617 lines
12 KiB
Devicetree
617 lines
12 KiB
Devicetree
// SPDX-License-Identifier: BSD-3-Clause
|
|
|
|
/dts-v1/;
|
|
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/sound/qcom,q6asm.h>
|
|
#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
|
|
|
|
#include "sc7180.dtsi"
|
|
|
|
#include "pm6150.dtsi"
|
|
#include "pm6150l.dtsi"
|
|
|
|
/delete-node/ &tz_mem;
|
|
/delete-node/ &ipa_fw_mem;
|
|
|
|
/ {
|
|
model = "ECS LIVA QC710";
|
|
compatible = "ecs,liva-qc710", "qcom,sc7180";
|
|
chassis-type = "desktop";
|
|
|
|
aliases {
|
|
bluetooth0 = &bluetooth;
|
|
hsuart0 = &uart3;
|
|
wifi0 = &wifi;
|
|
};
|
|
|
|
hdmi-bridge {
|
|
compatible = "algoltek,ag6311";
|
|
|
|
ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
port@0 {
|
|
reg = <0>;
|
|
|
|
hdmi_bridge_dp_in: endpoint {
|
|
remote-endpoint = <&usb_1_qmpphy_dp_out>;
|
|
};
|
|
};
|
|
|
|
port@1 {
|
|
reg = <1>;
|
|
|
|
hdmi_bridge_tmds_out: endpoint {
|
|
remote-endpoint = <&hdmi_con>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
hdmi-connector {
|
|
compatible = "hdmi-connector";
|
|
type = "a";
|
|
|
|
port {
|
|
hdmi_con: endpoint {
|
|
remote-endpoint = <&hdmi_bridge_tmds_out>;
|
|
};
|
|
};
|
|
};
|
|
|
|
reserved-memory {
|
|
gpu_mem: zap-shader@80840000 {
|
|
reg = <0x0 0x80840000 0 0x2000>;
|
|
no-map;
|
|
};
|
|
|
|
venus_mem: venus@85b00000 {
|
|
reg = <0x0 0x85b00000 0 0x500000>;
|
|
no-map;
|
|
};
|
|
|
|
mpss_mem: mpss@86000000 {
|
|
reg = <0x0 0x86000000 0x0 0x2000000>;
|
|
no-map;
|
|
};
|
|
|
|
adsp_mem: adsp@8e400000 {
|
|
reg = <0x0 0x8e400000 0x0 0x2800000>;
|
|
no-map;
|
|
};
|
|
|
|
wlan_mem: wlan@93900000 {
|
|
reg = <0x0 0x93900000 0x0 0x200000>;
|
|
no-map;
|
|
};
|
|
};
|
|
|
|
usb_a_connector: usb-a-connector {
|
|
compatible = "usb-a-connector";
|
|
|
|
port {
|
|
usb_a_connector_ss_in: endpoint {
|
|
remote-endpoint = <&usb_1_qmpphy_usb_ss_out>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&apps_rsc {
|
|
regulators-0 {
|
|
compatible = "qcom,pm6150-rpmh-regulators";
|
|
qcom,pmic-id = "a";
|
|
|
|
vreg_s1a_1p1: smps1 {
|
|
regulator-min-microvolt = <1128000>;
|
|
regulator-max-microvolt = <1128000>;
|
|
};
|
|
|
|
vreg_l4a_0p8: ldo4 {
|
|
regulator-min-microvolt = <824000>;
|
|
regulator-max-microvolt = <928000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
|
|
vreg_l9a_0p6: ldo9 {
|
|
regulator-min-microvolt = <488000>;
|
|
regulator-max-microvolt = <800000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
|
|
vreg_l10a_1p8: ldo10 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
vreg_l11a_1p8: ldo11 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
|
|
vreg_l12a_1p8: ldo12 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
|
|
vreg_l13a_1p8: ldo13 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
|
|
vreg_l14a_1p8: ldo14 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
|
|
vreg_l15a_1p8: ldo15 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
|
|
vreg_l16a_2p7: ldo16 {
|
|
regulator-min-microvolt = <2496000>;
|
|
regulator-max-microvolt = <3304000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
|
|
vreg_l17a_3p0: ldo17 {
|
|
regulator-min-microvolt = <2920000>;
|
|
regulator-max-microvolt = <3232000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
|
|
vreg_l18a_2p8: ldo18 {
|
|
regulator-min-microvolt = <2496000>;
|
|
regulator-max-microvolt = <3304000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
|
|
vreg_l19a_2p9: ldo19 {
|
|
regulator-min-microvolt = <2960000>;
|
|
regulator-max-microvolt = <2960000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
};
|
|
|
|
regulators-1 {
|
|
compatible = "qcom,pm6150l-rpmh-regulators";
|
|
qcom,pmic-id = "c";
|
|
|
|
vreg_s8c_1p3: smps8 {
|
|
