1351 lines
33 KiB
Devicetree
1351 lines
33 KiB
Devicetree
// SPDX-License-Identifier: BSD-3-Clause
|
|
/*
|
|
* Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries.
|
|
*/
|
|
|
|
/dts-v1/;
|
|
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/input/linux-event-codes.h>
|
|
#include <dt-bindings/leds/common.h>
|
|
#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
|
|
#include "kaanapali.dtsi"
|
|
|
|
#include "pm8010-kaanapali.dtsi" /* SPMI1: SID-12/13 */
|
|
#include "pmd8028-kaanapali.dtsi" /* SPMI1: SID-4 */
|
|
#include "pmh0101.dtsi" /* SPMI0: SID-1 */
|
|
#include "pmh0104-kaanapali.dtsi" /* SPMI1: SID-9 */
|
|
#include "pmh0110-kaanapali.dtsi" /* SPMI0: SID-3/5/6/8 */
|
|
#include "pmih0108-kaanapali.dtsi" /* SPMI1: SID-7 */
|
|
#include "pmk8850.dtsi" /* SPMI0: SID-0 */
|
|
#include "pmr735d-kaanapali.dtsi" /* SPMI1: SID-10 */
|
|
|
|
/ {
|
|
model = "Qualcomm Technologies, Inc. Kaanapali MTP";
|
|
compatible = "qcom,kaanapali-mtp", "qcom,kaanapali";
|
|
chassis-type = "handset";
|
|
|
|
aliases {
|
|
serial0 = &uart7;
|
|
serial1 = &uart18;
|
|
};
|
|
|
|
chosen {
|
|
stdout-path = "serial0:115200n8";
|
|
};
|
|
|
|
clocks {
|
|
xo_board: xo-board {
|
|
compatible = "fixed-clock";
|
|
clock-frequency = <76800000>;
|
|
#clock-cells = <0>;
|
|
};
|
|
|
|
sleep_clk: sleep-clk {
|
|
compatible = "fixed-clock";
|
|
clock-frequency = <32764>;
|
|
#clock-cells = <0>;
|
|
};
|
|
|
|
bi_tcxo_div2: bi-tcxo-div2-clk {
|
|
compatible = "fixed-factor-clock";
|
|
#clock-cells = <0>;
|
|
|
|
clocks = <&rpmhcc RPMH_CXO_CLK>;
|
|
clock-mult = <1>;
|
|
clock-div = <2>;
|
|
};
|
|
|
|
bi_tcxo_ao_div2: bi-tcxo-ao-div2-clk {
|
|
compatible = "fixed-factor-clock";
|
|
#clock-cells = <0>;
|
|
|
|
clocks = <&rpmhcc RPMH_CXO_CLK_A>;
|
|
clock-mult = <1>;
|
|
clock-div = <2>;
|
|
};
|
|
};
|
|
|
|
gpio-keys {
|
|
compatible = "gpio-keys";
|
|
|
|
pinctrl-0 = <&key_vol_up_default>;
|
|
pinctrl-names = "default";
|
|
|
|
key-volume-up {
|
|
label = "Volume Up";
|
|
linux,code = <KEY_VOLUMEUP>;
|
|
gpios = <&tlmm 101 GPIO_ACTIVE_LOW>;
|
|
debounce-interval = <15>;
|
|
linux,can-disable;
|
|
wakeup-source;
|
|
};
|
|
};
|
|
|
|
sound {
|
|
compatible = "qcom,kaanapali-sndcard", "qcom,sm8450-sndcard";
|
|
model = "Kaanapali-MTP";
|
|
|
|
audio-routing = "SpkrLeft IN", "WSA_SPK1 OUT",
|
|
"SpkrRight IN", "WSA_SPK2 OUT",
|
|
"IN1_HPHL", "HPHL_OUT",
|
|
"IN2_HPHR", "HPHR_OUT",
|
|
"AMIC2", "MIC BIAS2",
|
|
"VA DMIC0", "MIC BIAS1",
|
|
"VA DMIC1", "MIC BIAS1",
|
|
"VA DMIC2", "MIC BIAS3",
|
|
"VA DMIC3", "MIC BIAS3",
|
|
"TX SWR_INPUT1", "ADC2_OUTPUT";
|
|
|
|
va-dai-link {
|
|
link-name = "VA Capture";
|
|
|
|
codec {
|
|
sound-dai = <&lpass_vamacro 0>;
|
|
};
|
|
|
|
cpu {
|
|
sound-dai = <&q6apmbedai VA_CODEC_DMA_TX_0>;
|
|
};
|
|
|
|
platform {
|
|
sound-dai = <&q6apm>;
|
|
};
|
|
};
|
|
|
|
wcd-capture-dai-link {
|
|
link-name = "WCD Capture";
|
|
|
|
codec {
|
|
sound-dai = <&wcd939x 1>, <&swr2 0>, <&lpass_txmacro 0>;
|
|
};
|
|
|
|
cpu {
|
|
sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>;
|
|
};
|
|
|
|
platform {
|
|
sound-dai = <&q6apm>;
|
|
};
|
|
};
|
|
|
|
wcd-playback-dai-link {
|
|
link-name = "WCD Playback";
|
|
|
|
codec {
|
|
sound-dai = <&wcd939x 0>, <&swr1 0>, <&lpass_rxmacro 0>;
|
|
};
|
|
|
|
cpu {
|
|
sound-dai = <&q6apmbedai RX_CODEC_DMA_RX_0>;
|
|
};
|
|
|
|
platform {
|
|
sound-dai = <&q6apm>;
|
|
};
|
|
};
|
|
|
|
wsa-dai-link {
|
|
link-name = "WSA Playback";
|
|
|
|
codec {
|
|
sound-dai = <&north_spkr>, <&south_spkr>, <&swr0 0>,
|
|
<&lpass_wsamacro 0>;
|
|
};
|
|
|
|
cpu {
|
|
sound-dai = <&q6apmbedai WSA_CODEC_DMA_RX_0>;
|
|
};
|
|
|
|
platform {
|
|
sound-dai = <&q6apm>;
|
|
};
|
|
};
|
|
};
|
|
|
|
wcd939x: audio-codec {
|
|
compatible = "qcom,wcd9395-codec", "qcom,wcd9390-codec";
|
|
|
|
pinctrl-0 = <&wcd_default>;
|
|
pinctrl-names = "default";
|
|
|
|
qcom,micbias1-microvolt = <1800000>;
|
|
qcom,micbias2-microvolt = <1800000>;
|
|
qcom,micbias3-microvolt = <1800000>;
|
|
qcom,micbias4-microvolt = <1800000>;
|
|
qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000
|
|
500000 500000 500000 500000>;
|
|
qcom,mbhc-headset-vthreshold-microvolt = <1700000>;
|
|
qcom,mbhc-headphone-vthreshold-microvolt = <50000>;
|
|
qcom,rx-device = <&wcd_rx>;
|
|
qcom,tx-device = <&wcd_tx>;
|
|
|
|
reset-gpios = <&tlmm 161 GPIO_ACTIVE_LOW>;
|
|
|
|
vdd-buck-supply = <&vreg_l15b_1p8>;
|
|
vdd-rxtx-supply = <&vreg_l15b_1p8>;
|
|
