lastdragon/linux-kernel
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
Files
7.2.3
linux-kernel/linux-7.2.3/arch/arm64/boot/dts/qcom/sm7325-motorola-dubai.dts
T
lastdragon ad2088d178 Resguardo inicial
2026-09-06 12:53:21 -06:00

1457 lines
30 KiB
Devicetree
Raw Permalink Blame History

// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
/*
* Copyright (c) 2026, Val Packett <val@packett.cool>
*/
/dts-v1/;
/* PM7250B is configured to use SID8/9 */
#define PM7250B_SID 8
#define PM7250B_SID1 9
#include <dt-bindings/arm/qcom,ids.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/iio/qcom,spmi-adc7-pm7325.h>
#include <dt-bindings/iio/qcom,spmi-adc7-pmk8350.h>
#include <dt-bindings/leds/common.h>
#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
#include "sm7325.dtsi"
#include "pm7325.dtsi"
#include "pm7250b.dtsi"
#include "pm8350c.dtsi" /* PM7350C */
#include "pmk8350.dtsi" /* PMK7325 */
/ {
model = "Motorola Edge 30";
compatible = "motorola,dubai", "qcom,sm7325";
chassis-type = "handset";
aliases {
bluetooth0 = &bluetooth;
serial0 = &uart5;
serial1 = &uart7;
wifi0 = &wifi;
};
chosen {
#address-cells = <2>;
#size-cells = <2>;
ranges;
stdout-path = "serial0:115200n8";
framebuffer {
compatible = "simple-framebuffer";
memory-region = <&framebuffer_mem>;
width = <1080>;
height = <2400>;
stride = <(1080 * 4)>;
format = "a8r8g8b8";
clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
<&dispcc DISP_CC_MDSS_MDP_CLK>,
<&dispcc DISP_CC_MDSS_BYTE0_CLK>,
<&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
<&dispcc DISP_CC_MDSS_PCLK0_CLK>,
<&dispcc DISP_CC_MDSS_VSYNC_CLK>;
power-domains = <&dispcc DISP_CC_MDSS_CORE_GDSC>;
};
};
gpio-keys {
compatible = "gpio-keys";
pinctrl-0 = <&kypd_vol_up_n>;
pinctrl-names = "default";
key-volume-up {
label = "Volume Up";
gpios = <&pm7325_gpios 6 GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEUP>;
};
};
pmic-glink {
compatible = "qcom,sm7325-pmic-glink",
"qcom,qcm6490-pmic-glink",
"qcom,pmic-glink";
#address-cells = <1>;
#size-cells = <0>;
orientation-gpios = <&tlmm 140 GPIO_ACTIVE_HIGH>;
connector@0 {
compatible = "usb-c-connector";
reg = <0>;
power-role = "dual";
data-role = "dual";
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
pmic_glink_hs_in: endpoint {
remote-endpoint = <&usb_1_dwc3_hs>;
};
};
port@2 {
reg = <2>;
pmic_glink_sbu: endpoint {
remote-endpoint = <&fsa4480_sbu_mux>;
};
};
};
};
};
reserved-memory {
#address-cells = <2>;
#size-cells = <2>;
ranges;
ramoops@ae000000 {
compatible = "ramoops";
reg = <0x0 0xae000000 0x0 0xc0000>;
console-size = <0x40000>;
mem-type = <2>;
pmsg-size = <0x40000>;
record-size = <0x3f800>;
};
removed@c0000000 {
reg = <0x0 0xc0000000 0x0 0x5100000>;
no-map;
};
framebuffer_mem: framebuffer@e1000000 {
reg = <0x0 0xe1000000 0x0 (1080 * 2400 * 4)>;
no-map;
};
linux,cma {
compatible = "shared-dma-pool";
size = <0x0 0x8000000>;
reusable;
linux,cma-default;
};
};
thermal-zones {
cam-flash-thermal {
thermal-sensors = <&pmk8350_adc_tm 2>;
trips {
active-config0 {
temperature = <125000>;
hysteresis = <1000>;
type = "passive";
};
};
};
chg-skin-thermal {
thermal-sensors = <&pm7250b_adc_tm 0>;
trips {
active-config0 {
temperature = <125000>;
hysteresis = <1000>;
type = "passive";
};
};
};
chg-thermal {
thermal-sensors = <&pmk8350_adc_tm 4>;
trips {
active-config0 {
temperature = <125000>;
hysteresis = <1000>;
type = "passive";
};
};
};
conn-thermal {
thermal-sensors = <&pm7250b_adc_tm 1>;
trips {
active-config0 {
temperature = <125000>;
hysteresis = <1000>;
type = "passive";
};
};
};
pa-1-thermal {
thermal-sensors = <&pmk8350_adc_tm 5>;
trips {
active-config0 {
temperature = <125000>;
hysteresis = <1000>;
type = "passive";
};
};
};
pa-2-thermal {
thermal-sensors = <&pmk8350_adc_tm 6>;
/* Reports negative temperature. */
status = "disabled";
trips {
active-config0 {
temperature = <125000>;
hysteresis = <1000>;
type = "passive";
};
};
};
quiet-thermal {
thermal-sensors = <&pmk8350_adc_tm 1>;
trips {
active-config0 {
temperature = <125000>;
hysteresis = <1000>;
type = "passive";
};
};
};
sdm-skin-thermal {
thermal-sensors = <&pmk8350_adc_tm 3>;
trips {
active-config0 {
temperature = <125000>;
hysteresis = <1000>;
type = "passive";
};
};
};
xo-thermal {
thermal-sensors = <&pmk8350_adc_tm 0>;
trips {
active-config0 {
temperature = <125000>;
hysteresis = <1000>;
type = "passive";
};
};
};
};
// S2B is really ebi.lvl but it's there for supply map completeness sake.
