1552 lines
32 KiB
Devicetree
1552 lines
32 KiB
Devicetree
// SPDX-License-Identifier: BSD-3-Clause
|
|
/*
|
|
* Copyright (c) 2023, Linaro Limited
|
|
* Copyright (c) 2025, Kancy Joe <kancy2333@outlook.com>
|
|
*/
|
|
|
|
/dts-v1/;
|
|
|
|
#include <dt-bindings/leds/common.h>
|
|
#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
|
|
#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
|
|
#include "sm8650.dtsi"
|
|
#include "pm8550.dtsi"
|
|
#include "pm8550b.dtsi"
|
|
#define PMK8550VE_SID 8
|
|
#include "pm8550ve.dtsi"
|
|
#include "pm8550vs.dtsi"
|
|
#include "pmk8550.dtsi"
|
|
|
|
/delete-node/ &rmtfs_mem;
|
|
/delete-node/ &hwfence_shbuf;
|
|
|
|
/ {
|
|
model = "AYANEO Pocket S2 (Pro)";
|
|
compatible = "ayaneo,pocket-s2", "qcom,sm8650";
|
|
chassis-type = "handset";
|
|
|
|
aliases {
|
|
serial0 = &uart15;
|
|
serial1 = &uart14;
|
|
};
|
|
|
|
wcd939x: audio-codec {
|
|
compatible = "qcom,wcd9395-codec", "qcom,wcd9390-codec";
|
|
|
|
pinctrl-0 = <&wcd_default>;
|
|
pinctrl-names = "default";
|
|
|
|
qcom,micbias1-microvolt = <1800000>;
|
|
qcom,micbias2-microvolt = <1800000>;
|
|
qcom,micbias3-microvolt = <1800000>;
|
|
qcom,micbias4-microvolt = <1800000>;
|
|
qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>;
|
|
qcom,mbhc-headset-vthreshold-microvolt = <1700000>;
|
|
qcom,mbhc-headphone-vthreshold-microvolt = <50000>;
|
|
qcom,rx-device = <&wcd_rx>;
|
|
qcom,tx-device = <&wcd_tx>;
|
|
|
|
reset-gpios = <&tlmm 107 GPIO_ACTIVE_LOW>;
|
|
|
|
vdd-buck-supply = <&vreg_l15b_1p8>;
|
|
vdd-rxtx-supply = <&vreg_l15b_1p8>;
|
|
vdd-io-supply = <&vreg_l15b_1p8>;
|
|
vdd-mic-bias-supply = <&vreg_bob1>;
|
|
|
|
#sound-dai-cells = <1>;
|
|
};
|
|
|
|
chosen {
|
|
stdout-path = "serial0:115200n8";
|
|
};
|
|
|
|
fan: fan {
|
|
compatible = "pwm-fan";
|
|
|
|
interrupts-extended = <&tlmm 14 IRQ_TYPE_EDGE_FALLING>;
|
|
|
|
pwms = <&pm8550_pwm 3 50000>;
|
|
|
|
fan-supply = <&fan_pwr>;
|
|
|
|
#cooling-cells = <2>;
|
|
cooling-levels = <0 16 32 45 60 80 105 130 155 180 205 230 255>;
|
|
|
|
pinctrl-0 = <&fan_int>, <&pwm_fan_ctrl_active>;
|
|
pinctrl-1 = <&pwm_fan_ctrl_sleep>;
|
|
pinctrl-names = "default", "sleep";
|
|
};
|
|
|
|
fan_pwr: fan-pwr-regulator {
|
|
compatible = "regulator-fixed";
|
|
|
|
regulator-name = "fan_pwr";
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
|
|
gpios = <&tlmm 125 GPIO_ACTIVE_HIGH>;
|
|
enable-active-high;
|
|
|
|
vin-supply = <&fan_vdd>;
|
|
|
|
pinctrl-0 = <&fan_pwr_pins>;
|
|
pinctrl-names = "default";
|
|
};
|
|
|
|
fan_vdd: fan-vdd-regulator {
|
|
compatible = "regulator-fixed";
|
|
|
|
regulator-name = "fan_vdd";
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
|
|
gpios = <&tlmm 124 GPIO_ACTIVE_HIGH>;
|
|
enable-active-high;
|
|
|
|
vin-supply = <&vph_pwr>;
|
|
|
|
pinctrl-0 = <&fan_vdd_pins>;
|
|
pinctrl-names = "default";
|
|
};
|
|
|
|
gpio-keys {
|
|
compatible = "gpio-keys";
|
|
|
|
pinctrl-0 = <&volume_up_n>;
|
|
pinctrl-names = "default";
|
|
|
|
key-volume-up {
|
|
label = "Volume Up";
|
|
linux,code = <KEY_VOLUMEUP>;
|
|
gpios = <&pm8550_gpios 6 GPIO_ACTIVE_LOW>;
|
|
debounce-interval = <15>;
|
|
linux,can-disable;
|
|
wakeup-source;
|
|
};
|
|
};
|
|
|
|
pmic-glink {
|
|
compatible = "qcom,sm8650-pmic-glink",
|
|
"qcom,sm8550-pmic-glink",
|
|
"qcom,pmic-glink";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
