566 lines
11 KiB
Devicetree
566 lines
11 KiB
Devicetree
// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
|
|
/*
|
|
* Copyright (c) 2025, Arduino SRL
|
|
*/
|
|
|
|
/dts-v1/;
|
|
|
|
#include <dt-bindings/leds/common.h>
|
|
#include <dt-bindings/usb/pd.h>
|
|
#include "agatti.dtsi"
|
|
#include "pm4125.dtsi"
|
|
|
|
/delete-node/ &cont_splash_memory;
|
|
|
|
/ {
|
|
model = "Arduino UnoQ";
|
|
compatible = "arduino,imola", "qcom,qrb2210", "qcom,qcm2290";
|
|
chassis-type = "embedded";
|
|
|
|
aliases {
|
|
serial0 = &uart4;
|
|
serial1 = &uart2;
|
|
serial2 = &uart3;
|
|
sdhc1 = &sdhc_1;
|
|
};
|
|
|
|
chosen {
|
|
stdout-path = "serial0:115200n8";
|
|
};
|
|
|
|
gpio-keys {
|
|
compatible = "gpio-keys";
|
|
label = "gpio-keys";
|
|
pinctrl-0 = <&key_volp_n>, <&key_vold_n>;
|
|
pinctrl-names = "default";
|
|
|
|
key-volume-up {
|
|
label = "Volume Up";
|
|
linux,code = <KEY_VOLUMEUP>;
|
|
gpios = <&tlmm 96 GPIO_ACTIVE_LOW>;
|
|
debounce-interval = <15>;
|
|
linux,can-disable;
|
|
wakeup-source;
|
|
};
|
|
|
|
key-volume-down {
|
|
label = "Volume Down";
|
|
linux,code = <KEY_VOLUMEDOWN>;
|
|
gpios = <&tlmm 36 GPIO_ACTIVE_LOW>;
|
|
debounce-interval = <15>;
|
|
linux,can-disable;
|
|
wakeup-source;
|
|
};
|
|
};
|
|
|
|
leds: leds {
|
|
compatible = "gpio-leds";
|
|
|
|
led-bt {
|
|
label = "unoq:bt-blue2";
|
|
function = LED_FUNCTION_BLUETOOTH;
|
|
color = <LED_COLOR_ID_BLUE>;
|
|
gpios = <&tlmm 47 GPIO_ACTIVE_HIGH>;
|
|
linux,default-trigger = "bluetooth-power";
|
|
default-state = "off";
|
|
};
|
|
|
|
led-panic {
|
|
label = "unoq:panic-red2";
|
|
function = LED_FUNCTION_INDICATOR;
|
|
color = <LED_COLOR_ID_RED>;
|
|
gpios = <&tlmm 39 GPIO_ACTIVE_HIGH>;
|
|
linux,default-trigger = "none";
|
|
default-state = "off";
|
|
panic-indicator;
|
|
};
|
|
|
|
led-wlan {
|
|
label = "unoq:wlan-green2";
|
|
function = LED_FUNCTION_WLAN;
|
|
color = <LED_COLOR_ID_GREEN>;
|
|
gpios = <&tlmm 40 GPIO_ACTIVE_HIGH>;
|
|
linux,default-trigger = "phy0tx";
|
|
default-state = "off";
|
|
};
|
|
|
|
ledb: led-user-blue {
|
|
label = "unoq:user-blue1";
|
|
gpios = <&tlmm 60 GPIO_ACTIVE_HIGH>;
|
|
color = <LED_COLOR_ID_BLUE>;
|
|
};
|
|
|
|
ledg: led-user-green {
|
|
label = "unoq:user-green1";
|
|
gpios = <&tlmm 42 GPIO_ACTIVE_HIGH>;
|
|
color = <LED_COLOR_ID_GREEN>;
|
|
};
|
|
|
|
ledr: led-user-red {
|
|
label = "unoq:user-red1";
|
|
gpios = <&tlmm 41 GPIO_ACTIVE_HIGH>;
|
|
color = <LED_COLOR_ID_RED>;
|
|
};
|
|
};
|
|
|
|
multi-led {
|
|
compatible = "leds-group-multicolor";
|
|
color = <LED_COLOR_ID_RGB>;
|
|
function = LED_FUNCTION_INDICATOR;
|
|
leds = <&ledr>, <&ledg>, <&ledb>;
|
|
};
|
|
|
|
vreg_anx_30: regulator-anx-30 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "anx30";
|
|
regulator-min-microvolt = <3000000>;
|
|
regulator-max-microvolt = <3000000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
/* PM4125 charger out, supplied by VBAT */
|
|
vph_pwr: regulator-vph-pwr {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vph_pwr";
|
|