vreg_s2b_0p7: smpb2-regulator {
compatible = "regulator-fixed";
regulator-name = "vreg_s2b_0p7";
regulator-min-microvolt = <65535>;
regulator-max-microvolt = <65535>;
regulator-always-on;
vin-supply = <&vph_pwr>;
};
vph_pwr: vph-pwr-regulator {
compatible = "regulator-fixed";
regulator-name = "vph_pwr";
regulator-min-microvolt = <3700000>;
regulator-max-microvolt = <3700000>;
};
wcn6750-pmu {
compatible = "qcom,wcn6750-pmu";
pinctrl-0 = <&bt_en>;
pinctrl-names = "default";
vddaon-supply = <&mos_0p95_aon_s10c>;
vddasd-supply = <&vreg_l11c_2p8>;
vddpmu-supply = <&mos_0p95_dig_s10c>;
vddio-supply = <&vdd18_io>;
vddrfa0p8-supply = <&vdd09_pmu_rfa_i>;
vddrfa1p2-supply = <&vdd13_pmu_rfa_i>;
vddrfa1p7-supply = <&vdd19_pmu_rfa_i>;
vddrfa2p2-supply = <&vdd22_wlpa_s1c>;
bt-enable-gpios = <&tlmm 85 GPIO_ACTIVE_HIGH>;
regulators {
vreg_pmu_rfa_cmn: ldo0 {
regulator-name = "vreg_pmu_rfa_cmn";
};
vreg_pmu_aon_0p59: ldo1 {
regulator-name = "vreg_pmu_aon_0p59";
};
vreg_pmu_wlcx_0p8: ldo2 {
regulator-name = "vreg_pmu_wlcx_0p8";
};
vreg_pmu_wlmx_0p85: ldo3 {
regulator-name = "vreg_pmu_wlmx_0p85";
};
vreg_pmu_btcmx_0p85: ldo4 {
regulator-name = "vreg_pmu_btcmx_0p85";
};
vreg_pmu_rfa_0p8: ldo5 {
regulator-name = "vreg_pmu_rfa_0p8";
};
vreg_pmu_rfa_1p2: ldo6 {
regulator-name = "vreg_pmu_rfa_1p2";
};
vreg_pmu_rfa_1p7: ldo7 {
regulator-name = "vreg_pmu_rfa_1p7";
};
vreg_pmu_pcie_0p9: ldo8 {
regulator-name = "vreg_pmu_pcie_0p9";
};
vreg_pmu_pcie_1p8: ldo9 {
regulator-name = "vreg_pmu_pcie_1p8";
};
};
};
};
&apps_rsc {
regulators-0 {
compatible = "qcom,pm7325-rpmh-regulators";
qcom,pmic-id = "b";
vdd-s1-supply = <&vph_pwr>;
vdd-s2-supply = <&vph_pwr>;
vdd-s7-supply = <&vph_pwr>;
vdd-s8-supply = <&vph_pwr>;
vdd-l1-l4-l12-l15-supply = <&vreg_s7b_0p952>;
vdd-l2-l7-supply = <&vreg_bob>;
vdd-l3-supply = <&vreg_s2b_0p7>;
vdd-l5-supply = <&vreg_s2b_0p7>;
vdd-l6-l9-l10-supply = <&vreg_s8b_1p256>;
vdd-l8-supply = <&vreg_s7b_0p952>;
vdd-l11-l17-l18-l19-supply = <&vreg_s1b_1p856>;
vdd-l13-supply = <&vreg_s7b_0p952>;
vdd-l14-l16-supply = <&vreg_s8b_1p256>;
/*
* S2, L4-L5 are ARCs:
* S2 - ebi.lvl,
* L4 - lmx.lvl,
* l5 - lcx.lvl.
*
* L10 are unused.