orientation-gpios = <&tlmm 29 GPIO_ACTIVE_HIGH>;
|
|
|
|
connector@0 {
|
|
compatible = "usb-c-connector";
|
|
reg = <0>;
|
|
|
|
power-role = "dual";
|
|
data-role = "dual";
|
|
|
|
ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
port@0 {
|
|
reg = <0>;
|
|
|
|
pmic_glink_hs_in: endpoint {
|
|
remote-endpoint = <&usb_1_dwc3_hs>;
|
|
};
|
|
};
|
|
|
|
port@1 {
|
|
reg = <1>;
|
|
|
|
pmic_glink_ss_in: endpoint {
|
|
remote-endpoint = <&redriver_ss_out>;
|
|
};
|
|
};
|
|
|
|
port@2 {
|
|
reg = <2>;
|
|
|
|
pmic_glink_sbu: endpoint {
|
|
remote-endpoint = <&wcd_usbss_sbu_mux>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
upd720201_avdd33_reg: upd720201-avdd33-regulator {
|
|
compatible = "regulator-fixed";
|
|
|
|
regulator-name = "upd720201_avdd33";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
|
|
gpios = <&tlmm 123 GPIO_ACTIVE_HIGH>;
|
|
enable-active-high;
|
|
|
|
vin-supply = <&vph_pwr>;
|
|
|
|
pinctrl-0 = <&upd720201_avdd33>;
|
|
pinctrl-names = "default";
|
|
};
|
|
|
|
upd720201_vdd10_reg: upd720201-vdd10-regulator {
|
|
compatible = "regulator-fixed";
|
|
|
|
regulator-name = "upd720201_vdd10";
|
|
regulator-min-microvolt = <1050000>;
|
|
regulator-max-microvolt = <1050000>;
|
|
|
|
gpios = <&tlmm 122 GPIO_ACTIVE_HIGH>;
|
|
enable-active-high;
|
|
|
|
vin-supply = <&vph_pwr>;
|
|
|
|
pinctrl-0 = <&upd720201_vdd10>;
|
|
pinctrl-names = "default";
|
|
};
|
|
|
|
upd720201_vdd33_reg: upd720201-vdd33-regulator {
|
|
compatible = "regulator-fixed";
|
|
|
|
regulator-name = "upd720201_vdd33";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
|
|
gpios = <&tlmm 121 GPIO_ACTIVE_HIGH>;
|
|
enable-active-high;
|
|
|
|
vin-supply = <&vph_pwr>;
|
|
|
|
pinctrl-0 = <&upd720201_vdd33>;
|
|
pinctrl-names = "default";
|
|
};
|
|
|
|
sound {
|
|
compatible = "qcom,sm8650-sndcard", "qcom,sm8450-sndcard";
|
|
model = "SM8650-APS2";
|
|
audio-routing = "SpkrLeft IN", "WSA_SPK1 OUT",
|
|
"SpkrRight IN", "WSA_SPK2 OUT",
|
|
"IN1_HPHL", "HPHL_OUT",
|
|
"IN2_HPHR", "HPHR_OUT",
|
|
"AMIC1", "MIC BIAS1",
|
|
"AMIC2", "MIC BIAS2",
|
|
"AMIC3", "MIC BIAS3",
|
|
"AMIC4", "MIC BIAS3",
|
|
"AMIC5", "MIC BIAS4",
|
|
"TX SWR_INPUT0", "ADC1_OUTPUT",
|
|
"TX SWR_INPUT1", "ADC2_OUTPUT",
|
|
"TX SWR_INPUT7", "DMIC1_OUTPUT",
|
|
"TX SWR_INPUT8", "DMIC2_OUTPUT";
|
|
|
|
wcd-playback-dai-link {
|
|
link-name = "WCD Playback";
|
|
|
|
codec {
|
|
sound-dai = <&wcd939x 0>,
|
|
<&swr1 0>,
|
|
<&lpass_rxmacro 0>;
|
|
};
|
|
|
|
cpu {
|
|
sound-dai = <&q6apmbedai RX_CODEC_DMA_RX_0>;
|
|
};
|
|
|
|
platform {
|
|
sound-dai = <&q6apm>;
|
|
};
|
|
};
|
|
|
|
wcd-capture-dai-link {
|
|
link-name = "WCD Capture";
|
|
codec {
|
|
sound-dai = <&wcd939x 1>,
|
|
<&swr2 0>,
|
|
<&lpass_txmacro 0>;
|
|
};
|
|
|
|
cpu {
|
|
sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>;
|
|
};
|
|
|
|
|
|
platform {
|
|
sound-dai = <&q6apm>;
|
|
};
|
|
};
|
|
|
|
wsa-dai-link {
|
|
link-name = "WSA Playback";
|
|
|
|
codec {
|
|
sound-dai = <&right_spkr>,
|
|
<&left_spkr>,
|
|
<&swr3 0>,
|
|
<&lpass_wsa2macro 0>;
|
|
};
|
|
|
|
cpu {
|
|
sound-dai = <&q6apmbedai WSA_CODEC_DMA_RX_0>;
|
|
};
|
|
|
|
platform {
|
|
sound-dai = <&q6apm>;
|
|
};
|
|
};
|
|
|
|
va-dai-link {
|
|
link-name = "VA Capture";
|
|
|
|
codec {
|
|
sound-dai = <&lpass_vamacro 0>;
|
|
};
|
|
|
|
cpu {
|
|