vdd-io-supply = <&vreg_l15b_1p8>;
|
|
vdd-mic-bias-supply = <&vreg_bob1>;
|
|
vdd-px-supply = <&vreg_l1g_1p2>;
|
|
|
|
#sound-dai-cells = <1>;
|
|
};
|
|
|
|
wcn7850-pmu {
|
|
compatible = "qcom,wcn7850-pmu";
|
|
|
|
pinctrl-0 = <&bt_default>, <&sw_ctrl_default>, <&wlan_en>;
|
|
pinctrl-names = "default";
|
|
|
|
bt-enable-gpios = <&pmh0104_j_e1_gpios 5 GPIO_ACTIVE_HIGH>;
|
|
wlan-enable-gpios = <&tlmm 16 GPIO_ACTIVE_HIGH>;
|
|
|
|
vdd-supply = <&vreg_s2j_0p8>;
|
|
vddio-supply = <&vreg_l2g_1p8>;
|
|
vddio1p2-supply = <&vreg_l3g_1p2>;
|
|
vddaon-supply = <&vreg_s7g_0p9>;
|
|
vdddig-supply = <&vreg_s1j_0p8>;
|
|
vddrfa1p2-supply = <&vreg_s7f_1p2>;
|
|
vddrfa1p8-supply = <&vreg_s8f_1p8>;
|
|
|
|
clocks = <&rpmhcc RPMH_RF_CLK1>;
|
|
|
|
regulators {
|
|
vreg_pmu_rfa_cmn: ldo0 {
|
|
regulator-name = "vreg_pmu_rfa_cmn";
|
|
};
|
|
|
|
vreg_pmu_aon_0p59: ldo1 {
|
|
regulator-name = "vreg_pmu_aon_0p59";
|
|
};
|
|
|
|
vreg_pmu_wlcx_0p8: ldo2 {
|
|
regulator-name = "vreg_pmu_wlcx_0p8";
|
|
};
|
|
|
|
vreg_pmu_wlmx_0p85: ldo3 {
|
|
regulator-name = "vreg_pmu_wlmx_0p85";
|
|
};
|
|
|
|
vreg_pmu_btcmx_0p85: ldo4 {
|
|
regulator-name = "vreg_pmu_btcmx_0p85";
|
|
};
|
|
|
|
vreg_pmu_rfa_0p8: ldo5 {
|
|
regulator-name = "vreg_pmu_rfa_0p8";
|
|
};
|
|
|
|
vreg_pmu_rfa_1p2: ldo6 {
|
|
regulator-name = "vreg_pmu_rfa_1p2";
|
|
};
|
|
|
|
vreg_pmu_rfa_1p8: ldo7 {
|
|
regulator-name = "vreg_pmu_rfa_1p8";
|
|
};
|
|
|
|
vreg_pmu_pcie_0p9: ldo8 {
|
|
regulator-name = "vreg_pmu_pcie_0p9";
|
|
};
|
|
|
|
vreg_pmu_pcie_1p8: ldo9 {
|
|
regulator-name = "vreg_pmu_pcie_1p8";
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&apps_rsc {
|
|
regulators-0 {
|
|
compatible = "qcom,pmh0101-rpmh-regulators";
|
|
qcom,pmic-id = "B_E0";
|
|
|
|
vreg_bob1: bob1 {
|
|
regulator-name = "vreg_bob1";
|
|
regulator-min-microvolt = <3008000>;
|
|
regulator-max-microvolt = <4000000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
|
|
vreg_bob2: bob2 {
|
|
regulator-name = "vreg_bob2";
|
|
regulator-min-microvolt = <2704000>;
|
|
regulator-max-microvolt = <3552000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
|
|
vreg_l1b_1p8: ldo1 {
|
|
regulator-name = "vreg_l1b_1p8";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
|
|
regulator-allow-set-load;
|
|
regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
|
|
RPMH_REGULATOR_MODE_AUTO>;
|
|
};
|
|
|
|
vreg_l2b_3p0: ldo2 {
|
|
regulator-name = "vreg_l2b_3p0";
|
|
regulator-min-microvolt = <3008000>;
|
|
regulator-max-microvolt = <3048000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
|
|
regulator-allow-set-load;
|
|
regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
|
|
RPMH_REGULATOR_MODE_AUTO>;
|
|
};
|
|
|
|
vreg_l4b_1p8: ldo4 {
|
|
regulator-name = "vreg_l4b_1p8";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
|
|
regulator-allow-set-load;
|
|
regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
|
|
RPMH_REGULATOR_MODE_AUTO>;
|
|
};
|
|
|
|
vreg_l5b_3p1: ldo5 {
|
|
regulator-name = "vreg_l5b_3p1";
|
|
regulator-min-microvolt = <3100000>;
|
|
regulator-max-microvolt = <3148000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
|
|
regulator-allow-set-load;
|
|
regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
|
|
RPMH_REGULATOR_MODE_AUTO>;
|
|
};
|
|
|
|
vreg_l6b_1p8: ldo6 {
|
|
regulator-name = "vreg_l6b_1p8";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <3008000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
|
|
regulator-allow-set-load;
|
|
regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
|
|
RPMH_REGULATOR_MODE_AUTO>;
|
|
};
|
|
|
|
vreg_l7b_1p8: ldo7 {
|
|
regulator-name = "vreg_l7b_1p8";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <3008000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
|
|
regulator-allow-set-load;
|
|
regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
|
|
RPMH_REGULATOR_MODE_AUTO>;
|
|
};
|
|
|
|
vreg_l8b_1p8: ldo8 {
|
|
regulator-name = "vreg_l8b_1p8";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <3008000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
|
|
regulator-allow-set-load;
|
|
regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
|
|
RPMH_REGULATOR_MODE_AUTO>;
|
|
};
|
|
|
|
vreg_l9b_2p9: ldo9 {
|
|
regulator-name = "vreg_l9b_2p9";
|
|
regulator-min-microvolt = <2960000>;
|
|
regulator-max-microvolt = <3008000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
regulator-allow-set-load;
|
|
regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