*/
vdd19_pmu_rfa_i:
vreg_s1b_1p856: smps1 {
regulator-name = "vreg_s1b_1p856";
regulator-min-microvolt = <1840000>;
regulator-max-microvolt = <2040000>;
};
mos_0p95_aon_s10c:
mos_0p95_dig_s10c:
vdd09_pmu_rfa_i:
vreg_s7b_0p952: smps7 {
regulator-name = "vreg_s7b_0p952";
regulator-min-microvolt = <535000>;
regulator-max-microvolt = <1120000>;
};
vdd13_pmu_rfa_i:
vreg_s8b_1p256: smps8 {
regulator-name = "vreg_s8b_1p256";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1500000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_RET>;
};
vreg_l1b_0p912: ldo1 {
regulator-name = "vreg_l1b_0p912";
regulator-min-microvolt = <825000>;
regulator-max-microvolt = <925000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vdd_a_usbhs_3p1:
vreg_l2b_3p072: ldo2 {
regulator-name = "vreg_l2b_3p072";
regulator-min-microvolt = <2700000>;
regulator-max-microvolt = <3544000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l3b_0p6: ldo3 {
regulator-name = "vreg_l3b_0p6";
regulator-min-microvolt = <312000>;
regulator-max-microvolt = <910000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vdd_a_dsi_0_1p2:
vdd_a_ufs_0_1p2:
vreg_l6b_1p2: ldo6 {
regulator-name = "vreg_l6b_1p2";
regulator-min-microvolt = <1140000>;
regulator-max-microvolt = <1260000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
RPMH_REGULATOR_MODE_HPM>;
};
vreg_l7b_2p96: ldo7 {
regulator-name = "vreg_l7b_2p96";
regulator-min-microvolt = <2400000>;
regulator-max-microvolt = <3544000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
RPMH_REGULATOR_MODE_HPM>;
};
vreg_l8b_0p904: ldo8 {
regulator-name = "vreg_l8b_0p904";
regulator-min-microvolt = <870000>;
regulator-max-microvolt = <970000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l9b_1p2: ldo9 {
regulator-name = "vreg_l9b_1p2";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1304000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
RPMH_REGULATOR_MODE_HPM>;
};
vreg_l11b_1p776: ldo11 {
regulator-name = "vreg_l11b_1p776";
regulator-min-microvolt = <1504000>;
regulator-max-microvolt = <2000000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l12b_0p8: ldo12 {
regulator-name = "vreg_l12b_0p8";
regulator-min-microvolt = <751000>;
regulator-max-microvolt = <824000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l13b_0p8: ldo13 {
regulator-name = "vreg_l13b_0p8";
regulator-min-microvolt = <530000>;
regulator-max-microvolt = <824000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l14b_1p2: ldo14 {
regulator-name = "vreg_l14b_1p2";
regulator-min-microvolt = <1080000>;
regulator-max-microvolt = <1304000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l15b_0p88: ldo15 {
regulator-name = "vreg_l15b_0p88";
regulator-min-microvolt = <765000>;
regulator-max-microvolt = <1020000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l16b_1p2: ldo16 {
regulator-name = "vreg_l16b_1p2";
regulator-min-microvolt = <1100000>;
regulator-max-microvolt = <1300000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l17b_1p8: ldo17 {
regulator-name = "vreg_l17b_1p8";
regulator-min-microvolt = <1700000>;
regulator-max-microvolt = <1900000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l18b_1p8: ldo18 {
regulator-name = "vreg_l18b_1p8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <2000000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-always-on;
regulator-boot-on;
};
vdd18_io:
vreg_l19b_1p8: ldo19 {
regulator-name = "vreg_l19b_1p8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <2000000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
};
regulators-1 {
compatible = "qcom,pm8350c-rpmh-regulators";
qcom,pmic-id = "c";
vdd-s1-supply = <&vph_pwr>;
vdd-s2-supply = <&vph_pwr>;
vdd-s5-supply = <&vph_pwr>;
vdd-s7-supply = <&vph_pwr>;
vdd-s9-supply = <&vph_pwr>;
vdd-s10-supply = <&vph_pwr>;
vdd-l1-l12-supply = <&vreg_s1b_1p856>;
vdd-l2-l8-supply = <&vreg_s1b_1p856>;
vdd-l3-l4-l5-l7-l13-supply = <&vreg_bob>;
vdd-l6-l9-l11-supply = <&vreg_bob>;
vdd-l10-supply = <&vreg_s7b_0p952>;
vdd-bob-supply = <&vph_pwr>;
/*
* S2, S5, S7, S10 are ARCs:
* S2 - cx.lvl,
* S5 - mss.lvl,
* S7 - gfx.lvl,
* S10 - mx.lvl.