sound-dai = <&q6apmbedai VA_CODEC_DMA_TX_0>;
|
|
};
|
|
|
|
platform {
|
|
sound-dai = <&q6apm>;
|
|
};
|
|
};
|
|
|
|
dp-dai-link {
|
|
link-name = "DisplayPort Playback";
|
|
|
|
codec {
|
|
sound-dai = <&mdss_dp0>;
|
|
};
|
|
|
|
cpu {
|
|
sound-dai = <&q6apmbedai DISPLAY_PORT_RX_0>;
|
|
};
|
|
|
|
platform {
|
|
sound-dai = <&q6apm>;
|
|
};
|
|
};
|
|
};
|
|
|
|
vph_pwr: vph-pwr-regulator {
|
|
compatible = "regulator-fixed";
|
|
|
|
regulator-name = "vph_pwr";
|
|
regulator-min-microvolt = <3700000>;
|
|
regulator-max-microvolt = <3700000>;
|
|
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
wcn7850-pmu {
|
|
compatible = "qcom,wcn7850-pmu";
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&wlan_en>, <&bt_default>;
|
|
|
|
wlan-enable-gpios = <&tlmm 16 GPIO_ACTIVE_HIGH>;
|
|
bt-enable-gpios = <&tlmm 17 GPIO_ACTIVE_HIGH>;
|
|
|
|
vdd-supply = <&vreg_s4i_0p85>;
|
|
vddio-supply = <&vreg_l15b_1p8>;
|
|
vddio1p2-supply = <&vreg_l3c_1p2>;
|
|
vddaon-supply = <&vreg_s2c_0p8>;
|
|
vdddig-supply = <&vreg_s3c_0p9>;
|
|
vddrfa1p2-supply = <&vreg_s1c_1p2>;
|
|
vddrfa1p8-supply = <&vreg_s6c_1p8>;
|
|
|
|
clocks = <&rpmhcc RPMH_RF_CLK1>;
|
|
|
|
regulators {
|
|
vreg_pmu_rfa_cmn: ldo0 {
|
|
regulator-name = "vreg_pmu_rfa_cmn";
|
|
};
|
|
|
|
vreg_pmu_aon_0p59: ldo1 {
|
|
regulator-name = "vreg_pmu_aon_0p59";
|
|
};
|
|
|
|
vreg_pmu_wlcx_0p8: ldo2 {
|
|
regulator-name = "vreg_pmu_wlcx_0p8";
|
|
};
|
|
|
|
vreg_pmu_wlmx_0p85: ldo3 {
|
|
regulator-name = "vreg_pmu_wlmx_0p85";
|
|
};
|
|
|
|
vreg_pmu_btcmx_0p85: ldo4 {
|
|
regulator-name = "vreg_pmu_btcmx_0p85";
|
|
};
|
|
|
|
vreg_pmu_rfa_0p8: ldo5 {
|
|
regulator-name = "vreg_pmu_rfa_0p8";
|
|
};
|
|
|
|
vreg_pmu_rfa_1p2: ldo6 {
|
|
regulator-name = "vreg_pmu_rfa_1p2";
|
|
};
|
|
|
|
vreg_pmu_rfa_1p8: ldo7 {
|
|
regulator-name = "vreg_pmu_rfa_1p8";
|
|
};
|
|
|
|
vreg_pmu_pcie_0p9: ldo8 {
|
|
regulator-name = "vreg_pmu_pcie_0p9";
|
|
};
|
|
|
|
vreg_pmu_pcie_1p8: ldo9 {
|
|
regulator-name = "vreg_pmu_pcie_1p8";
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&apps_rsc {
|
|
regulators-0 {
|
|
compatible = "qcom,pm8550-rpmh-regulators";
|
|
|
|
vdd-bob1-supply = <&vph_pwr>;
|
|
vdd-bob2-supply = <&vph_pwr>;
|
|
vdd-l2-l13-l14-supply = <&vreg_bob1>;
|
|
vdd-l3-supply = <&vreg_s1c_1p2>;
|
|
vdd-l5-l16-supply = <&vreg_bob1>;
|
|
vdd-l6-l7-supply = <&vreg_bob1>;
|
|
vdd-l8-l9-supply = <&vreg_bob1>;
|
|
vdd-l11-supply = <&vreg_s1c_1p2>;
|
|
vdd-l12-supply = <&vreg_s6c_1p8>;
|
|
vdd-l15-supply = <&vreg_s6c_1p8>;
|
|
vdd-l17-supply = <&vreg_bob2>;
|
|
|
|
qcom,pmic-id = "b";
|
|
|
|
vreg_bob1: bob1 {
|
|
regulator-name = "vreg_bob1";
|
|
regulator-min-microvolt = <3296000>;
|
|
regulator-max-microvolt = <3960000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
|
|
vreg_bob2: bob2 {
|
|
regulator-name = "vreg_bob2";
|
|
regulator-min-microvolt = <2720000>;
|
|
regulator-max-microvolt = <3008000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
|
|
vreg_l2b_3p0: ldo2 {
|
|
regulator-name = "vreg_l2b_3p0";
|
|
regulator-min-microvolt = <3008000>;
|
|
regulator-max-microvolt = <3008000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
regulator-allow-set-load;
|
|
regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
|
|
RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
|
|
vreg_l5b_3p1: ldo5 {
|
|
regulator-name = "vreg_l5b_3p1";