regulator-min-microvolt = <1120000>;
|
|
regulator-max-microvolt = <1408000>;
|
|
};
|
|
|
|
vreg_l1c_1p8: ldo1 {
|
|
regulator-min-microvolt = <1616000>;
|
|
regulator-max-microvolt = <1984000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
|
|
vreg_l2c_1p3: ldo2 {
|
|
regulator-min-microvolt = <1168000>;
|
|
regulator-max-microvolt = <1304000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
|
|
vreg_l3c_1p2: ldo3 {
|
|
regulator-min-microvolt = <1144000>;
|
|
regulator-max-microvolt = <1304000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
|
|
vreg_l4c_1p8: ldo4 {
|
|
regulator-min-microvolt = <1648000>;
|
|
regulator-max-microvolt = <3304000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
|
|
};
|
|
|
|
vreg_l5c_1p8: ldo5 {
|
|
regulator-min-microvolt = <1648000>;
|
|
regulator-max-microvolt = <3304000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
|
|
};
|
|
|
|
vreg_l6c_2p9: ldo6 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <2950000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
|
|
vreg_l7c_3p0: ldo7 {
|
|
regulator-min-microvolt = <3000000>;
|
|
regulator-max-microvolt = <3312000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
|
|
};
|
|
|
|
vreg_l8c_1p8: ldo8 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
|
|
vreg_l9c_2p9: ldo9 {
|
|
regulator-min-microvolt = <2952000>;
|
|
regulator-max-microvolt = <2952000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
|
|
vreg_l10c_3p3: ldo10 {
|
|
regulator-min-microvolt = <3000000>;
|
|
regulator-max-microvolt = <3400000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
|
|
vreg_l11c_3p3: ldo11 {
|
|
regulator-min-microvolt = <3000000>;
|
|
regulator-max-microvolt = <3400000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
|
|
vreg_bob: bob {
|
|
regulator-min-microvolt = <3008000>;
|
|
regulator-max-microvolt = <3960000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&gpu {
|
|
status = "okay";
|
|
};
|
|
|
|
&gpu_zap_shader {
|
|
firmware-name = "qcom/sc7180/ecs/liva-qc710/qcdxkmsuc7180.mbn";
|
|
};
|
|
|
|
&mdss {
|
|
status = "okay";
|
|
};
|
|
|
|
&mdss_dp {
|
|
pinctrl-0 = <&dp_hot_plug_det>;
|
|
pinctrl-names = "default";
|
|
|
|
status = "okay";
|
|
};
|
|
|
|
&mdss_dp_out {
|
|
data-lanes = <0 1>;
|
|
remote-endpoint = <&usb_1_qmpphy_dp_in>;
|
|
};
|
|
|
|
&pm6150_rtc {
|
|
qcom,uefi-rtc-info;
|
|
|
|
status = "okay";
|
|
};
|
|
|
|
&qfprom {
|
|
vcc-supply = <&vreg_l11a_1p8>;
|
|
};
|
|
|
|
&qupv3_id_0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&qupv3_id_1 {
|
|
status = "okay";
|
|
};
|
|
|
|
&remoteproc_adsp {
|
|
memory-region = <&adsp_mem>;
|
|
firmware-name = "qcom/sc7180/ecs/liva-qc710/qcadsp7180.mbn";
|
|
|
|
status = "okay";
|
|
};
|
|
|
|
&remoteproc_mpss {
|
|
firmware-name = "qcom/sc7180/ecs/liva-qc710/qcmpss7180_nm.mbn";
|
|
|
|
status = "okay";
|
|
};
|
|
|
|
&sdhc_1 {
|
|
pinctrl-0 = <&sdc1_default>;
|
|
pinctrl-1 = <&sdc1_sleep>;
|
|
pinctrl-names = "default", "sleep";
|
|
vmmc-supply = <&vreg_l19a_2p9>;
|
|
vqmmc-supply = <&vreg_l12a_1p8>;
|
|
|
|
status = "okay";
|
|
};
|
|
|
|
&sdhc_2 {
|
|
pinctrl-0 = <&sdc2_default>;
|
|
pinctrl-1 = <&sdc2_sleep>;
|
|
pinctrl-names = "default", "sleep";
|
|
vmmc-supply = <&vreg_l9c_2p9>;
|
|
vqmmc-supply = <&vreg_l6c_2p9>;
|
|
|
|
cd-gpios = <&tlmm 69 GPIO_ACTIVE_LOW>;
|
|
|
|
status = "okay";
|
|
};
|
|
|
|
&tlmm {
|
|
/*
|
|
* The TZ seem to protect those because some boards can have
|
|
* fingerprint sensor connected to this range. Not connected
|
|
* on this board
|
|
*/
|
|
gpio-reserved-ranges = <58 5>;
|
|
|
|
qup_uart3_sleep: qup-uart3-sleep-state {
|
|
cts-pins {
|
|
/*
|
|
* Configure a pull-down on CTS to match the pull of
|
|
* the Bluetooth module.