*/
vdd22_wlpa_s1c:
vreg_s1c_2p2: smps1 {
regulator-name = "vreg_s1c_2p2";
regulator-min-microvolt = <2190000>;
regulator-max-microvolt = <2210000>;
};
vreg_s9c_0p676: smps9 {
regulator-name = "vreg_s9c_0p676";
regulator-min-microvolt = <1010000>;
regulator-max-microvolt = <1170000>;
};
vdd_a_usbhs_1p8:
vdd_qfprom:
vreg_l1c_1p8: ldo1 {
regulator-name = "vreg_l1c_1p8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1980000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
iovdd_ts:
vreg_l2c_1p8: ldo2 {
regulator-name = "vreg_l2c_1p8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vdd_ts:
vreg_l3c_3p0: ldo3 {
regulator-name = "vreg_l3c_3p0";
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3304000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l4c_1p8_3p0: ldo4 {
regulator-name = "vreg_l4c_1p8_3p0";
regulator-min-microvolt = <1620000>;
regulator-max-microvolt = <3300000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l5c_1p8_3p0: ldo5 {
regulator-name = "vreg_l5c_1p8_3p0";
regulator-min-microvolt = <1620000>;
regulator-max-microvolt = <3300000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l6c_2p96: ldo6 {
regulator-name = "vreg_l6c_2p96";
regulator-min-microvolt = <1650000>;
regulator-max-microvolt = <3544000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l7c_3p0: ldo7 {
regulator-name = "vreg_l7c_3p0";
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3544000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l8c_1p8: ldo8 {
regulator-name = "vreg_l8c_1p8";
regulator-min-microvolt = <1620000>;
regulator-max-microvolt = <2000000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l9c_3p3: ldo9 {
regulator-name = "vreg_l9c_2p96";
regulator-min-microvolt = <3008000>;
regulator-max-microvolt = <3300000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vdd_a_dsi_0_0p9:
vdd_a_ufs_0_core:
vdd_a_usbhs_core:
vreg_l10c_0p88: ldo10 {
regulator-name = "vreg_l10c_0p88";
regulator-min-microvolt = <720000>;
regulator-max-microvolt = <1050000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
RPMH_REGULATOR_MODE_HPM>;
};
vreg_l11c_2p8: ldo11 {
regulator-name = "vreg_l11c_2p8";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <3544000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
disp_iovcc_1p8:
vreg_l12c_1p8: ldo12 {
regulator-name = "vreg_l12c_1p8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
disp_vci_3p0:
vreg_l13c_3p0: ldo13 {
regulator-name = "vreg_l13c_3p0";
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
audio_sw_vcc:
vreg_bob: bob {
regulator-name = "vreg_bob";
regulator-min-microvolt = <3008000>;
regulator-max-microvolt = <3960000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
};
};
};
&gcc {
protected-clocks = <GCC_CFG_NOC_LPASS_CLK>,
<GCC_MSS_CFG_AHB_CLK>,
<GCC_MSS_OFFLINE_AXI_CLK>,
<GCC_MSS_Q6SS_BOOT_CLK_SRC>,
<GCC_MSS_Q6_MEMNOC_AXI_CLK>,
<GCC_MSS_SNOC_AXI_CLK>,
<GCC_QSPI_CNOC_PERIPH_AHB_CLK>,
<GCC_QSPI_CORE_CLK>,
<GCC_QSPI_CORE_CLK_SRC>,
<GCC_SEC_CTRL_CLK_SRC>,
<GCC_WPSS_AHB_BDG_MST_CLK>,
<GCC_WPSS_AHB_CLK>,
<GCC_WPSS_RSCP_CLK>;
};
&gpi_dma0 {
status = "okay";
};
&gpi_dma1 {
status = "okay";
};
&gpu {
status = "okay";
};
&gpu_zap_shader {