|
|
regulator-min-microvolt = <3104000>;
|
|
regulator-max-microvolt = <3104000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
regulator-allow-set-load;
|
|
regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
|
|
RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
|
|
vreg_l6b_1p8: ldo6 {
|
|
regulator-name = "vreg_l6b_1p8";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <3008000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
regulator-allow-set-load;
|
|
regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
|
|
RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
|
|
vreg_l7b_1p8: ldo7 {
|
|
regulator-name = "vreg_l7b_1p8";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <3008000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
|
|
vreg_l8b_1p8: ldo8 {
|
|
regulator-name = "vreg_l8b_1p8";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <3008000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
regulator-allow-set-load;
|
|
regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
|
|
RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
|
|
vreg_l9b_2p9: ldo9 {
|
|
regulator-name = "vreg_l9b_2p9";
|
|
regulator-min-microvolt = <2960000>;
|
|
regulator-max-microvolt = <3008000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
regulator-allow-set-load;
|
|
regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
|
|
RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
|
|
vreg_l11b_1p2: ldo11 {
|
|
regulator-name = "vreg_l11b_1p2";
|
|
regulator-min-microvolt = <1200000>;
|
|
regulator-max-microvolt = <1504000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
regulator-allow-set-load;
|
|
regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
|
|
RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
|
|
vreg_l12b_1p8: ldo12 {
|
|
regulator-name = "vreg_l12b_1p8";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
regulator-allow-set-load;
|
|
regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
|
|
RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
|
|
vreg_l13b_3p0: ldo13 {
|
|
regulator-name = "vreg_l13b_3p0";
|
|
regulator-min-microvolt = <3000000>;
|
|
regulator-max-microvolt = <3000000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
regulator-allow-set-load;
|
|
regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
|
|
RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
|
|
vreg_l14b_3p2: ldo14 {
|
|
regulator-name = "vreg_l14b_3p2";
|
|
regulator-min-microvolt = <3200000>;
|
|
regulator-max-microvolt = <3200000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
regulator-allow-set-load;
|
|
regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
|
|
RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
|
|
vreg_l15b_1p8: ldo15 {
|
|
regulator-name = "vreg_l15b_1p8";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
regulator-allow-set-load;
|
|
regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
|
|
RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
|
|
vreg_l16b_2p8: ldo16 {
|
|
regulator-name = "vreg_l16b_2p8";
|
|
regulator-min-microvolt = <2800000>;
|
|
regulator-max-microvolt = <2800000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
regulator-allow-set-load;
|
|
regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
|
|