|
|
RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
|
|
vreg_l10b_1p8: ldo10 {
|
|
regulator-name = "vreg_l10b_1p8";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
|
|
regulator-allow-set-load;
|
|
regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
|
|
RPMH_REGULATOR_MODE_AUTO>;
|
|
};
|
|
|
|
vreg_l11b_1p0: ldo11 {
|
|
regulator-name = "vreg_l11b_1p0";
|
|
regulator-min-microvolt = <1000000>;
|
|
regulator-max-microvolt = <1292000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
|
|
regulator-allow-set-load;
|
|
regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
|
|
RPMH_REGULATOR_MODE_AUTO>;
|
|
};
|
|
|
|
vreg_l12b_1p8: ldo12 {
|
|
regulator-name = "vreg_l12b_1p8";
|
|
regulator-min-microvolt = <1650000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
|
|
regulator-allow-set-load;
|
|
regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
|
|
RPMH_REGULATOR_MODE_AUTO>;
|
|
};
|
|
|
|
vreg_l13b_3p0: ldo13 {
|
|
regulator-name = "vreg_l13b_3p0";
|
|
regulator-min-microvolt = <3000000>;
|
|
regulator-max-microvolt = <3000000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
|
|
regulator-allow-set-load;
|
|
regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
|
|
RPMH_REGULATOR_MODE_AUTO>;
|
|
};
|
|
|
|
vreg_l14b_3p2: ldo14 {
|
|
regulator-name = "vreg_l14b_3p2";
|
|
regulator-min-microvolt = <3200000>;
|
|
regulator-max-microvolt = <3200000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
|
|
regulator-allow-set-load;
|
|
regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
|
|
RPMH_REGULATOR_MODE_AUTO>;
|
|
};
|
|
|
|
vreg_l15b_1p8: ldo15 {
|
|
regulator-name = "vreg_l15b_1p8";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
|
|
regulator-allow-set-load;
|
|
regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
|
|
RPMH_REGULATOR_MODE_AUTO>;
|
|
};
|
|
|
|
vreg_l17b_2p5: ldo17 {
|
|
regulator-name = "vreg_l17b_2p5";
|
|
regulator-min-microvolt = <2504000>;
|
|
regulator-max-microvolt = <2504000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
regulator-allow-set-load;
|
|
regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
|
|
RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
|
|
vreg_l18b_1p2: ldo18 {
|
|
regulator-name = "vreg_l18b_1p2";
|
|
regulator-min-microvolt = <1200000>;
|
|
regulator-max-microvolt = <1200000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
|
|
regulator-allow-set-load;
|
|
regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
|
|
RPMH_REGULATOR_MODE_AUTO>;
|
|
};
|
|
};
|
|
|
|
regulators-1 {
|
|
compatible = "qcom,pmh0110-rpmh-regulators";
|
|
qcom,pmic-id = "D_E0";
|
|
|
|
vreg_s10d_1p0: smps10 {
|
|
regulator-name = "vreg_s10d_1p0";
|
|
regulator-min-microvolt = <1000000>;
|
|
regulator-max-microvolt = <1100000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
|
|
vreg_l1d_1p2: ldo1 {
|
|
regulator-name = "vreg_l1d_1p2";
|
|
regulator-min-microvolt = <1200000>;
|
|
regulator-max-microvolt = <1256000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
|
|
regulator-allow-set-load;
|
|
regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
|
|
RPMH_REGULATOR_MODE_AUTO>;
|
|
};
|
|
|
|
vreg_l2d_0p9: ldo2 {
|
|
regulator-name = "vreg_l2d_0p9";
|
|
regulator-min-microvolt = <912000>;
|
|
regulator-max-microvolt = <958000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
|
|
regulator-allow-set-load;
|
|
regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
|
|
RPMH_REGULATOR_MODE_AUTO>;
|
|
};
|
|
|
|
vreg_l3d_0p8: ldo3 {
|
|
regulator-name = "vreg_l3d_0p8";
|
|
regulator-min-microvolt = <880000>;
|
|
regulator-max-microvolt = <880000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
|
|
regulator-allow-set-load;
|
|
regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
|
|
RPMH_REGULATOR_MODE_AUTO>;
|
|
};
|
|
|
|
vreg_l4d_1p2: ldo4 {
|
|
regulator-name = "vreg_l4d_1p2";
|
|
regulator-min-microvolt = <1200000>;
|
|
regulator-max-microvolt = <1200000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
|
|
regulator-allow-set-load;
|
|
regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
|
|
RPMH_REGULATOR_MODE_AUTO>;
|
|
};
|
|
};
|
|
|
|
regulators-2 {
|
|
compatible = "qcom,pmh0110-rpmh-regulators";
|
|
qcom,pmic-id = "F_E0";
|
|
|
|
vreg_s6f_0p5: smps6 {
|
|
regulator-name = "vreg_s6f_0p5";
|
|
regulator-min-microvolt = <300000>;
|
|
regulator-max-microvolt = <570000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
