
|
IMX95_PAD_SD1_DATA4__USDHC1_DATA4 0x138e
|
|
IMX95_PAD_SD1_DATA5__USDHC1_DATA5 0x138e
|
|
IMX95_PAD_SD1_DATA6__USDHC1_DATA6 0x138e
|
|
IMX95_PAD_SD1_DATA7__USDHC1_DATA7 0x138e
|
|
IMX95_PAD_SD1_STROBE__USDHC1_STROBE 0x158e
|
|
>;
|
|
};
|
|
|
|
pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
|
|
fsl,pins = <
|
|
IMX95_PAD_SD1_CLK__USDHC1_CLK 0x158e
|
|
IMX95_PAD_SD1_CMD__USDHC1_CMD 0x138e
|
|
IMX95_PAD_SD1_DATA0__USDHC1_DATA0 0x138e
|
|
IMX95_PAD_SD1_DATA1__USDHC1_DATA1 0x138e
|
|
IMX95_PAD_SD1_DATA2__USDHC1_DATA2 0x138e
|
|
IMX95_PAD_SD1_DATA3__USDHC1_DATA3 0x138e
|
|
IMX95_PAD_SD1_DATA4__USDHC1_DATA4 0x138e
|
|
IMX95_PAD_SD1_DATA5__USDHC1_DATA5 0x138e
|
|
IMX95_PAD_SD1_DATA6__USDHC1_DATA6 0x138e
|
|
IMX95_PAD_SD1_DATA7__USDHC1_DATA7 0x138e
|
|
IMX95_PAD_SD1_STROBE__USDHC1_STROBE 0x158e
|
|
>;
|
|
};
|
|
|
|
pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
|
|
fsl,pins = <
|
|
IMX95_PAD_SD1_CLK__USDHC1_CLK 0x15fe
|
|
IMX95_PAD_SD1_CMD__USDHC1_CMD 0x13fe
|
|
IMX95_PAD_SD1_DATA0__USDHC1_DATA0 0x13fe
|
|
IMX95_PAD_SD1_DATA1__USDHC1_DATA1 0x13fe
|
|
IMX95_PAD_SD1_DATA2__USDHC1_DATA2 0x13fe
|
|
IMX95_PAD_SD1_DATA3__USDHC1_DATA3 0x13fe
|
|
IMX95_PAD_SD1_DATA4__USDHC1_DATA4 0x13fe
|
|
IMX95_PAD_SD1_DATA5__USDHC1_DATA5 0x13fe
|
|
IMX95_PAD_SD1_DATA6__USDHC1_DATA6 0x13fe
|
|
IMX95_PAD_SD1_DATA7__USDHC1_DATA7 0x13fe
|
|
IMX95_PAD_SD1_STROBE__USDHC1_STROBE 0x15fe
|
|
>;
|
|
};
|
|
|
|
pinctrl_usdhc2_gpio: usdhc2gpiogrp {
|
|
fsl,pins = <
|
|
IMX95_PAD_SD2_CD_B__GPIO3_IO_BIT0 0x31e
|
|
>;
|
|
};
|
|
|
|
pinctrl_usdhc2: usdhc2grp {
|
|
fsl,pins = <
|
|
IMX95_PAD_SD2_CLK__USDHC2_CLK 0x158e
|
|
IMX95_PAD_SD2_CMD__USDHC2_CMD 0x138e
|
|
IMX95_PAD_SD2_DATA0__USDHC2_DATA0 0x138e
|
|
IMX95_PAD_SD2_DATA1__USDHC2_DATA1 0x138e
|
|
IMX95_PAD_SD2_DATA2__USDHC2_DATA2 0x138e
|
|
IMX95_PAD_SD2_DATA3__USDHC2_DATA3 0x138e
|
|
IMX95_PAD_SD2_VSELECT__USDHC2_VSELECT 0x51e
|
|
>;
|
|
};
|
|
|
|
pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
|
|
fsl,pins = <
|
|
IMX95_PAD_SD2_CLK__USDHC2_CLK 0x158e
|
|
IMX95_PAD_SD2_CMD__USDHC2_CMD 0x138e
|
|
IMX95_PAD_SD2_DATA0__USDHC2_DATA0 0x138e
|
|
IMX95_PAD_SD2_DATA1__USDHC2_DATA1 0x138e
|
|
IMX95_PAD_SD2_DATA2__USDHC2_DATA2 0x138e
|
|
IMX95_PAD_SD2_DATA3__USDHC2_DATA3 0x138e
|
|
IMX95_PAD_SD2_VSELECT__USDHC2_VSELECT 0x51e
|
|
>;
|
|
};
|
|
|
|
pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
|
|
fsl,pins = <
|
|
IMX95_PAD_SD2_CLK__USDHC2_CLK 0x158e
|
|
IMX95_PAD_SD2_CMD__USDHC2_CMD 0x138e
|
|
IMX95_PAD_SD2_DATA0__USDHC2_DATA0 0x138e
|
|
IMX95_PAD_SD2_DATA1__USDHC2_DATA1 0x138e
|
|
IMX95_PAD_SD2_DATA2__USDHC2_DATA2 0x138e
|
|
IMX95_PAD_SD2_DATA3__USDHC2_DATA3 0x138e