RPMH_REGULATOR_MODE_HPM>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
vreg_l17b_2p5: ldo17 {
|
|
regulator-name = "vreg_l17b_2p5";
|
|
regulator-min-microvolt = <2504000>;
|
|
regulator-max-microvolt = <2504000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
regulator-allow-set-load;
|
|
regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
|
|
RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
};
|
|
|
|
regulators-1 {
|
|
compatible = "qcom,pm8550vs-rpmh-regulators";
|
|
|
|
vdd-l1-supply = <&vreg_s1c_1p2>;
|
|
vdd-l2-supply = <&vreg_s1c_1p2>;
|
|
vdd-l3-supply = <&vreg_s1c_1p2>;
|
|
vdd-s1-supply = <&vph_pwr>;
|
|
vdd-s2-supply = <&vph_pwr>;
|
|
vdd-s3-supply = <&vph_pwr>;
|
|
vdd-s4-supply = <&vph_pwr>;
|
|
vdd-s5-supply = <&vph_pwr>;
|
|
vdd-s6-supply = <&vph_pwr>;
|
|
|
|
qcom,pmic-id = "c";
|
|
|
|
vreg_s1c_1p2: smps1 {
|
|
regulator-name = "vreg_s1c_1p2";
|
|
regulator-min-microvolt = <1256000>;
|
|
regulator-max-microvolt = <1348000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
|
|
vreg_s2c_0p8: smps2 {
|
|
regulator-name = "vreg_s2c_0p8";
|
|
regulator-min-microvolt = <852000>;
|
|
regulator-max-microvolt = <1036000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
|
|
vreg_s3c_0p9: smps3 {
|
|
regulator-name = "vreg_s3c_0p9";
|
|
regulator-min-microvolt = <976000>;
|
|
regulator-max-microvolt = <1064000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
|
|
vreg_s4c_1p2: smps4 {
|
|
regulator-name = "vreg_s4c_1p2";
|
|
regulator-min-microvolt = <1224000>;
|
|
regulator-max-microvolt = <1280000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
|
|
vreg_s5c_0p7: smps5 {
|
|
regulator-name = "vreg_s5c_0p7";
|
|
regulator-min-microvolt = <752000>;
|
|
regulator-max-microvolt = <900000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
|
|
vreg_s6c_1p8: smps6 {
|
|
regulator-name = "vreg_s6c_1p8";
|
|
regulator-min-microvolt = <1856000>;
|
|
regulator-max-microvolt = <2000000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
|
|
vreg_l1c_1p2: ldo1 {
|
|
regulator-name = "vreg_l1c_1p2";
|
|
regulator-min-microvolt = <1200000>;
|
|
regulator-max-microvolt = <1200000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
regulator-allow-set-load;
|
|
regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
|
|
RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
|
|
vreg_l3c_1p2: ldo3 {
|
|
regulator-name = "vreg_l3c_1p2";
|
|
regulator-min-microvolt = <1200000>;
|
|
regulator-max-microvolt = <1200000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
regulator-allow-set-load;
|
|
regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
|
|
RPMH_REGULATOR_MODE_HPM>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
};
|
|
|
|
regulators-2 {
|
|
compatible = "qcom,pm8550vs-rpmh-regulators";
|
|
|
|
vdd-l1-supply = <&vreg_s3c_0p9>;
|
|
|
|
qcom,pmic-id = "d";
|
|
|
|
vreg_l1d_0p88: ldo1 {
|
|
regulator-name = "vreg_l1d_0p88";
|
|
regulator-min-microvolt = <912000>;
|
|
regulator-max-microvolt = <920000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
regulator-allow-set-load;
|
|
regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
|
|
RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
};
|
|
|
|
regulators-3 {
|
|
compatible = "qcom,pm8550vs-rpmh-regulators";
|
|
|
|
vdd-l3-supply = <&vreg_s3c_0p9>;
|
|
|
|
qcom,pmic-id = "e";
|