|
|
vreg_s7f_1p2: smps7 {
|
|
regulator-name = "vreg_s7f_1p2";
|
|
regulator-min-microvolt = <1224000>;
|
|
regulator-max-microvolt = <1372000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
|
|
vreg_s8f_1p8: smps8 {
|
|
regulator-name = "vreg_s8f_1p8";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <2000000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
|
|
vreg_l1f_1p2: ldo1 {
|
|
regulator-name = "vreg_l1f_1p2";
|
|
regulator-min-microvolt = <1200000>;
|
|
regulator-max-microvolt = <1200000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
|
|
regulator-allow-set-load;
|
|
regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
|
|
RPMH_REGULATOR_MODE_AUTO>;
|
|
};
|
|
|
|
vreg_l2f_1p2: ldo2 {
|
|
regulator-name = "vreg_l2f_1p2";
|
|
regulator-min-microvolt = <1200000>;
|
|
regulator-max-microvolt = <1200000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
|
|
regulator-allow-set-load;
|
|
regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
|
|
RPMH_REGULATOR_MODE_AUTO>;
|
|
};
|
|
|
|
vreg_l3f_0p8: ldo3 {
|
|
regulator-name = "vreg_l3f_0p8";
|
|
regulator-min-microvolt = <880000>;
|
|
regulator-max-microvolt = <936000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
|
|
regulator-allow-set-load;
|
|
regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
|
|
RPMH_REGULATOR_MODE_AUTO>;
|
|
};
|
|
|
|
vreg_l4f_0p8: ldo4 {
|
|
regulator-name = "vreg_l4f_0p8";
|
|
regulator-min-microvolt = <880000>;
|
|
regulator-max-microvolt = <912000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
|
|
regulator-allow-set-load;
|
|
regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
|
|
RPMH_REGULATOR_MODE_AUTO>;
|
|
};
|
|
};
|
|
|
|
regulators-3 {
|
|
compatible = "qcom,pmh0110-rpmh-regulators";
|
|
qcom,pmic-id = "G_E0";
|
|
|
|
vreg_s7g_0p9: smps7 {
|
|
regulator-name = "vreg_s7g_0p9";
|
|
regulator-min-microvolt = <880000>;
|
|
regulator-max-microvolt = <1100000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
|
|
vreg_s9g_1p0: smps9 {
|
|
regulator-name = "vreg_s9g_1p0";
|
|
regulator-min-microvolt = <1000000>;
|
|
regulator-max-microvolt = <1100000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
|
|
vreg_l1g_1p2: ldo1 {
|
|
regulator-name = "vreg_l1g_1p2";
|
|
regulator-min-microvolt = <1200000>;
|
|
regulator-max-microvolt = <1200000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
|
|
regulator-allow-set-load;
|
|
regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
|
|
RPMH_REGULATOR_MODE_AUTO>;
|
|
};
|
|
|
|
vreg_l2g_1p8: ldo2 {
|
|
regulator-name = "vreg_l2g_1p8";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
|
|
regulator-allow-set-load;
|
|
regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
|
|
RPMH_REGULATOR_MODE_AUTO>;
|
|
};
|
|
|
|
vreg_l3g_1p2: ldo3 {
|
|
regulator-name = "vreg_l3g_1p2";
|
|
regulator-min-microvolt = <1200000>;
|
|
regulator-max-microvolt = <1200000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
|
|
regulator-allow-set-load;
|
|
regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
|
|
RPMH_REGULATOR_MODE_AUTO>;
|
|
};
|
|
|
|
vreg_l4g_0p9: ldo4 {
|
|
regulator-name = "vreg_l4g_0p9";
|
|
regulator-min-microvolt = <880000>;
|
|
regulator-max-microvolt = <920000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
|
|
regulator-allow-set-load;
|
|
regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
|
|
RPMH_REGULATOR_MODE_AUTO>;
|
|
};
|
|
};
|
|
|
|
regulators-4 {
|
|
compatible = "qcom,pmh0110-rpmh-regulators";
|
|
qcom,pmic-id = "I_E0";
|
|
|
|
vreg_s7i_0p9: smps7 {
|
|
regulator-name = "vreg_s7i_0p9";
|
|
regulator-min-microvolt = <900000>;
|
|
regulator-max-microvolt = <972000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
|
|
vreg_l2i_1p2: ldo2 {
|
|
regulator-name = "vreg_l2i_1p2";
|
|
regulator-min-microvolt = <1200000>;
|
|
regulator-max-microvolt = <1200000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
|
|
regulator-allow-set-load;
|
|
regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
|
|
RPMH_REGULATOR_MODE_AUTO>;
|
|
};
|
|
|
|
vreg_l3i_0p8: ldo3 {
|
|
regulator-name = "vreg_l3i_0p8";
|
|
regulator-min-microvolt = <880000>;
|
|
regulator-max-microvolt = <920000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
|
|
regulator-allow-set-load;
|
|
regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
|
|
RPMH_REGULATOR_MODE_AUTO>;
|
|
};
|
|
};
|
|
|
|
regulators-5 {
|
|
compatible = "qcom,pmh0104-rpmh-regulators";
