355 lines
8.0 KiB
Devicetree
355 lines
8.0 KiB
Devicetree
// SPDX-License-Identifier: GPL-2.0-only
|
|
|
|
/dts-v1/;
|
|
|
|
#include "msm8939-pm8916.dtsi"
|
|
#include "msm8916-modem-qdsp6.dtsi"
|
|
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/input/input.h>
|
|
#include <dt-bindings/interrupt-controller/irq.h>
|
|
|
|
/ {
|
|
model = "Asus ZenFone 2 Laser/Selfie (1080p)";
|
|
compatible = "asus,z00t", "qcom,msm8939";
|
|
chassis-type = "handset";
|
|
|
|
aliases {
|
|
mmc0 = &sdhc_1;
|
|
mmc1 = &sdhc_2;
|
|
serial0 = &blsp_uart2;
|
|
};
|
|
|
|
battery: battery {
|
|
compatible = "simple-battery";
|
|
device-chemistry = "lithium-ion-polymer";
|
|
voltage-min-design-microvolt = <3400000>;
|
|
voltage-max-design-microvolt = <4400000>;
|
|
energy-full-design-microwatt-hours = <11500000>;
|
|
charge-full-design-microamp-hours = <3000000>;
|
|
|
|
ocv-capacity-celsius = <(-20) 0 25 40 60>;
|
|
ocv-capacity-table-0 = <4378000 100>, <4220000 95>, <4125000 90>,
|
|
<4071000 85>, <3977000 80>, <3916000 75>, <3866000 70>,
|
|
<3838000 65>, <3822000 60>, <3809000 55>, <3797000 50>,
|
|
<3784000 45>, <3771000 40>, <3757000 35>, <3743000 30>,
|
|
<3726000 25>, <3707000 20>, <3688000 16>, <3670000 13>,
|
|
<3655000 11>, <3648000 10>, <3636000 9>, <3624000 8>,
|
|
<3612000 7>, <3592000 6>, <3569000 5>, <3540000 4>,
|
|
<3494000 3>, <3418000 2>, <3289000 1>, <3000000 0>;
|
|
|
|
ocv-capacity-table-1 = <4378000 100>, <4292000 95>, <4226000 90>,
|
|
<4166000 85>, <4109000 80>, <4064000 75>, <3992000 70>,
|
|
<3942000 65>, <3898000 60>, <3859000 55>, <3826000 50>,
|
|
<3802000 45>, <3788000 40>, <3779000 35>, <3768000 30>,
|
|
<3752000 25>, <3732000 20>, <3712000 16>, <3696000 13>,
|
|
<3688000 11>, <3684000 10>, <3680000 9>, <3675000 8>,
|
|
<3669000 7>, <3658000 6>, <3636000 5>, <3599000 4>,
|
|
<3544000 3>, <3466000 2>, <3341000 1>, <3000000 0>;
|
|
|
|
ocv-capacity-table-2 = <4372000 100>, <4306000 95>, <4247000 90>,
|
|
<4190000 85>, <4134000 80>, <4081000 75>, <4030000 70>,
|
|
<3984000 65>, <3930000 60>, <3884000 55>, <3850000 50>,
|
|
<3826000 45>, <3804000 40>, <3786000 35>, <3770000 30>,
|
|
<3753000 25>, <3734000 20>, <3712000 16>, <3693000 13>,
|
|
<3686000 11>, <3684000 10>, <3682000 9>, <3680000 8>,
|
|
<3676000 7>, <3668000 6>, <3643000 5>, <3600000 4>,
|
|
<3542000 3>, <3462000 2>, <3340000 1>, <3000000 0>;
|
|
|
|
ocv-capacity-table-3 = <4365000 100>, <4304000 95>, <4246000 90>,
|
|
<4189000 85>, <4133000 80>, <4080000 75>, <4030000 70>,
|
|
<3985000 65>, <3933000 60>, <3886000 55>, <3852000 50>,
|
|
<3827000 45>, <3806000 40>, <3789000 35>, <3769000 30>,
|
|
<3746000 25>, <3726000 20>, <3706000 16>, <3688000 13>,
|
|
<3681000 11>, <3678000 10>, <3676000 9>, <3676000 8>,
|
|
<3672000 7>, <3660000 6>, <3634000 5>, <3588000 4>,
|
|
<3528000 3>, <3448000 2>, <3322000 1>, <3000000 0>;
|
|
|
|
ocv-capacity-table-4 = <4358000 100>, <4298000 95>, <4240000 90>,
|
|
<4183000 85>, <4128000 80>, <4076000 75>, <4027000 70>,
|
|
<3983000 65>, <3935000 60>, <3887000 55>, <3852000 50>,
|