|
|
|
vreg_l3e_0p9: ldo3 {
|
|
regulator-name = "vreg_l3e_0p9";
|
|
regulator-min-microvolt = <880000>;
|
|
regulator-max-microvolt = <920000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
regulator-allow-set-load;
|
|
regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
|
|
RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
};
|
|
|
|
regulators-4 {
|
|
compatible = "qcom,pm8550vs-rpmh-regulators";
|
|
|
|
vdd-l1-supply = <&vreg_s3c_0p9>;
|
|
vdd-l3-supply = <&vreg_s3c_0p9>;
|
|
|
|
qcom,pmic-id = "g";
|
|
|
|
vreg_l1g_0p91: ldo1 {
|
|
regulator-name = "vreg_l1g_0p91";
|
|
regulator-min-microvolt = <912000>;
|
|
regulator-max-microvolt = <920000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
regulator-allow-set-load;
|
|
regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
|
|
RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
|
|
vreg_l3g_0p91: ldo3 {
|
|
regulator-name = "vreg_l3g_0p91";
|
|
regulator-min-microvolt = <880000>;
|
|
regulator-max-microvolt = <912000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
regulator-allow-set-load;
|
|
regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
|
|
RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
};
|
|
|
|
regulators-5 {
|
|
compatible = "qcom,pm8550ve-rpmh-regulators";
|
|
|
|
vdd-l1-supply = <&vreg_s3c_0p9>;
|
|
vdd-l2-supply = <&vreg_s3c_0p9>;
|
|
vdd-l3-supply = <&vreg_s1c_1p2>;
|
|
vdd-s4-supply = <&vph_pwr>;
|
|
|
|
qcom,pmic-id = "i";
|
|
|
|
vreg_s4i_0p85: smps4 {
|
|
regulator-name = "vreg_s4i_0p85";
|
|
regulator-min-microvolt = <852000>;
|
|
regulator-max-microvolt = <1004000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
|
|
vreg_l1i_0p88: ldo1 {
|
|
regulator-name = "vreg_l1i_0p88";
|
|
regulator-min-microvolt = <880000>;
|
|
regulator-max-microvolt = <912000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
regulator-allow-set-load;
|
|
regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
|
|
RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
|
|
vreg_l2i_0p88: ldo2 {
|
|
regulator-name = "vreg_l2i_0p88";
|
|
regulator-min-microvolt = <880000>;
|
|
regulator-max-microvolt = <912000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
regulator-allow-set-load;
|
|
regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
|
|
RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
|
|
vreg_l3i_1p2: ldo3 {
|
|
regulator-name = "vreg_l3i_0p91";
|
|
regulator-min-microvolt = <1200000>;
|
|
regulator-max-microvolt = <1200000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
regulator-allow-set-load;
|
|
regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
|
|
RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&cpu2_top_thermal {
|
|
trips {
|
|
cpu2_active: cpu2-active {
|
|
temperature = <38000>;
|
|
hysteresis = <2000>;
|
|
type = "active";
|
|
};
|
|
};
|
|
|
|
cooling-maps {
|
|
map {
|
|
trip = <&cpu2_active>;
|
|
cooling-device = <&fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&cpu3_top_thermal {
|
|
trips {
|
|
cpu3_active: cpu3-active {
|
|
temperature = <38000>;
|
|
hysteresis = <2000>;
|
|
type = "active";
|
|
};
|
|
};
|
|
|
|
cooling-maps {
|
|
map {
|
|
trip = <&cpu3_active>;
|
|
cooling-device = <&fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&cpu4_top_thermal {
|
|
trips {
|
|
cpu4_active: cpu4-active {
|
|