|
|
IMX95_PAD_SD2_VSELECT__USDHC2_VSELECT 0x51e
|
|
>;
|
|
};
|
|
|
|
pinctrl_usdhc3: usdhc3grp {
|
|
fsl,pins = <
|
|
IMX95_PAD_SD3_CLK__USDHC3_CLK 0x158e
|
|
IMX95_PAD_SD3_CMD__USDHC3_CMD 0x138e
|
|
IMX95_PAD_SD3_DATA0__USDHC3_DATA0 0x138e
|
|
IMX95_PAD_SD3_DATA1__USDHC3_DATA1 0x138e
|
|
IMX95_PAD_SD3_DATA2__USDHC3_DATA2 0x138e
|
|
IMX95_PAD_SD3_DATA3__USDHC3_DATA3 0x138e
|
|
>;
|
|
};
|
|
|
|
pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
|
|
fsl,pins = <
|
|
IMX95_PAD_SD3_CLK__USDHC3_CLK 0x158e
|
|
IMX95_PAD_SD3_CMD__USDHC3_CMD 0x138e
|
|
IMX95_PAD_SD3_DATA0__USDHC3_DATA0 0x138e
|
|
IMX95_PAD_SD3_DATA1__USDHC3_DATA1 0x138e
|
|
IMX95_PAD_SD3_DATA2__USDHC3_DATA2 0x138e
|
|
IMX95_PAD_SD3_DATA3__USDHC3_DATA3 0x138e
|
|
>;
|
|
};
|
|
|
|
pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
|
|
fsl,pins = <
|
|
IMX95_PAD_SD3_CLK__USDHC3_CLK 0x15fe
|
|
IMX95_PAD_SD3_CMD__USDHC3_CMD 0x13fe
|
|
IMX95_PAD_SD3_DATA0__USDHC3_DATA0 0x13fe
|
|
IMX95_PAD_SD3_DATA1__USDHC3_DATA1 0x13fe
|
|
IMX95_PAD_SD3_DATA2__USDHC3_DATA2 0x13fe
|
|
IMX95_PAD_SD3_DATA3__USDHC3_DATA3 0x13fe
|
|
>;
|
|
};
|
|
};
|
|
|
|
&scmi_misc {
|
|
nxp,ctrl-ids = <BRD_SM_CTRL_SD3_WAKE 1
|
|
BRD_SM_CTRL_PCIE1_WAKE 1
|
|
BRD_SM_CTRL_BT_WAKE 1
|
|
BRD_SM_CTRL_PCIE2_WAKE 1
|
|
BRD_SM_CTRL_BUTTON 1>;
|
|
};
|
|
|
|
&thermal_zones {
|
|
pf09-thermal {
|
|
polling-delay = <2000>;
|
|
polling-delay-passive = <250>;
|
|
thermal-sensors = <&scmi_sensor 2>;
|
|
|
|
trips {
|
|
pf09_alert: trip0 {
|
|
hysteresis = <2000>;
|
|
temperature = <140000>;
|
|
type = "passive";
|
|
};
|
|
|
|
pf09_crit: trip1 {
|
|
hysteresis = <2000>;
|
|
temperature = <155000>;
|
|
type = "critical";
|
|
};
|
|
};
|
|
};
|
|
|
|
pf53arm-thermal {
|
|
polling-delay = <2000>;
|
|
polling-delay-passive = <250>;
|
|
thermal-sensors = <&scmi_sensor 4>;
|
|
|
|
cooling-maps {
|
|
map0 {
|
|
cooling-device = <&A55_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
|
|
<&A55_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
|
|
<&A55_2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
|
|
<&A55_3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
|
|
<&A55_4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
|
|
<&A55_5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
|
|
trip = <&pf5301_alert>;
|
|
};
|
|
};
|
|
|
|
trips {
|
|
pf5301_alert: trip0 {
|
|
hysteresis = <2000>;
|
|
temperature = <140000>;
|
|
type = "passive";
|
|
};
|
|
|
|
pf5301_crit: trip1 {
|
|
hysteresis = <2000>;
|
|
temperature = <155000>;
|
|
type = "critical";
|
|
};
|
|
};
|
|
};
|
|
|
|
pf53soc-thermal {
|
|
polling-delay = <2000>;
|
|
polling-delay-passive = <250>;