|
|
qcom,pmic-id = "J_E1";
|
|
|
|
vreg_s1j_0p8: smps1 {
|
|
regulator-name = "vreg_s1j_0p8";
|
|
regulator-min-microvolt = <400000>;
|
|
regulator-max-microvolt = <1000000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
|
|
vreg_s2j_0p8: smps2 {
|
|
regulator-name = "vreg_s2j_0p8";
|
|
regulator-min-microvolt = <500000>;
|
|
regulator-max-microvolt = <1100000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
|
|
vreg_s3j_1p2: smps3 {
|
|
regulator-name = "vreg_s3j_1p2";
|
|
regulator-min-microvolt = <1200000>;
|
|
regulator-max-microvolt = <1300000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
|
|
vreg_s4j_0p7: smps4 {
|
|
regulator-name = "vreg_s4j_0p7";
|
|
regulator-min-microvolt = <300000>;
|
|
regulator-max-microvolt = <1000000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
};
|
|
|
|
regulators-6 {
|
|
compatible = "qcom,pmr735d-rpmh-regulators";
|
|
qcom,pmic-id = "K_E1";
|
|
|
|
vreg_l1k_0p8: ldo1 {
|
|
regulator-name = "vreg_l1k_0p8";
|
|
regulator-min-microvolt = <300000>;
|
|
regulator-max-microvolt = <1100000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
regulator-allow-set-load;
|
|
regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
|
|
RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
|
|
vreg_l2k_0p7: ldo2 {
|
|
regulator-name = "vreg_l2k_0p7";
|
|
regulator-min-microvolt = <700000>;
|
|
regulator-max-microvolt = <1000000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
regulator-allow-set-load;
|
|
regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
|
|
RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
|
|
vreg_l3k_1p2: ldo3 {
|
|
regulator-name = "vreg_l3k_1p2";
|
|
regulator-min-microvolt = <1200000>;
|
|
regulator-max-microvolt = <1200000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
regulator-allow-set-load;
|
|
regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
|
|
RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
|
|
vreg_l4k_1p0: ldo4 {
|
|
regulator-name = "vreg_l4k_1p0";
|
|
regulator-min-microvolt = <1000000>;
|
|
regulator-max-microvolt = <1200000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
regulator-allow-set-load;
|
|
regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
|
|
RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
|
|
vreg_l5k_0p7: ldo5 {
|
|
regulator-name = "vreg_l5k_0p7";
|
|
regulator-min-microvolt = <700000>;
|
|
regulator-max-microvolt = <1000000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
regulator-allow-set-load;
|
|
regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
|
|
RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
|
|
vreg_l6k_1p7: ldo6 {
|
|
regulator-name = "vreg_l6k_1p7";
|
|
regulator-min-microvolt = <1700000>;
|
|
regulator-max-microvolt = <2000000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
regulator-allow-set-load;
|
|
regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
|
|
RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
|
|
vreg_l7k_0p7: ldo7 {
|
|
regulator-name = "vreg_l7k_0p7";
|
|
regulator-min-microvolt = <700000>;
|
|
regulator-max-microvolt = <848000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
regulator-allow-set-load;
|
|
regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
|
|
RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
};
|
|
|
|
regulators-7 {
|
|
compatible = "qcom,pm8010-rpmh-regulators";
|
|
qcom,pmic-id = "M_E1";
|
|
|
|
vreg_l1m_1p0: ldo1 {
|
|
regulator-name = "vreg_l1m_1p0";
|
|
regulator-min-microvolt = <1000000>;
|
|
regulator-max-microvolt = <1100000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
regulator-allow-set-load;
|
|
regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
|
|
RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
|
|
vreg_l2m_1p0: ldo2 {
|
|
regulator-name = "vreg_l2m_1p0";
|
|
regulator-min-microvolt = <1096000>;
|
|
regulator-max-microvolt = <1104000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
regulator-allow-set-load;
|
|
regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
|
|
RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
|
|
vreg_l3m_2p8: ldo3 {
|
|
regulator-name = "vreg_l3m_2p8";
|
|
regulator-min-microvolt = <2800000>;
|
|
regulator-max-microvolt = <2900000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
|
|
vreg_l4m_2p2: ldo4 {
|
|
regulator-name = "vreg_l4m_2p2";
|
|
regulator-min-microvolt = <2200000>;
|
|