temperature = <38000>;
|
|
hysteresis = <2000>;
|
|
type = "active";
|
|
};
|
|
};
|
|
|
|
cooling-maps {
|
|
map {
|
|
trip = <&cpu4_active>;
|
|
cooling-device = <&fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&cpu5_top_thermal {
|
|
trips {
|
|
cpu5_active: cpu5-active {
|
|
temperature = <38000>;
|
|
hysteresis = <2000>;
|
|
type = "active";
|
|
};
|
|
};
|
|
|
|
cooling-maps {
|
|
map {
|
|
trip = <&cpu5_active>;
|
|
cooling-device = <&fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&cpu6_top_thermal {
|
|
trips {
|
|
cpu6_active: cpu6-active {
|
|
temperature = <38000>;
|
|
hysteresis = <2000>;
|
|
type = "active";
|
|
};
|
|
};
|
|
|
|
cooling-maps {
|
|
map {
|
|
trip = <&cpu6_active>;
|
|
cooling-device = <&fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&cpu7_top_thermal {
|
|
trips {
|
|
cpu7_active: cpu7-active {
|
|
temperature = <38000>;
|
|
hysteresis = <2000>;
|
|
type = "active";
|
|
};
|
|
};
|
|
|
|
cooling-maps {
|
|
map {
|
|
trip = <&cpu7_active>;
|
|
cooling-device = <&fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&gpi_dma1 {
|
|
status = "okay";
|
|
};
|
|
|
|
&gpi_dma2 {
|
|
status = "okay";
|
|
};
|
|
|
|
&gpu0_cooling_maps {
|
|
map1 {
|
|
trip = <&gpu0_active>;
|
|
cooling-device = <&fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
|
|
};
|
|
};
|
|
|
|
&gpu1_cooling_maps {
|
|
map1 {
|
|
trip = <&gpu1_active>;
|
|
cooling-device = <&fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
|
|
};
|
|
};
|
|
|
|
&gpu2_cooling_maps {
|
|
map1 {
|
|
trip = <&gpu2_active>;
|
|
cooling-device = <&fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
|
|
};
|
|
};
|
|
|
|
&gpu3_cooling_maps {
|
|
map1 {
|
|
trip = <&gpu3_active>;
|
|
cooling-device = <&fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
|
|
};
|
|
};
|
|
|
|
&gpu4_cooling_maps {
|
|
map1 {
|
|
trip = <&gpu4_active>;
|
|
cooling-device = <&fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
|
|
};
|
|
};
|
|
|
|
&gpu5_cooling_maps {
|
|
map1 {
|
|
trip = <&gpu5_active>;
|
|
cooling-device = <&fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
|
|
};
|
|
};
|
|
|
|
&gpu6_cooling_maps {
|
|
map1 {
|
|
trip = <&gpu6_active>;
|
|
cooling-device = <&fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
|
|
};
|
|
};
|
|
|
|
&gpu7_cooling_maps {
|
|
map1 {
|
|
trip = <&gpu7_active>;
|
|
cooling-device = <&fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
|
|
};
|
|
};
|
|
|
|
&gpu0_trips {
|
|
gpu0_active: trip-active {
|
|
temperature = <38000>;
|
|
hysteresis = <2000>;
|
|
type = "active";
|
|
};
|
|
};
|
|
|
|
&gpu1_trips {
|
|
gpu1_active: trip-active {
|
|
temperature = <38000>;
|
|
hysteresis = <2000>;
|
|
type = "active";
|
|
};
|
|
};
|
|
|
|
&gpu2_trips {
|
|
gpu2_active: trip-active {
|
|
temperature = <38000>;
|
|
hysteresis = <2000>;
|
|
type = "active";
|
|
};
|
|
};
|
|
|
|
&gpu3_trips {
|
|
gpu3_active: trip-active {
|
|
temperature = <38000>;
|
|
hysteresis = <2000>;
|
|
type = "active";
|
|
};
|
|
};
|
|
|
|
&gpu4_trips {
|
|
gpu4_active: trip-active {
|
|
temperature = <38000>;
|
|
hysteresis = <2000>;
|
|
type = "active";
|
|
};
|
|
};
|
|
|
|
&gpu5_trips {
|
|
gpu5_active: trip-active {
|
|
temperature = <38000>;
|
|
hysteresis = <2000>;
|
|
type = "active";
|
|
};
|
|
};
|
|
|
|
&gpu6_trips {
|
|
gpu6_active: trip-active {