|
<3827000 45>, <3806000 40>, <3789000 35>, <3764000 30>,
|
|
<3738000 25>, <3715000 20>, <3695000 16>, <3677000 13>,
|
|
<3672000 11>, <3669000 10>, <3667000 9>, <3666000 8>,
|
|
<3662000 7>, <3652000 6>, <3622000 5>, <3577000 4>,
|
|
<3518000 3>, <3440000 2>, <3321000 1>, <3000000 0>;
|
|
};
|
|
|
|
chosen {
|
|
stdout-path = "serial0";
|
|
};
|
|
|
|
gpio-keys {
|
|
compatible = "gpio-keys";
|
|
|
|
pinctrl-0 = <&gpio_hall_sensor_default>, <&gpio_keys_default>;
|
|
pinctrl-names = "default";
|
|
|
|
button-volume-up {
|
|
label = "Volume Up";
|
|
gpios = <&tlmm 107 GPIO_ACTIVE_LOW>;
|
|
linux,code = <KEY_VOLUMEUP>;
|
|
debounce-interval = <15>;
|
|
};
|
|
|
|
button-volume-down {
|
|
label = "Volume Down";
|
|
gpios = <&tlmm 117 GPIO_ACTIVE_LOW>;
|
|
linux,code = <KEY_VOLUMEDOWN>;
|
|
debounce-interval = <15>;
|
|
};
|
|
|
|
event-hall-sensor {
|
|
label = "Hall Effect Sensor";
|
|
gpios = <&tlmm 108 GPIO_ACTIVE_LOW>;
|
|
linux,input-type = <EV_SW>;
|
|
linux,code = <SW_LID>;
|
|
linux,can-disable;
|
|
debounce-interval = <150>;
|
|
};
|
|
};
|
|
|
|
reg_sd_vmmc: regulator-sdcard-vmmc {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "sdcard-vmmc";
|
|
regulator-min-microvolt = <2950000>;
|
|
regulator-max-microvolt = <2950000>;
|
|
|
|
gpio = <&tlmm 87 GPIO_ACTIVE_HIGH>;
|
|
enable-active-high;
|
|
|
|
startup-delay-us = <200>;
|
|
|
|
pinctrl-0 = <&sd_vmmc_en_default>;
|
|
pinctrl-names = "default";
|
|
};
|
|
|
|
usb_id: usb-id {
|
|
compatible = "linux,extcon-usb-gpio";
|
|
id-gpios = <&tlmm 110 GPIO_ACTIVE_HIGH>;
|
|
pinctrl-0 = <&usb_id_default>;
|
|
pinctrl-names = "default";
|
|
};
|
|
};
|
|
|
|
&blsp_i2c2 {
|
|
status = "okay";
|
|
|
|
magnetometer@c {
|
|
compatible = "asahi-kasei,ak09911";
|
|
reg = <0x0c>;
|
|
|
|
vdd-supply = <&pm8916_l8>;
|
|
vid-supply = <&pm8916_l6>;
|
|
|
|
reset-gpios = <&tlmm 112 GPIO_ACTIVE_LOW>;
|
|
pinctrl-0 = <&mag_reset_default>;
|
|
pinctrl-names = "default";
|
|
};
|
|
|
|
light-sensor@60 {
|
|
compatible = "capella,cm36686", "vishay,vcnl4040";
|
|
reg = <0x60>;
|
|
|
|
interrupts-extended = <&tlmm 113 IRQ_TYPE_EDGE_FALLING>;
|
|
proximity-near-level = <30>;
|
|
|
|
vdd-supply = <&pm8916_l8>;
|
|
vio-supply = <&pm8916_l6>;
|
|
|
|
pinctrl-0 = <&light_int_default>;
|
|
pinctrl-names = "default";
|
|
};
|
|
|
|
imu@68 {
|
|
compatible = "invensense,mpu6515";
|
|
reg = <0x68>;
|
|
|
|
interrupts-extended = <&tlmm 36 IRQ_TYPE_EDGE_RISING>;
|
|
|
|
vdd-supply = <&pm8916_l8>;
|
|
vddio-supply = <&pm8916_l6>;
|
|
|
|
pinctrl-0 = <&imu_default>;
|
|
pinctrl-names = "default";
|
|
|
|
mount-matrix = "0", "1", "0",
|
|
"-1", "0", "0",
|
|
"0", "0", "1";
|
|
};
|
|
};
|
|
|
|
&blsp_i2c5 {
|
|
status = "okay";
|
|
|
|
touchscreen@38 {
|
|
compatible = "edt,edt-ft5306";
|
|
reg = <0x38>;
|
|
|
|
interrupts-extended = <&tlmm 13 IRQ_TYPE_EDGE_FALLING>;
|
|
|
|
reset-gpios = <&tlmm 12 GPIO_ACTIVE_LOW>;
|
|
|
|
vcc-supply = <&pm8916_l8>;
|
|
iovcc-supply = <&pm8916_l6>;
|
|
|
|
touchscreen-size-x = <1080>;
|
|
touchscreen-size-y = <1920>;
|
|
|
|