regulator-max-microvolt = <2200000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
|
|
vreg_l6m_2p8: ldo6 {
|
|
regulator-name = "vreg_l6m_2p8";
|
|
regulator-min-microvolt = <2800000>;
|
|
regulator-max-microvolt = <2800000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
|
|
vreg_l7m_2p8: ldo7 {
|
|
regulator-name = "vreg_l7m_2p8";
|
|
regulator-min-microvolt = <2800000>;
|
|
regulator-max-microvolt = <2800000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
};
|
|
|
|
regulators-8 {
|
|
compatible = "qcom,pm8010-rpmh-regulators";
|
|
qcom,pmic-id = "N_E1";
|
|
|
|
vreg_l1n_1p1: ldo1 {
|
|
regulator-name = "vreg_l1n_1p1";
|
|
regulator-min-microvolt = <1096000>;
|
|
regulator-max-microvolt = <1104000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
regulator-allow-set-load;
|
|
regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
|
|
RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
|
|
vreg_l2n_1p2: ldo2 {
|
|
regulator-name = "vreg_l2n_1p2";
|
|
regulator-min-microvolt = <1200000>;
|
|
regulator-max-microvolt = <1200000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
regulator-allow-set-load;
|
|
regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
|
|
RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
|
|
vreg_l3n_1p8: ldo3 {
|
|
regulator-name = "vreg_l3n_1p8";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
|
|
vreg_l4n_1p8: ldo4 {
|
|
regulator-name = "vreg_l4n_1p8";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
|
|
vreg_l5n_2p8: ldo5 {
|
|
regulator-name = "vreg_l5n_2p8";
|
|
regulator-min-microvolt = <2800000>;
|
|
regulator-max-microvolt = <2800000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
|
|
vreg_l6n_2p8: ldo6 {
|
|
regulator-name = "vreg_l6n_2p8";
|
|
regulator-min-microvolt = <2800000>;
|
|
regulator-max-microvolt = <2800000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
|
|
vreg_l7n_3p3: ldo7 {
|
|
regulator-name = "vreg_l7n_3p3";
|
|
regulator-min-microvolt = <3304000>;
|
|
regulator-max-microvolt = <3304000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&lpass_vamacro {
|
|
pinctrl-0 = <&dmic01_default>, <&dmic23_default>;
|
|
pinctrl-names = "default";
|
|
|
|
vdd-micb-supply = <&vreg_l10b_1p8>;
|
|
qcom,dmic-sample-rate = <4800000>;
|
|
};
|
|
|
|
&mdss {
|
|
status = "okay";
|
|
};
|
|
|
|
&mdss_dsi0 {
|
|
vdda-supply = <&vreg_l1d_1p2>;
|
|
status = "okay";
|
|
|
|
panel@0 {
|
|
compatible = "novatek,nt37801";
|
|
reg = <0>;
|
|
|
|
pinctrl-0 = <&sde_dsi_active &sde_te_active &sde_esync0_suspend
|
|
&sde_mdp_vsync_p_1p2_active &sde_mdp_vsync_p_1p8_active
|
|
&sde_disp0_rst_1p2_active &sde_disp0_rst_1p8_active>;
|
|
pinctrl-1 = <&sde_dsi_suspend &sde_te_suspend &sde_esync0_suspend
|
|
&sde_mdp_vsync_p_1p2_active &sde_mdp_vsync_p_1p8_active
|
|
&sde_disp0_rst_1p2_active &sde_disp0_rst_1p8_active>;
|
|
pinctrl-names = "default", "sleep";
|
|
|
|
vci-supply = <&vreg_l13b_3p0>;
|
|
vdd-supply = <&vreg_l11b_1p0>;
|
|
vddio-supply = <&vreg_l12b_1p8>;
|
|
|
|
reset-gpios = <&tlmm 98 GPIO_ACTIVE_LOW>;
|
|
|
|
port {
|
|
panel0_in: endpoint {
|
|
remote-endpoint = <&mdss_dsi0_out>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&mdss_dsi0_out {
|
|
remote-endpoint = <&panel0_in>;
|
|
data-lanes = <0 1 2 3>;
|
|
};
|
|
|
|
&mdss_dsi0_phy {
|
|
vdds-supply = <&vreg_l3d_0p8>;
|
|
|
|
status = "okay";
|
|
};
|
|
|
|
&pcie0 {
|
|
pinctrl-0 = <&pcie0_default_state>;
|
|
pinctrl-names = "default";
|
|
|
|
status = "okay";
|
|
};
|
|
|
|
&pcie0_phy {
|
|
vdda-phy-supply = <&vreg_l3i_0p8>;
|
|
vdda-pll-supply = <&vreg_l1d_1p2>;
|
|
|
|
status = "okay";
|
|
};
|
|
|
|
&pcie_port0 {
|
|
wake-gpios = <&tlmm 104 GPIO_ACTIVE_HIGH>;
|
|
reset-gpios = <&tlmm 102 GPIO_ACTIVE_LOW>;
|
|
|
|
wifi@0 {
|
|
compatible = "pci17cb,1107";
|
|
reg = <0x10000 0x0 0x0 0x0 0x0>;
|
|
|
|
vddrfacmn-supply = <&vreg_pmu_rfa_cmn>;
|
|
vddaon-supply = <&vreg_pmu_aon_0p59>;
|
|
vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
|
|
vddwlmx-supply = <&vreg_pmu_wlmx_0p85>;
|
|
vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
|
|
vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
|
|
vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>;
|
|
vddpcie0p9-supply = <&vreg_pmu_pcie_0p9>;
|
|
vddpcie1p8-supply = <&vreg_pmu_pcie_1p8>;
|
|
};
|
|
};
|
|
|
|
&pmih0108_e1_eusb2_repeater {
|
|
vdd18-supply = <&vreg_l15b_1p8>;
|
|
vdd3-supply = <&vreg_l5b_3p1>;
|
|
};
|
|
|
|
&pmh0101_flash {
|
|
status = "okay";
|
|
|
|
led-0 {
|
|