firmware-name = "qcom/sm7325/motorola/dubai/a660_zap.mbn";
};
&i2c4 {
clock-frequency = <100000>;
status = "okay";
typec-mux@42 {
compatible = "fcs,fsa4480";
reg = <0x42>;
interrupts-extended = <&tlmm 6 IRQ_TYPE_LEVEL_LOW>;
vcc-supply = <&audio_sw_vcc>;
mode-switch;
orientation-switch;
port {
fsa4480_sbu_mux: endpoint {
remote-endpoint = <&pmic_glink_sbu>;
};
};
};
};
&ipa {
firmware-name = "qcom/sm7325/motorola/dubai/yupik_ipa_fws.mbn";
memory-region = <&ipa_fw_mem>;
qcom,gsi-loader = "self";
status = "okay";
};
&pm7250b_adc {
channel@4e {
reg = <ADC5_AMUX_THM2_100K_PU>;
qcom,ratiometric;
qcom,hw-settle-time = <200>;
qcom,pre-scaling = <1 1>;
label = "chg_skin_therm";
};
channel@4f {
reg = <ADC5_AMUX_THM3_100K_PU>;
qcom,ratiometric;
qcom,hw-settle-time = <200>;
qcom,pre-scaling = <1 1>;
label = "conn_therm";
};
};
&pm7250b_adc_tm {
status = "okay";
chg-skin-therm@0 {
reg = <0>;
io-channels = <&pm7250b_adc ADC5_AMUX_THM2_100K_PU>;
qcom,ratiometric;
qcom,hw-settle-time-us = <200>;
};
conn-therm@1 {
reg = <1>;
io-channels = <&pm7250b_adc ADC5_AMUX_THM3_100K_PU>;
qcom,ratiometric;
qcom,hw-settle-time-us = <200>;
};
};
&pm7250b_gpios {
gpio-line-names = "FG_ALERT_N", /* GPIO_1 */
"SLAVECP_INT",
"NC",
"NC",
"NC",
"DOUBLER_STAT",
"NC",
"NC",
"NC",
"NC", /* GPIO_10 */
"NC",
"NC";
};
&pm7325_gpios {
gpio-line-names = "PA_THERM1", /* GPIO_1 */
"NC",
"NC",
"PA_THERM2",
"CBL_PWR_N",
"KYPD_VOL_UP_N",
"NC",
"NC",
"NC",
"NC"; /* GPIO_10 */
kypd_vol_up_n: kypd-volp-n-state {
pins = "gpio6";
function = PMIC_GPIO_FUNC_NORMAL;
bias-pull-up;
input-enable;
power-source = <1>;
};
};
&pm8350c_gpios {
gpio-line-names = "NC", /* GPIO_1 */
"NC",
"NC",
"NC",
"NC",
"NC",
"NC",
"NC",
"NC"; /* GPIO_9 */
};
&pm8350c_flash {
status = "okay";
led-0 {
function = LED_FUNCTION_FLASH;
color = <LED_COLOR_ID_WHITE>;
led-sources = <1>, <4>;
led-max-microamp = <500000>;
flash-max-microamp = <1500000>;
flash-max-timeout-us = <400000>;
};
led-1 {
function = LED_FUNCTION_FLASH;
color = <LED_COLOR_ID_WHITE>;
led-sources = <2>, <3>;
led-max-microamp = <500000>;
flash-max-microamp = <1500000>;
flash-max-timeout-us = <400000>;
};
};
&pmk8350_adc_tm {
status = "okay";
xo-therm@0 {
reg = <0>;
io-channels = <&pmk8350_vadc PMK8350_ADC7_AMUX_THM1_100K_PU>;
qcom,ratiometric;
qcom,hw-settle-time-us = <200>;
};
quiet-therm@1 {
reg = <1>;
io-channels = <&pmk8350_vadc PM7325_ADC7_AMUX_THM1_100K_PU>;
qcom,ratiometric;
qcom,hw-settle-time-us = <200>;
};
cam-flash-therm@2 {
reg = <2>;
io-channels = <&pmk8350_vadc PM7325_ADC7_AMUX_THM2_100K_PU>;
qcom,ratiometric;
qcom,hw-settle-time-us = <200>;
};
sdm-skin-therm@3 {
reg = <3>;
io-channels = <&pmk8350_vadc PM7325_ADC7_AMUX_THM3_100K_PU>;
qcom,ratiometric;
qcom,hw-settle-time-us = <200>;
};
chg-therm@4 {
reg = <4>;
io-channels = <&pmk8350_vadc PM7325_ADC7_AMUX_THM4_100K_PU>;
qcom,ratiometric;
qcom,hw-settle-time-us = <200>;
};
pa-therm-1@5 {
reg = <5>;
io-channels = <&pmk8350_vadc PM7325_ADC7_GPIO1_100K_PU>;
qcom,ratiometric;
qcom,hw-settle-time-us = <200>;
};
pa-therm-2@6 {
reg = <6>;
io-channels = <&pmk8350_vadc PM7325_ADC7_GPIO4_100K_PU>;
qcom,ratiometric;
qcom,hw-settle-time-us = <200>;
};
};
&pmk8350_gpios {