|
|
*/
|
|
pins = "gpio38";
|
|
function = "gpio";
|
|
bias-pull-down;
|
|
};
|
|
|
|
rts-pins {
|
|
/*
|
|
* Configure pull-down on RTS. As RTS is active low
|
|
* signal, pull it low to indicate the BT SoC that it
|
|
* can wakeup the system anytime from suspend state by
|
|
* pulling RX low (by sending wakeup bytes).
|
|
*/
|
|
pins = "gpio39";
|
|
function = "gpio";
|
|
bias-pull-down;
|
|
};
|
|
|
|
tx-pins {
|
|
/*
|
|
* Configure pull-up on TX when it isn't actively driven
|
|
* to prevent BT SoC from receiving garbage during sleep.
|
|
*/
|
|
pins = "gpio40";
|
|
function = "gpio";
|
|
bias-pull-up;
|
|
};
|
|
|
|
rx-pins {
|
|
/*
|
|
* Configure a pull-up on RX. This is needed to avoid
|
|
* garbage data when the TX pin of the Bluetooth module
|
|
* is floating which may cause spurious wakeups.
|
|
*/
|
|
pins = "gpio41";
|
|
function = "gpio";
|
|
bias-pull-up;
|
|
};
|
|
};
|
|
|
|
sdc1_default: sdc1-default-state {
|
|
clk-pins {
|
|
pins = "sdc1_clk";
|
|
drive-strength = <16>;
|
|
bias-disable;
|
|
};
|
|
|
|
cmd-pins {
|
|
pins = "sdc1_cmd";
|
|
drive-strength = <16>;
|
|
bias-pull-up;
|
|
};
|
|
|
|
data-pins {
|
|
pins = "sdc1_data";
|
|
drive-strength = <16>;
|
|
bias-pull-up;
|
|
};
|
|
|
|
rclk-pins {
|
|
pins = "sdc1_rclk";
|
|
bias-pull-down;
|
|
};
|
|
};
|
|
|
|
sdc1_sleep: sdc1-sleep-state {
|
|
clk-pins {
|
|
pins = "sdc1_clk";
|
|
drive-strength = <2>;
|
|
bias-disable;
|
|
};
|
|
|
|
cmd-pins {
|
|
pins = "sdc1_cmd";
|
|
drive-strength = <2>;
|
|
bias-pull-up;
|
|
};
|
|
|
|
data-pins {
|
|
pins = "sdc1_data";
|
|
drive-strength = <2>;
|
|
bias-pull-up;
|
|
};
|
|
|
|
rclk-pins {
|
|
pins = "sdc1_rclk";
|
|
bias-pull-down;
|
|
};
|
|
};
|
|
|
|
sdc2_default: sdc2-default-state {
|
|
clk-pins {
|
|
pins = "sdc2_clk";
|
|
bias-disable;
|
|
drive-strength = <16>;
|
|
};
|
|
|
|
cmd-pins {
|
|
pins = "sdc2_cmd";
|
|
bias-pull-up;
|
|
drive-strength = <10>;
|
|
};
|
|
|
|
data-pins {
|
|
pins = "sdc2_data";
|
|
bias-pull-up;
|
|
drive-strength = <10>;
|
|
};
|
|
|
|
sd-cd-pins {
|
|
pins = "gpio69";
|
|
function = "gpio";
|
|
bias-pull-up;
|
|
drive-strength = <2>;
|
|
};
|
|
};
|
|
|
|
sdc2_sleep: sdc2-sleep-state {
|
|
clk-pins {
|
|
pins = "sdc2_clk";
|
|
bias-disable;
|
|
drive-strength = <2>;
|
|
};
|
|
|
|
cmd-pins {
|
|
pins = "sdc2_cmd";
|
|
bias-pull-up;
|
|
drive-strength = <2>;
|
|
};
|
|
|
|
data-pins {
|
|
pins = "sdc2_data";
|
|
bias-pull-up;
|
|
drive-strength = <2>;
|
|
};
|
|
|
|
sd-cd-pins {
|
|
pins = "gpio69";
|
|
function = "gpio";
|
|
bias-pull-up;
|
|
drive-strength = <2>;
|
|
};