function = LED_FUNCTION_FLASH;
|
|
function-enumerator = <0>;
|
|
color = <LED_COLOR_ID_YELLOW>;
|
|
led-sources = <1>, <4>;
|
|
led-max-microamp = <500000>;
|
|
flash-max-microamp = <2000000>;
|
|
flash-max-timeout-us = <1280000>;
|
|
};
|
|
|
|
led-1 {
|
|
function = LED_FUNCTION_FLASH;
|
|
function-enumerator = <1>;
|
|
color = <LED_COLOR_ID_WHITE>;
|
|
led-sources = <2>, <3>;
|
|
led-max-microamp = <500000>;
|
|
flash-max-microamp = <2000000>;
|
|
flash-max-timeout-us = <1280000>;
|
|
};
|
|
};
|
|
|
|
&pmh0101_pwm {
|
|
status = "okay";
|
|
|
|
multi-led {
|
|
color = <LED_COLOR_ID_RGB>;
|
|
function = LED_FUNCTION_STATUS;
|
|
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
led@1 {
|
|
reg = <1>;
|
|
color = <LED_COLOR_ID_RED>;
|
|
};
|
|
|
|
led@2 {
|
|
reg = <2>;
|
|
color = <LED_COLOR_ID_GREEN>;
|
|
};
|
|
|
|
led@3 {
|
|
reg = <3>;
|
|
color = <LED_COLOR_ID_BLUE>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&pmh0104_j_e1_gpios {
|
|
bt_default: bt-default-state {
|
|
pins = "gpio5";
|
|
function = "normal";
|
|
input-disable;
|
|
output-enable;
|
|
output-low;
|
|
bias-disable;
|
|
power-source = <1>;
|
|
};
|
|
};
|
|
|
|
&pmh0110_d_e0_gpios {
|
|
sde_mdp_vsync_p_1p2_active: sde-mdp-vsync-p-1p2-active-state {
|
|
pins = "gpio9";
|
|
function = "paired";
|
|
input-disable;
|
|
output-enable;
|
|
power-source = <2>; /* 1.2v */
|
|
};
|
|
|
|
sde_mdp_vsync_p_1p8_active: sde-mdp-vsync-p-1p8-active-state {
|
|
pins = "gpio10";
|
|
function = "paired";
|
|
input-enable;
|
|
output-disable;
|
|
power-source = <1>; /* 1.8v */
|
|
};
|
|
};
|
|
|
|
&pmh0110_f_e0_gpios {
|
|
sde_disp0_rst_1p2_active: sde-disp0-rst-1p2-active-state {
|
|
pins = "gpio9";
|
|
function = "paired";
|
|
input-enable;
|
|
output-disable;
|
|
power-source = <2>; /* 1.2v */
|
|
};
|
|
|
|
sde_disp0_rst_1p8_active: sde-disp0-rst-1p8-active-state {
|
|
pins = "gpio10";
|
|
function = "paired";
|
|
input-disable;
|
|
output-enable;
|
|
power-source = <1>; /* 1.8v */
|
|
};
|
|
};
|
|
|
|
&pon_resin {
|
|
linux,code = <KEY_VOLUMEDOWN>;
|
|
|
|
status = "okay";
|
|
};
|
|
|
|
&remoteproc_adsp {
|
|
firmware-name = "qcom/kaanapali/adsp.mbn",
|
|
"qcom/kaanapali/adsp_dtb.mbn";
|
|
|
|
status = "okay";
|
|
};
|
|
|
|
&remoteproc_cdsp {
|
|
firmware-name = "qcom/kaanapali/cdsp.mbn",
|
|
"qcom/kaanapali/cdsp_dtb.mbn";
|
|
|
|
status = "okay";
|
|
};
|
|
|
|
&sdhc_2 {
|
|
cd-gpios = <&tlmm 55 GPIO_ACTIVE_LOW>;
|
|
|
|
vmmc-supply = <&vreg_l9b_2p9>;
|
|
vqmmc-supply = <&vreg_l8b_1p8>;
|
|
|
|
bus-width = <4>;
|
|
no-sdio;
|
|
no-mmc;
|
|
|
|
pinctrl-0 = <&sdc2_default>;
|
|
pinctrl-1 = <&sdc2_sleep>;
|
|
pinctrl-names = "default", "sleep";
|
|
|
|
status = "okay";
|
|
};
|
|
|
|
&swr0 {
|
|
status = "okay";
|
|
|
|
/* WSA8845, Speaker North */
|
|
north_spkr: speaker@0,0 {
|
|
compatible = "sdw20217020400";
|
|
reg = <0 0>;
|
|
pinctrl-0 = <&spkr_0_sd_n_active>;
|
|
pinctrl-names = "default";
|
|
powerdown-gpios = <&tlmm 76 GPIO_ACTIVE_LOW>;
|
|
#sound-dai-cells = <0>;
|
|
sound-name-prefix = "SpkrLeft";
|
|
vdd-1p8-supply = <&vreg_l15b_1p8>;
|
|
vdd-io-supply = <&vreg_l2i_1p2>;
|
|
|
|
/*
|
|
* WSA8845 Port 1 (DAC) <=> SWR0 Port 1 (SPKR_L)
|
|
* WSA8845 Port 2 (COMP) <=> SWR0 Port 2 (SPKR_L_COMP)
|
|
* WSA8845 Port 3 (BOOST) <=> SWR0 Port 3 (SPKR_L_BOOST)
|
|
* WSA8845 Port 4 (PBR) <=> SWR0 Port 7 (PBR)
|
|
* WSA8845 Port 5 (VISENSE) <=> SWR0 Port 10 (SPKR_L_VI)
|
|
* WSA8845 Port 6 (CPS) <=> SWR0 Port 13 (CPS)
|
|
*/
|
|
qcom,port-mapping = <1 2 3 7 10 13>;
|
|
};
|
|
|
|
/* WSA8845, Speaker South */
|
|
south_spkr: speaker@0,1 {
|
|
compatible = "sdw20217020400";
|
|
reg = <0 1>;
|
|
pinctrl-0 = <&spkr_1_sd_n_active>;
|
|
pinctrl-names = "default";
|
|
powerdown-gpios = <&tlmm 77 GPIO_ACTIVE_LOW>;
|
|
#sound-dai-cells = <0>;
|
|
sound-name-prefix = "SpkrRight";
|
|
vdd-1p8-supply = <&vreg_l15b_1p8>;
|
|
vdd-io-supply = <&vreg_l2i_1p2>;
|
|
|
|
/*
|
|
* WSA8845 Port 1 (DAC) <=> SWR0 Port 4 (SPKR_R)
|
|
* WSA8845 Port 2 (COMP) <=> SWR0 Port 5 (SPKR_R_COMP)
|
|
* WSA8845 Port 3 (BOOST) <=> SWR0 Port 6 (SPKR_R_BOOST)
|
|
* WSA8845 Port 4 (PBR) <=> SWR0 Port 7 (PBR)
|
|
* WSA8845 Port 5 (VISENSE) <=> SWR0 Port 11 (SPKR_R_VI)
|
|
* WSA8845 Port 6 (CPS) <=> SWR0 Port 13 (CPS)
|
|
*/
|
|
qcom,port-mapping = <4 5 6 7 11 13>;
|
|
};
|
|
};
|
|
|
|
&swr1 {
|
|
status = "okay";
|
|
|
|
/* WCD9395 RX */
|
|
wcd_rx: codec@0,4 {
|
|
compatible = "sdw20217010e00";
|
|
reg = <0 4>;
|
|
|
|
/*