gpio-line-names = "NC", /* GPIO_0 */
"NC",
"TP_PMK_GPIO_3",
"PMK_OPTION"; /* GPIO_4 */
};
&pmk8350_rtc {
status = "okay";
};
&pmk8350_vadc {
status = "okay";
channel@44 {
reg = <PMK8350_ADC7_AMUX_THM1_100K_PU>;
qcom,ratiometric;
qcom,hw-settle-time = <200>;
qcom,pre-scaling = <1 1>;
label = "pmk8350_xo_therm";
};
channel@144 {
reg = <PM7325_ADC7_AMUX_THM1_100K_PU>;
qcom,ratiometric;
qcom,hw-settle-time = <200>;
qcom,pre-scaling = <1 1>;
label = "pm7325_quiet_therm";
};
channel@145 {
reg = <PM7325_ADC7_AMUX_THM2_100K_PU>;
qcom,ratiometric;
qcom,hw-settle-time = <200>;
qcom,pre-scaling = <1 1>;
label = "pm7325_cam_flash_therm";
};
channel@146 {
reg = <PM7325_ADC7_AMUX_THM3_100K_PU>;
qcom,ratiometric;
qcom,hw-settle-time = <200>;
qcom,pre-scaling = <1 1>;
label = "pm7325_sdm_skin_therm";
};
channel@147 {
reg = <PM7325_ADC7_AMUX_THM4_100K_PU>;
qcom,ratiometric;
qcom,hw-settle-time = <200>;
qcom,pre-scaling = <1 1>;
label = "pm7325_chg_therm";
};
channel@14a {
reg = <PM7325_ADC7_GPIO1_100K_PU>;
qcom,ratiometric;
qcom,hw-settle-time = <200>;
qcom,pre-scaling = <1 1>;
label = "pm7325_pa_therm1";
};
channel@14d {
reg = <PM7325_ADC7_GPIO4_100K_PU>;
qcom,ratiometric;
qcom,hw-settle-time = <200>;
qcom,pre-scaling = <1 1>;
label = "pm7325_pa_therm2";
};
};
&pon_pwrkey {
status = "okay";
};
&pon_resin {
linux,code = <KEY_VOLUMEDOWN>;
status = "okay";
};
&qfprom {
vcc-supply = <&vdd_qfprom>;
};
&qup_spi13_cs {
drive-strength = <6>;
bias-pull-down;
};
&qup_spi13_data_clk {
drive-strength = <6>;
bias-pull-down;
};
&qup_uart5_rx {
drive-strength = <2>;
bias-disable;
};
&qup_uart5_tx {
drive-strength = <2>;
bias-disable;
};
&qup_uart7_cts {
/*
* Configure a bias-bus-hold on CTS to lower power
* usage when Bluetooth is turned off. Bus hold will
* maintain a low power state regardless of whether
* the Bluetooth module drives the pin in either
* direction or leaves the pin fully unpowered.
*/
bias-bus-hold;
};
&qup_uart7_rts {
/* We'll drive RTS, so no pull */
drive-strength = <2>;
bias-disable;
};
&qup_uart7_rx {
/*
* Configure a pull-up on RX. This is needed to avoid
* garbage data when the TX pin of the Bluetooth module is
* in tri-state (module powered off or not driving the
* signal yet).
*/
bias-pull-up;
};
&qup_uart7_tx {
/* We'll drive TX, so no pull */
drive-strength = <2>;
bias-disable;
};
&qupv3_id_0 {
status = "okay";
};
&qupv3_id_1 {
status = "okay";
};
&remoteproc_adsp {
firmware-name = "qcom/sm7325/motorola/dubai/adsp.mbn";
status = "okay";
};
&remoteproc_cdsp {
firmware-name = "qcom/sm7325/motorola/dubai/cdsp.mbn";
status = "okay";
};
&remoteproc_mpss {
firmware-name = "qcom/sm7325/motorola/dubai/modem.mbn";
status = "okay";
};
&remoteproc_wpss {
firmware-name = "qcom/sm7325/motorola/dubai/wpss.mbn";
status = "okay";
};
&rmtfs_mem {
qcom,vmid = <QCOM_SCM_VMID_MSS_MSA>,
<QCOM_SCM_VMID_NAV>;
};
&spi13 {
status = "okay";
touchscreen@0 {
compatible = "goodix,gt9916";
reg = <0>;
interrupts-extended = <&tlmm 81 IRQ_TYPE_LEVEL_LOW>;
reset-gpios = <&tlmm 105 GPIO_ACTIVE_LOW>;
avdd-supply = <&vdd_ts>;
vddio-supply = <&iovdd_ts>;
spi-max-frequency = <1000000>;
touchscreen-size-x = <1080>;
touchscreen-size-y = <2400>;