regulator-min-microvolt = <3700000>;
|
|
regulator-max-microvolt = <3700000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
};
|
|
|
|
&gpi_dma0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&gpu {
|
|
status = "okay";
|
|
};
|
|
|
|
&gpu_zap_shader {
|
|
firmware-name = "qcom/qcm2290/a702_zap.mbn";
|
|
};
|
|
|
|
&i2c0 {
|
|
clock-frequency = <100000>;
|
|
|
|
status = "okay";
|
|
};
|
|
|
|
&i2c1 {
|
|
clock-frequency = <100000>;
|
|
|
|
status = "okay";
|
|
|
|
anx7625: encoder@58 {
|
|
compatible = "analogix,anx7625";
|
|
reg = <0x58>;
|
|
interrupts-extended = <&tlmm 81 IRQ_TYPE_EDGE_FALLING>;
|
|
vdd10-supply = <&pm4125_l11>;
|
|
vdd18-supply = <&pm4125_l15>;
|
|
vdd33-supply = <&vreg_anx_30>;
|
|
analogix,audio-enable;
|
|
analogix,lane0-swing = /bits/ 8 <0x14 0x54 0x64 0x74>;
|
|
analogix,lane1-swing = /bits/ 8 <0x14 0x54 0x64 0x74>;
|
|
|
|
pinctrl-0 = <&anx7625_int_pin>, <&anx7625_cable_det_pin>;
|
|
|
|
connector {
|
|
compatible = "usb-c-connector";
|
|
power-role = "sink";
|
|
data-role = "dual";
|
|
try-power-role = "sink";
|
|
|
|
pd-revision = /bits/ 8 <0x03 0x00 0x00 0x00>;
|
|
op-sink-microwatt = <15000000>;
|
|
sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)
|
|
PDO_VAR(5000, 20000, 3000)>;
|
|
|
|
ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
port@0 {
|
|
reg = <0>;
|
|
|
|
anx_hs_in: endpoint {
|
|
remote-endpoint = <&usb_dwc3_hs>;
|
|
};
|
|
};
|
|
|
|
port@1 {
|
|
reg = <1>;
|
|
|
|
anx_ss_in: endpoint {
|
|
remote-endpoint = <&usb_qmpphy_out>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
port@0 {
|
|
reg = <0>;
|
|
|
|
anx_dsi0_in: endpoint {
|
|
remote-endpoint = <&mdss_dsi0_out>;
|
|
data-lanes = <0 1 2 3>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&mdss {
|
|
status = "okay";
|
|
};
|
|
|
|
&mdss_dsi0 {
|
|
vdda-supply = <&pm4125_l5>;
|
|
|
|
status = "okay";
|
|
};
|
|
|
|
&mdss_dsi0_out {
|
|
remote-endpoint = <&anx_dsi0_in>;
|
|
data-lanes = <0 1 2 3>;
|
|
};
|
|
|
|
&mdss_dsi0_phy {
|
|
status = "okay";
|
|
};
|
|
|
|
&pm4125_vbus {
|
|
regulator-min-microamp = <500000>;
|
|
regulator-max-microamp = <500000>;
|
|
|
|
status = "okay";
|
|
};
|
|
|
|
&qupv3_id_0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&remoteproc_adsp {
|
|
firmware-name = "qcom/qcm2290/adsp.mbn";
|
|
|
|
status = "okay";
|
|
};
|
|
|
|
&remoteproc_mpss {
|
|
firmware-name = "qcom/qcm2290/modem.mbn";
|
|
|
|
status = "okay";
|
|
};
|
|
|
|
&rpm_requests {
|
|
regulators {
|
|
compatible = "qcom,rpm-pm2250-regulators";
|
|
vdd_s3-supply = <&vph_pwr>;
|
|
vdd_s4-supply = <&vph_pwr>;
|
|
vdd_l1_l2_l3_l5_l6_l7_l8_l9_l10_l11_l12-supply = <&pm4125_s3>;
|
|
vdd_l4_l17_l18_l19_l20_l21_l22-supply = <&vph_pwr>;
|
|
vdd_l13_l14_l15_l16-supply = <&pm4125_s4>;
|
|
|
|
pm4125_s3: s3 {
|
|
/* 0.4V-1.6625V -> 1.3V (Power tree requirements) */
|
|
regulator-min-microvolt = <1352000>;
|
|
regulator-max-microvolt = <1352000>;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
pm4125_s4: s4 {
|
|
/* 1.2V-2.35V -> 2.05V (Power tree requirements) */