|
|
* WCD9395 RX Port 1 (HPH_L/R) <=> SWR1 Port 1 (HPH_L/R)
|
|
* WCD9395 RX Port 2 (CLSH) <=> SWR1 Port 2 (CLSH)
|
|
* WCD9395 RX Port 3 (COMP_L/R) <=> SWR1 Port 3 (COMP_L/R)
|
|
* WCD9395 RX Port 4 (LO) <=> SWR1 Port 4 (LO)
|
|
* WCD9395 RX Port 5 (DSD_L/R) <=> SWR1 Port 5 (DSD_L/R)
|
|
* WCD9395 RX Port 6 (HIFI_PCM_L/R) <=> SWR1 Port 9 (HIFI_PCM_L/R)
|
|
*/
|
|
qcom,rx-port-mapping = <1 2 3 4 5 9>;
|
|
};
|
|
};
|
|
|
|
&swr2 {
|
|
status = "okay";
|
|
|
|
/* WCD9395 TX */
|
|
wcd_tx: codec@0,3 {
|
|
compatible = "sdw20217010e00";
|
|
reg = <0 3>;
|
|
|
|
/*
|
|
* WCD9395 TX Port 1 (ADC1,2,3,4) <=> SWR2 Port 2 (TX SWR_INPUT 0,1,2,3)
|
|
* WCD9395 TX Port 2 (ADC3,4 & DMIC0,1) <=> SWR2 Port 2 (TX SWR_INPUT 0,1,2,3)
|
|
* WCD9395 TX Port 3 (DMIC0,1,2,3 & MBHC) <=> SWR2 Port 3 (TX SWR_INPUT 4,5,6,7)
|
|
* WCD9395 TX Port 4 (DMIC4,5,6,7) <=> SWR2 Port 4 (TX SWR_INPUT 8,9,10,11)
|
|
*/
|
|
qcom,tx-port-mapping = <2 2 3 4>;
|
|
};
|
|
};
|
|
|
|
&tlmm {
|
|
gpio-reserved-ranges = <36 4>, /* NFC eSE SPI */
|
|
<74 1>, /* eSE */
|
|
<119 2>, /* SoCCP */
|
|
<144 4>; /* CXM UART */
|
|
|
|
wlan_en: wlan-en-state {
|
|
pins = "gpio16";
|
|
function = "gpio";
|
|
drive-strength = <8>;
|
|
bias-pull-down;
|
|
};
|
|
|
|
sw_ctrl_default: sw-ctrl-default-state {
|
|
pins = "gpio18";
|
|
function = "gpio";
|
|
bias-pull-down;
|
|
};
|
|
|
|
spkr_0_sd_n_active: spkr-0-sd-n-active-state {
|
|
pins = "gpio76";
|
|
function = "gpio";
|
|
drive-strength = <16>;
|
|
bias-disable;
|
|
};
|
|
|
|
spkr_1_sd_n_active: spkr-1-sd-n-active-state {
|
|
pins = "gpio77";
|
|
function = "gpio";
|
|
drive-strength = <16>;
|
|
bias-disable;
|
|
};
|
|
|
|
sde_te_active: sde-te-active-state {
|
|
pins = "gpio86";
|
|
function = "mdp_vsync";
|
|
drive-strength = <2>;
|
|
bias-pull-down;
|
|
};
|
|
|
|
sde_te_suspend: sde-te-suspend-state {
|
|
pins = "gpio86";
|
|
function = "mdp_vsync";
|
|
drive-strength = <2>;
|
|
bias-pull-down;
|
|
};
|
|
|
|
sde_esync0_suspend: sde-esync0-suspend-state {
|
|
pins = "gpio88";
|
|
function = "mdp_esync0_out";
|
|
drive-strength = <2>;
|
|
bias-pull-down;
|
|
};
|
|
|
|
sde_dsi_active: sde-dsi-active-state {
|
|
pins = "gpio98";
|
|
function = "gpio";
|
|
drive-strength = <8>;
|
|
bias-disable;
|
|
};
|
|
|
|
sde_dsi_suspend: sde-dsi-suspend-state {
|
|
pins = "gpio98";
|
|
function = "gpio";
|
|
drive-strength = <2>;
|
|
bias-pull-down;
|
|
};
|
|
|
|
key_vol_up_default: key-vol-up-default-state {
|
|
pins = "gpio101";
|
|
function = "gpio";
|
|
output-disable;
|
|
bias-pull-up;
|
|
};
|
|
|
|
pcie0_default_state: pcie0-default-state {
|
|
perst-n-pins {
|
|
pins = "gpio102";
|
|
function = "gpio";
|
|
drive-strength = <2>;
|
|
bias-disable;
|
|
};
|
|
|
|
clkreq-n-pins {
|
|
pins = "gpio103";
|
|
function = "pcie0_clk_req_n";
|
|
drive-strength = <2>;
|
|
bias-pull-up;
|
|
};
|
|
|
|
wake-n-pins {
|
|
pins = "gpio104";
|
|
function = "gpio";
|
|
drive-strength = <2>;
|
|
bias-pull-up;
|
|
};
|
|
};
|
|
|
|
wcd_default: wcd-reset-n-active-state {
|
|
pins = "gpio161";
|
|
function = "gpio";
|
|
drive-strength = <16>;
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
&uart7 {
|
|
status = "okay";
|
|
};
|
|
|
|
&uart18 {
|
|
status = "okay";
|
|
|
|
bluetooth {
|
|
compatible = "qcom,wcn7850-bt";
|
|
|
|
vddrfacmn-supply = <&vreg_pmu_rfa_cmn>;
|
|
vddaon-supply = <&vreg_pmu_aon_0p59>;
|
|
vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
|
|
vddwlmx-supply = <&vreg_pmu_wlmx_0p85>;
|
|
vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
|
|
vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
|
|
vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>;
|
|
|
|
max-speed = <3200000>;
|
|
};
|
|
};
|
|
|
|
&ufs_mem_hc {
|
|
reset-gpios = <&tlmm 217 GPIO_ACTIVE_LOW>;
|
|
|
|
vcc-supply = <&vreg_l17b_2p5>;
|
|
vcc-max-microamp = <1200000>;
|
|
vccq-supply = <&vreg_l4d_1p2>;
|
|
vccq-max-microamp = <1200000>;
|
|
|
|
status = "okay";
|
|
};
|
|
|
|
&ufs_mem_phy {
|
|
vdda-phy-supply = <&vreg_l4g_0p9>;
|
|
vdda-pll-supply = <&vreg_l1d_1p2>;
|
|
|
|
status = "okay";
|
|
};
|
|
|
|
&usb {
|
|
dr_mode = "peripheral";
|
|
|
|
status = "okay";
|
|
};
|
|
|
|
&usb_hsphy {
|
|
vdd-supply = <&vreg_l4f_0p8>;
|
|
vdda12-supply = <&vreg_l1d_1p2>;
|
|
|
|
phys = <&pmih0108_e1_eusb2_repeater>;
|
|
|
|
status = "okay";
|
|
};
|
|
|
|
&usb_dp_qmpphy {
|
|
vdda-phy-supply = <&vreg_l1d_1p2>;
|
|
vdda-pll-supply = <&vreg_l4f_0p8>;
|
|
|
|
status = "okay";
|
|
};
|