pinctrl-0 = <&touchscreen_default>;
|
|
pinctrl-names = "default";
|
|
};
|
|
};
|
|
|
|
&blsp_uart2 {
|
|
pinctrl-0 = <&blsp_uart2_console_default>;
|
|
pinctrl-1 = <&blsp_uart2_console_sleep>;
|
|
pinctrl-names = "default", "sleep";
|
|
|
|
status = "okay";
|
|
};
|
|
|
|
&mpss_mem {
|
|
reg = <0x0 0x86800000 0x0 0x5500000>;
|
|
};
|
|
|
|
&pm8916_bms {
|
|
monitored-battery = <&battery>;
|
|
|
|
status = "okay";
|
|
};
|
|
|
|
&pm8916_codec {
|
|
qcom,micbias-lvl = <2800>;
|
|
qcom,mbhc-vthreshold-low = <75 150 237 450 500>;
|
|
qcom,mbhc-vthreshold-high = <75 150 237 450 500>;
|
|
qcom,micbias1-ext-cap;
|
|
qcom,hphl-jack-type-normally-open;
|
|
|
|
status = "okay";
|
|
};
|
|
|
|
&pm8916_vib {
|
|
status = "okay";
|
|
};
|
|
|
|
&sdhc_1 {
|
|
status = "okay";
|
|
};
|
|
|
|
&sdhc_2 {
|
|
vmmc-supply = <®_sd_vmmc>;
|
|
|
|
pinctrl-0 = <&sdc2_default &sdc2_cd_default>;
|
|
pinctrl-1 = <&sdc2_sleep &sdc2_cd_default>;
|
|
pinctrl-names = "default", "sleep";
|
|
cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
|
|
|
|
status = "okay";
|
|
};
|
|
|
|
&sound {
|
|
audio-routing =
|
|
"AMIC1", "MIC BIAS External1",
|
|
"AMIC2", "MIC BIAS Internal2",
|
|
"AMIC3", "MIC BIAS External1";
|
|
|
|
status = "okay";
|
|
};
|
|
|
|
&usb {
|
|
extcon = <&usb_id>, <&usb_id>;
|
|
|
|
status = "okay";
|
|
};
|
|
|
|
&usb_hs_phy {
|
|
extcon = <&usb_id>;
|
|
};
|
|
|
|
&wcnss {
|
|
status = "okay";
|
|
};
|
|
|
|
&wcnss_iris {
|
|
compatible = "qcom,wcn3660b";
|
|
};
|
|
|
|
&wcnss_mem {
|
|
status = "okay";
|
|
};
|
|
|
|
&tlmm {
|
|
touchscreen_default: touchscreen-default-state {
|
|
reset-pins {
|
|
pins = "gpio12";
|
|
function = "gpio";
|
|
drive-strength = <2>;
|
|
bias-disable;
|
|
};
|
|
|
|
touch-pins {
|
|
pins = "gpio13";
|
|
function = "gpio";
|
|
drive-strength = <2>;
|
|
bias-pull-up;
|
|
};
|
|
};
|
|
|
|
imu_default: imu-default-state {
|
|
pins = "gpio36";
|
|
function = "gpio";
|
|
drive-strength = <2>;
|
|
bias-disable;
|
|
};
|
|
|
|
sdc2_cd_default: sdc2-cd-default-state {
|
|
pins = "gpio38";
|
|
function = "gpio";
|
|
drive-strength = <2>;
|
|
bias-disable;
|
|
};
|
|
|
|
sd_vmmc_en_default: sd-vmmc-en-default-state {
|
|
pins = "gpio87";
|
|
function = "gpio";
|
|
drive-strength = <2>;
|
|
bias-disable;
|
|
};
|
|
|
|
gpio_keys_default: gpio-keys-default-state {
|
|
pins = "gpio107", "gpio117";
|
|
function = "gpio";
|
|
drive-strength = <2>;
|
|
bias-pull-up;
|
|
};
|
|
|
|
gpio_hall_sensor_default: gpio-hall-sensor-default-state {
|
|
pins = "gpio108";
|
|
function = "gpio";
|
|
drive-strength = <2>;
|
|
bias-pull-up;
|
|
};
|
|
|
|
usb_id_default: usb-id-default-state {
|
|
pins = "gpio110";
|
|
function = "gpio";
|
|
drive-strength = <8>;
|
|
bias-pull-up;
|
|
};
|
|
|
|
mag_reset_default: mag-reset-default-state {
|
|
pins = "gpio112";
|
|
function = "gpio";
|
|
drive-strength = <2>;
|
|
bias-disable;
|
|
};
|
|
|
|
light_int_default: light-int-default-state {
|
|
pins = "gpio113";
|
|
function = "gpio";
|
|
drive-strength = <16>;
|
|
bias-pull-up;
|
|
};
|
|
};
|