|
|
regulator-min-microvolt = <2072000>;
|
|
regulator-max-microvolt = <2072000>;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
pm4125_l2: l2 {
|
|
/* LPDDR4X VDD2 */
|
|
regulator-min-microvolt = <1136000>;
|
|
regulator-max-microvolt = <1136000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
pm4125_l3: l3 {
|
|
/* LPDDR4X VDDQ */
|
|
regulator-min-microvolt = <616000>;
|
|
regulator-max-microvolt = <616000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
pm4125_l4: l4 {
|
|
/* max = 3.05V -> max = 2.7 to disable 3V signaling (SDHCI2) */
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <2700000>;
|
|
regulator-allow-set-load;
|
|
};
|
|
|
|
pm4125_l5: l5 {
|
|
/* CSI/DSI */
|
|
regulator-min-microvolt = <1232000>;
|
|
regulator-max-microvolt = <1232000>;
|
|
regulator-allow-set-load;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
pm4125_l6: l6 {
|
|
/* DRAM PLL */
|
|
regulator-min-microvolt = <928000>;
|
|
regulator-max-microvolt = <928000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
pm4125_l7: l7 {
|
|
/* Wi-Fi CX */
|
|
regulator-min-microvolt = <664000>;
|
|
regulator-max-microvolt = <664000>;
|
|
};
|
|
|
|
pm4125_l10: l10 {
|
|
/* Wi-Fi RFA */
|
|
regulator-min-microvolt = <1304000>;
|
|
regulator-max-microvolt = <1304000>;
|
|
};
|
|
|
|
pm4125_l11: l11 {
|
|
/* ANX7625 DVDD1P0V/AVDD1P0V */
|
|
regulator-min-microvolt = <1000000>;
|
|
regulator-max-microvolt = <1000000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
pm4125_l12: l12 {
|
|
/* USB PHYs */
|
|
regulator-min-microvolt = <928000>;
|
|
regulator-max-microvolt = <928000>;
|
|
regulator-allow-set-load;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
pm4125_l13: l13 {
|
|
/* USB/QFPROM/PLLs */
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-allow-set-load;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
pm4125_l14: l14 {
|
|
/* SDHCI1 EMMC VCCQ */
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-allow-set-load;
|
|
/* Broken hardware, never turn it off! */
|
|
regulator-always-on;
|
|
};
|
|
|
|
pm4125_l15: l15 {
|
|
/* VDDIO */
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-allow-set-load;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
pm4125_l20: l20 {
|
|
/* SDHCI1 EMMC */
|
|
regulator-min-microvolt = <2400000>;
|
|
regulator-max-microvolt = <3600000>;
|
|
regulator-allow-set-load;
|
|
};
|
|
|
|
pm4125_l21: l21 {
|
|
/* USB HS */
|
|
regulator-min-microvolt = <2960000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-allow-set-load;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
pm4125_l22: l22 {
|
|
/* Wi-Fi VDD */
|
|
regulator-min-microvolt = <3312000>;
|
|
regulator-max-microvolt = <3312000>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&sdhc_1 {
|
|
vmmc-supply = <&pm4125_l20>;
|
|
vqmmc-supply = <&pm4125_l14>;
|
|
pinctrl-0 = <&sdc1_state_on>;
|
|
pinctrl-1 = <&sdc1_state_off>;
|
|
pinctrl-names = "default", "sleep";
|
|
mmc-hs400-1_8v;
|
|
mmc-hs200-1_8v;
|
|
non-removable;
|