pinctrl-0 = <&ts_int_n>, <&ts_reset_n>;
pinctrl-names = "default";
};
};
&tlmm {
gpio-line-names = "NC", /* GPIO_0 */
"NC",
"NC",
"NC",
"SMARTPA_I2C_SDA",
"SMARTPA_I2C_SCK",
"AUD_4480_DET",
"AUD_4480_INT",
"FASTCHARGE_I2C_SDA",
"FASTCHARGE_I2C_SCL",
"SM_GPSLNA_EN_GPIO10", /* GPIO_10 */
"NC",
"PERI_I2C_SDA",
"PERI_I2C_SCL",
"NC",
"NC",
"APPS_I2C_SDA",
"APPS_I2C_SCL",
"NC",
"DISP_LDO_EN",
"CAM_FW_RST_N", /* GPIO_20 */
"CAM_RM_RST_N",
"DBG_UART_TXD",
"DBG_UART_RXD",
"TOPSB_INT_N",
"MCAM_LDO_EN",
"HOST2WLAN_SOL",
"WLAN2HOST_SOL",
"UART_BT_RTS_AP_CTS",
"UART_BT_CTS_AP_RTS",
"UART_BT_RX_AP_TX", /* GPIO_30 */
"UART_BT_TX_AP_RX",
"FRONT_60M_INT",
"FRONT_60M_RST",
"FP_INT",
"FP_RST",
"NFC_I2C_SDA",
"NFC_I2C_SCL",
"NFC_EN",
"NFC_CLK_REQ",
"NFC_SE_SPI_NREST", /* GPIO_40 */
"NFC_IRQ",
"RF_LDO_GPIO42_EN",
"GOOGLE_KEY_INT", /* no such key exists */
"DISP_RST_N",
"SB_INT_N",
"HAP_RST_N",
"HAP_INT",
"ESE_SPI_MISO",
"ESE_SPI_MOSI",
"ESE_SPI_CLK", /* GPIO_50 */
"ESE_SPI_CS",
"TP_SPI_MISO",
"TP_SPI_MOSI",
"TP_SPI_CLK",
"TP_SPI_CS_N",
"FP_SPI_MISO",
"FP_SPI_MOSI",
"FP_SPI_CLK",
"FP_SPI_CS_N",
"HW_ID_1", /* GPIO_60 */
"HW_ID_2",
"CAM_PMU_EN",
"WIDE_DVDD_LDO_EN",
"CAM_MCLK0",
"CAM_MCLK1",
"CAM_MCLK2",
"CAM_MCLK3",
"NC",
"CCI_I2C_SDA0",
"CCI_I2C_SCL0", /* GPIO_70 */
"CCI_I2C_SDA1",
"CCI_I2C_SCL1",
"CCI_I2C_SDA2",
"CCI_I2C_SCL2",
"CCI_I2C_SDA3",
"CCI_I2C_SCL3",
"CAM_RT_RST_N",
"CAM_RU_RST_N",
"FCAM_LDO_EN",
"DISP_TE", /* GPIO_80 */
"TP_INT_N",
"FORCED_USB_BOOT",
"SM_CDC_RST_N",
"WLAN_EN",
"BT_EN",
"WCN_SW_CTRL",
"PCIE0_RESET_N",
"PCIE0_CLK_REQ_N",
"PCIE0_WAKE_N",
"MOS_AS_EN", /* GPIO_90 */
"NC",
"",
"NC",
"BT_FM_SLIMBUS_CLK",
"BT_FM_SLIMBUS_DATA",
"NC",
"RFCONN_DET_1",
"RF_CON_DET_2",
"RF_CON_DET_3",
"NC", /* GPIO_100 */
"NC",
"NC",
"ACCEL_INT",
"NC",
"TP_RST_N",
"NC",
"NC",
"NC",
"UIM2_DATA",
"UIM2_CLK", /* GPIO_110 */
"UIM2_RESET",
"UIM2_PRESENT",
"UIM1_DATA",
"UIM1_CLK",
"UIM1_RESET",
"UIM1_PRESENT",
"SM_RFFE0_CLK",
"SM_RFFE0_DATA",
"SM_RFFE1_CLK",
"SM_RFFE1_DATA", /* GPIO_120 */
"PA_MUTING",
"SM_GRFC5",
"LAA_RX",
"SM_GRFC7",
"SM_RFFE4_CLK",
"SM_RFFE4_DATA",
"WLAN_COEX_UART_RX",
"WLAN_COEX_UART_TX",
"NC",
"NC", /* GPIO_130 */
"SM_GRFC12",
"NC",
"QLINK0_REQUEST",
"QLINK0_ENABLE",
"QLINK0_WMSS_RESET_N",
"NC",
"NC",
"NC",
"NC",
"USB_CC_DIR", /* GPIO_140 */
"SAR_INT_N",
"PROX_INT_N",
"",
"SM_SWR_TX_CLK",
"SM_SWR_TX_DATA0",
"SM_SWR_TX_DATA1",
"SM_SWR_RX_CLK",
"SM_SWR_RX_DATA0",
"SM_SWR_RX_DATA1",
"NC", /* GPIO_150 */
"NC",
"NC",
"NC",
"SB_MI2S_SCK",
"SB_MI2S_WS",
"SB_MI2S_RXDAT_AP_TX",
"SB_MI2S_TXDAT_AP_RX",
"NC",
"SNS_I3C0_SDA",
"SNS_I3C0_SCL", /* GPIO_160 */
"SSC_I2C4_SDA",
"SSC_I2C4_SCL",
"MAG_I2C_SDA",
"MAG_I2C_SCL",
"NC",
"NC",
"",
"",
"",
"", /* GPIO_170 */
"SSC_BT_UART4_TX",
"SSC_BT_UART4_RX",
"NC",
"NC";
gpio-reserved-ranges = <48 4>, /* SPI (eSE - embedded Secure Element) */
<56 4>; /* SPI (fingerprint reader) */
qup_uart7_sleep_cts: qup-uart7-sleep-cts-state {
pins = "gpio28";
function = "gpio";
/*
* Configure a bias-bus-hold on CTS to lower power
* usage when Bluetooth is turned off. Bus hold will
* maintain a low power state regardless of whether
* the Bluetooth module drives the pin in either
* direction or leaves the pin fully unpowered.