|
|
};
|
|
};
|
|
&uart3 {
|
|
/delete-property/ interrupts;
|
|
interrupts-extended = <&intc GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>,
|
|
<&tlmm 41 IRQ_TYPE_EDGE_FALLING>;
|
|
|
|
pinctrl-1 = <&qup_uart3_sleep>;
|
|
pinctrl-names = "default", "sleep";
|
|
|
|
status = "okay";
|
|
|
|
bluetooth: bluetooth {
|
|
compatible = "qcom,wcn3991-bt";
|
|
vddio-supply = <&vreg_l10a_1p8>;
|
|
vddxo-supply = <&vreg_l1c_1p8>;
|
|
vddrf-supply = <&vreg_l2c_1p3>;
|
|
vddch0-supply = <&vreg_l10c_3p3>;
|
|
max-speed = <3200000>;
|
|
};
|
|
};
|
|
|
|
&usb_1 {
|
|
status = "okay";
|
|
};
|
|
|
|
&usb_1_dwc3 {
|
|
dr_mode = "host";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
hub@1 {
|
|
compatible = "usb5e3,608";
|
|
reg = <1>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
/* @1: 3.0 Type-A port on the back
|
|
* @2: 2.0 Type-A port the side
|
|
* @3: 2.0 Type-C port on the back
|
|
*/
|
|
|
|
ethernet@4 {
|
|
compatible = "usbbda,8152";
|
|
reg = <4>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&usb_1_hsphy {
|
|
vdd-supply = <&vreg_l4a_0p8>;
|
|
vdda-pll-supply = <&vreg_l11a_1p8>;
|
|
vdda-phy-dpdm-supply = <&vreg_l17a_3p0>;
|
|
qcom,imp-res-offset-value = <8>;
|
|
qcom,preemphasis-level = <QUSB2_V2_PREEMPHASIS_15_PERCENT>;
|
|
qcom,preemphasis-width = <QUSB2_V2_PREEMPHASIS_WIDTH_HALF_BIT>;
|
|
qcom,bias-ctrl-value = <0x22>;
|
|
qcom,charge-ctrl-value = <3>;
|
|
qcom,hsdisc-trim-value = <0>;
|
|
|
|
status = "okay";
|
|
};
|
|
|
|
&usb_1_qmpphy {
|
|
vdda-phy-supply = <&vreg_l3c_1p2>;
|
|
vdda-pll-supply = <&vreg_l4a_0p8>;
|
|
|
|
/delete-property/ mode-switch;
|
|
/delete-property/ orientation-switch;
|
|
|
|
status = "okay";
|
|
|
|
ports {
|
|
port@0 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
/delete-node/ endpoint;
|
|
|
|
usb_1_qmpphy_dp_out: endpoint@0 {
|
|
reg = <0>;
|
|
|
|
data-lanes = <3 2>;
|
|
remote-endpoint = <&hdmi_bridge_dp_in>;
|
|
};
|
|
|
|
usb_1_qmpphy_usb_ss_out: endpoint@1 {
|
|
reg = <1>;
|
|
|
|
data-lanes = <1 0>;
|
|
remote-endpoint = <&usb_a_connector_ss_in>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&usb_1_qmpphy_dp_in {
|
|
remote-endpoint = <&mdss_dp_out>;
|
|
};
|
|
|
|
&venus {
|
|
firmware-name = "qcom/sc7180/ecs/liva-qc710/qcvss7180.mbn";
|
|
};
|
|
|
|
&wifi {
|
|
vdd-0.8-cx-mx-supply = <&vreg_l9a_0p6>;
|
|
vdd-1.8-xo-supply = <&vreg_l1c_1p8>;
|
|
vdd-1.3-rfa-supply = <&vreg_l2c_1p3>;
|
|
vdd-3.3-ch0-supply = <&vreg_l10c_3p3>;
|
|
vdd-3.3-ch1-supply = <&vreg_l11c_3p3>;
|
|
|
|
qcom,calibration-variant = "ECS_QC710";
|
|
|
|
status = "okay";
|
|
};
|