|
supports-cqe;
|
|
no-sdio;
|
|
no-sd;
|
|
|
|
status = "okay";
|
|
};
|
|
|
|
&spi5 {
|
|
status = "okay";
|
|
|
|
mcu@0 {
|
|
compatible = "arduino,unoq-mcu";
|
|
reg = <0>;
|
|
};
|
|
};
|
|
|
|
&tlmm {
|
|
jmisc_gpio18: jmisc-gpio18-state {
|
|
pins = "gpio18";
|
|
function = "gpio";
|
|
drive-strength = <2>;
|
|
bias-pull-down;
|
|
};
|
|
|
|
jmisc_gpio28: jmisc-gpio28-state {
|
|
pins = "gpio28";
|
|
function = "gpio";
|
|
drive-strength = <2>;
|
|
bias-pull-down;
|
|
};
|
|
|
|
key_vold_n: key-vold-n-state {
|
|
pins = "gpio36";
|
|
function = "gpio";
|
|
bias-pull-up;
|
|
output-disable;
|
|
};
|
|
|
|
anx7625_cable_det_pin: anx7625-cable-det-pins-state {
|
|
pins = "gpio46";
|
|
function = "gpio";
|
|
drive-strength = <16>;
|
|
output-disable;
|
|
bias-pull-up;
|
|
};
|
|
|
|
anx7625_int_pin: anx7625-int-pins-state {
|
|
pins = "gpio81";
|
|
function = "gpio";
|
|
drive-strength = <16>;
|
|
output-disable;
|
|
bias-pull-up;
|
|
};
|
|
|
|
key_volp_n: key-volp-n-state {
|
|
pins = "gpio96";
|
|
function = "gpio";
|
|
bias-pull-up;
|
|
output-disable;
|
|
};
|
|
|
|
jmisc_gpio98: jmisc-gpio98-state {
|
|
pins = "gpio98";
|
|
function = "gpio";
|
|
drive-strength = <2>;
|
|
bias-pull-down;
|
|
};
|
|
|
|
jmisc_gpio99: jmisc-gpio99-state {
|
|
pins = "gpio99";
|
|
function = "gpio";
|
|
drive-strength = <2>;
|
|
bias-pull-down;
|
|
};
|
|
|
|
jmisc_gpio100: jmisc-gpio100-state {
|
|
pins = "gpio100";
|
|
function = "gpio";
|
|
drive-strength = <2>;
|
|
bias-pull-down;
|
|
};
|
|
|
|
jmisc_gpio101: jmisc-gpio101-state {
|
|
pins = "gpio101";
|
|
function = "gpio";
|
|
drive-strength = <2>;
|
|
bias-pull-down;
|
|
};
|
|
};
|
|
|
|
&uart2 {
|
|
status = "okay";
|
|
};
|
|
|
|
/* UART connected to Bluetooth */
|
|
&uart3 {
|
|
status = "okay";
|
|
|
|
bluetooth {
|
|
compatible = "qcom,wcn3988-bt";
|
|
|
|
vddio-supply = <&pm4125_l15>;
|
|
vddxo-supply = <&pm4125_l13>;
|
|
vddrf-supply = <&pm4125_l10>;
|
|
vddch0-supply = <&pm4125_l22>;
|
|
enable-gpios = <&tlmm 87 GPIO_ACTIVE_HIGH>;
|
|
max-speed = <3000000>;
|
|
};
|
|
};
|
|
|
|
/* UART exposed in JCTL */
|
|
&uart4 {
|
|
compatible = "qcom,geni-debug-uart";
|
|
|
|
status = "okay";
|
|
};
|
|
|
|
&usb {
|
|
status = "okay";
|
|
};
|
|
|
|
&usb_dwc3_hs {
|
|
remote-endpoint = <&anx_hs_in>;
|
|
};
|
|
|
|
&usb_hsphy {
|
|
vdd-supply = <&pm4125_l12>;
|
|
vdda-pll-supply = <&pm4125_l13>;
|
|
vdda-phy-dpdm-supply = <&pm4125_l21>;
|
|
|
|
status = "okay";
|
|
};
|
|
|
|
&usb_qmpphy {
|
|
vdda-phy-supply = <&pm4125_l12>;
|
|
vdda-pll-supply = <&pm4125_l13>;
|
|
|
|
status = "okay";
|
|
};
|
|
|
|
&usb_qmpphy_out {
|
|
remote-endpoint = <&anx_ss_in>;
|
|
};
|
|
|
|
&wifi {
|
|
vdd-0.8-cx-mx-supply = <&pm4125_l7>;
|
|
vdd-1.8-xo-supply = <&pm4125_l13>;
|
|
vdd-1.3-rfa-supply = <&pm4125_l10>;
|
|
vdd-3.3-ch0-supply = <&pm4125_l22>;
|
|
qcom,ath10k-calibration-variant = "ArduinoImola";
|
|
firmware-name = "qcm2290";
|
|
|
|
status = "okay";
|
|
};
|
|
|
|
&xo_board {
|
|
clock-frequency = <38400000>;
|
|
};
|