*/
bias-bus-hold;
};
qup_uart7_sleep_rts: qup-uart7-sleep-rts-state {
pins = "gpio29";
function = "gpio";
/*
* Configure pull-down on RTS. As RTS is active low
* signal, pull it low to indicate the BT SoC that it
* can wakeup the system anytime from suspend state by
* pulling RX low (by sending wakeup bytes).
*/
bias-pull-down;
};
qup_uart7_sleep_tx: qup-uart7-sleep-tx-state {
pins = "gpio30";
function = "gpio";
/*
* Configure pull-up on TX when it isn't actively driven
* to prevent BT SoC from receiving garbage during sleep.
*/
bias-pull-up;
};
qup_uart7_sleep_rx: qup-uart7-sleep-rx-state {
pins = "gpio31";
function = "gpio";
/*
* Configure a pull-up on RX. This is needed to avoid
* garbage data when the TX pin of the Bluetooth module
* is floating which may cause spurious wakeups.
*/
bias-pull-up;
};
oled_reset_n: oled-reset-n-state {
pins = "gpio44";
function = "gpio";
drive-strength = <8>;
bias-disable;
};
aw86224_reset_default: aw86224-reset-default-state {
pins = "gpio46";
function = "gpio";
drive-strength = <2>;
bias-pull-down;
};
aw86224_int_default: aw86224-int-default-state {
pins = "gpio47";
function = "gpio";
drive-strength = <2>;
bias-pull-up;
};
mdp_vsync_p: mdp-vsync-p-state {
pins = "gpio80";
function = "mdp_vsync";
drive-strength = <2>;
bias-pull-down;
};
ts_int_n: ts-int-n-state {
pins = "gpio81";
function = "gpio";
drive-strength = <8>;
bias-pull-up;
};
bt_en: bt-en-state {
pins = "gpio85";
function = "gpio";
output-low;
bias-disable;
};
ts_reset_n: ts-int-n-state {
pins = "gpio105";
function = "gpio";
drive-strength = <8>;
bias-pull-up;
};
};
&uart5 {
status = "okay";
};
&uart7 {
/delete-property/ interrupts;
interrupts-extended = <&intc GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>,
<&tlmm 31 IRQ_TYPE_EDGE_FALLING>;
pinctrl-1 = <&qup_uart7_sleep_cts>,
<&qup_uart7_sleep_rts>,
<&qup_uart7_sleep_tx>,
<&qup_uart7_sleep_rx>;
pinctrl-names = "default",
"sleep";
status = "okay";
bluetooth: bluetooth {
compatible = "qcom,wcn6750-bt";
vddrfacmn-supply = <&vreg_pmu_rfa_cmn>;
vddaon-supply = <&vreg_pmu_aon_0p59>;
vddbtcmx-supply = <&vreg_pmu_btcmx_0p85>;
vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
vddrfa1p7-supply = <&vreg_pmu_rfa_1p7>;
vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
max-speed = <3200000>;
qcom,local-bd-address-broken;
};
};
&ufs_mem_hc {
reset-gpios = <&tlmm 175 GPIO_ACTIVE_LOW>;
vcc-supply = <&vreg_l7b_2p96>;
vcc-max-microamp = <800000>;
vccq-supply = <&vreg_l9b_1p2>;
vccq-max-microamp = <900000>;
status = "okay";
};
&ufs_mem_phy {
vdda-phy-supply = <&vdd_a_ufs_0_core>;
vdda-pll-supply = <&vdd_a_ufs_0_1p2>;
status = "okay";
};
&usb_1 {
/* USB 2.0 only */
qcom,select-utmi-as-pipe-clk;
maximum-speed = "high-speed";
/* Remove USB3 phy */
phys = <&usb_1_hsphy>;
phy-names = "usb2-phy";
status = "okay";
};
&usb_1_dwc3_hs {
remote-endpoint = <&pmic_glink_hs_in>;
};
&usb_1_hsphy {
vdda-pll-supply = <&vdd_a_usbhs_core>;
vdda18-supply = <&vdd_a_usbhs_1p8>;
vdda33-supply = <&vdd_a_usbhs_3p1>;
status = "okay";
};
&venus {
firmware-name = "qcom/sm7325/motorola/dubai/vpu20_1v.mbn";
status = "okay";
};
&wifi {
qcom,calibration-variant = "Motorola_dubai";
status = "okay";
};
Reference in New Issue View Git Blame Copy Permalink