|
|
thermal-sensors = <&scmi_sensor 3>;
|
|
|
|
trips {
|
|
pf5302_alert: trip0 {
|
|
hysteresis = <2000>;
|
|
temperature = <140000>;
|
|
type = "passive";
|
|
};
|
|
|
|
pf5302_crit: trip1 {
|
|
hysteresis = <2000>;
|
|
temperature = <155000>;
|
|
type = "critical";
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&usb2 {
|
|
disable-over-current;
|
|
dr_mode = "host";
|
|
vbus-supply = <®_usb_vbus>;
|
|
status = "okay";
|
|
};
|
|
|
|
&usb3 {
|
|
status = "okay";
|
|
};
|
|
|
|
&usb3_dwc3 {
|
|
adp-disable;
|
|
dr_mode = "otg";
|
|
hnp-disable;
|
|
role-switch-default-mode = "peripheral";
|
|
srp-disable;
|
|
usb-role-switch;
|
|
snps,dis-u1-entry-quirk;
|
|
snps,dis-u2-entry-quirk;
|
|
status = "okay";
|
|
|
|
port {
|
|
usb3_data_hs: endpoint {
|
|
remote-endpoint = <&typec_con_hs>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&usb3_phy {
|
|
orientation-switch;
|
|
fsl,phy-pcs-tx-deemph-3p5db-attenuation-db = <17>;
|
|
fsl,phy-pcs-tx-swing-full-percent = <100>;
|
|
fsl,phy-tx-preemp-amp-tune-microamp = <600>;
|
|
fsl,phy-tx-vboost-level-microvolt = <1156>;
|
|
fsl,phy-tx-vref-tune-percent = <100>;
|
|
status = "okay";
|
|
|
|
port {
|
|
usb3_data_ss: endpoint {
|
|
remote-endpoint = <&typec_con_ss>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&usdhc1 {
|
|
bus-width = <8>;
|
|
non-removable;
|
|
no-sd;
|
|
no-sdio;
|
|
pinctrl-0 = <&pinctrl_usdhc1>;
|
|
pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
|
|
pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
|
|
pinctrl-3 = <&pinctrl_usdhc1>;
|
|
pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
|
|
fsl,tuning-step = <1>;
|
|
status = "okay";
|
|
};
|
|
|
|
&usdhc2 {
|
|
bus-width = <4>;
|
|
cd-gpios = <&gpio3 00 GPIO_ACTIVE_LOW>;
|
|
pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
|
|
pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
|
|
pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
|
|
pinctrl-3 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
|
|
pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
|
|
vmmc-supply = <®_usdhc2_vmmc>;
|
|
fsl,tuning-step = <1>;
|
|
status = "okay";
|
|
};
|
|
|
|
&usdhc3 {
|
|
bus-width = <4>;
|
|
keep-power-in-suspend;
|
|
mmc-pwrseq = <&usdhc3_pwrseq>;
|
|
non-removable;
|
|
pinctrl-0 = <&pinctrl_usdhc3>;
|
|
pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
|
|
pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
|
|
pinctrl-3 = <&pinctrl_usdhc3>;
|
|
pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
|
|
vmmc-supply = <®_usdhc3_vmmc>;
|
|
wakeup-source;
|
|
status = "okay";
|
|
};
|
|
|
|
&wdog3 {
|
|
status = "okay";
|
|
};
|