|
|
temperature = <38000>;
|
|
hysteresis = <2000>;
|
|
type = "active";
|
|
};
|
|
|
|
};
|
|
|
|
&gpu7_trips {
|
|
gpu7_active: trip-active {
|
|
temperature = <38000>;
|
|
hysteresis = <2000>;
|
|
type = "active";
|
|
};
|
|
};
|
|
|
|
&i2c3 {
|
|
clock-frequency = <100000>;
|
|
|
|
status = "okay";
|
|
|
|
wcd_usbss: typec-mux@e {
|
|
compatible = "qcom,wcd9395-usbss", "qcom,wcd9390-usbss";
|
|
reg = <0xe>;
|
|
|
|
vdd-supply = <&vreg_l15b_1p8>;
|
|
reset-gpios = <&tlmm 152 GPIO_ACTIVE_HIGH>;
|
|
|
|
mode-switch;
|
|
orientation-switch;
|
|
|
|
ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
port@0 {
|
|
reg = <0>;
|
|
|
|
wcd_usbss_sbu_mux: endpoint {
|
|
remote-endpoint = <&pmic_glink_sbu>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&i2c6 {
|
|
clock-frequency = <100000>;
|
|
|
|
status = "okay";
|
|
|
|
typec-mux@1c {
|
|
compatible = "onnn,nb7vpq904m";
|
|
reg = <0x1c>;
|
|
|
|
vcc-supply = <&vreg_l15b_1p8>;
|
|
|
|
retimer-switch;
|
|
orientation-switch;
|
|
|
|
ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
port@0 {
|
|
reg = <0>;
|
|
|
|
redriver_ss_out: endpoint {
|
|
remote-endpoint = <&pmic_glink_ss_in>;
|
|
};
|
|
};
|
|
|
|
port@1 {
|
|
reg = <1>;
|
|
|
|
redriver_ss_in: endpoint {
|
|
remote-endpoint = <&usb_dp_qmpphy_out>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&iris {
|
|
status = "okay";
|
|
};
|
|
|
|
&lpass_wsa2macro {
|
|
status = "okay";
|
|
};
|
|
|
|
&mdss {
|
|
status = "okay";
|
|
};
|
|
|
|
&mdss_dp0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&mdss_dp0_out {
|
|
status = "okay";
|
|
};
|
|
|
|
&pcie0 {
|
|
wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>;
|
|
perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>;
|
|
|
|
pinctrl-0 = <&pcie0_default_state>;
|
|
pinctrl-names = "default";
|
|
|
|
status = "okay";
|
|
};
|
|
|
|
&pcieport0 {
|
|
wifi@0 {
|
|
compatible = "pci17cb,1107";
|
|
reg = <0x10000 0x0 0x0 0x0 0x0>;
|
|
|
|
vddrfacmn-supply = <&vreg_pmu_rfa_cmn>;
|
|
vddaon-supply = <&vreg_pmu_aon_0p59>;
|
|
vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
|
|
vddwlmx-supply = <&vreg_pmu_wlmx_0p85>;
|
|
vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
|
|
vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
|
|
vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>;
|
|
vddpcie0p9-supply = <&vreg_pmu_pcie_0p9>;
|
|
vddpcie1p8-supply = <&vreg_pmu_pcie_1p8>;
|
|
};
|
|
};
|
|
|
|
&pcie0_phy {
|
|
vdda-phy-supply = <&vreg_l1i_0p88>;
|
|
vdda-pll-supply = <&vreg_l3i_1p2>;
|
|
|
|
status = "okay";
|
|
};
|
|
|
|
&pcie1 {
|
|
wake-gpios = <&tlmm 99 GPIO_ACTIVE_HIGH>;
|
|
perst-gpios = <&tlmm 97 GPIO_ACTIVE_LOW>;
|
|
|
|
pinctrl-0 = <&pcie1_default_state>;
|
|
pinctrl-names = "default";
|
|
|
|
status = "okay";
|
|
};
|
|
|
|
&pcie1_port0 {
|
|
/* Renesas μPD720201 PCIe USB3.0 HOST CONTROLLER */
|
|
usb-controller@0 {
|
|
compatible = "pci1912,0014";
|
|
reg = <0x10000 0x0 0x0 0x0 0x0>;
|
|
|
|
avdd33-supply = <&upd720201_avdd33_reg>;
|
|
vdd10-supply = <&upd720201_vdd10_reg>;
|
|
vdd33-supply = <&upd720201_vdd33_reg>;
|
|
|
|
pinctrl-0 = <&gamepad_pwr_en>;
|
|
pinctrl-names = "default";
|
|
};
|
|
};
|
|
|
|
&pcie1_phy {
|
|
vdda-phy-supply = <&vreg_l3e_0p9>;
|
|
vdda-pll-supply = <&vreg_l3i_1p2>;
|
|
vdda-qref-supply = <&vreg_l1i_0p88>;
|
|
|
|
status = "okay";
|
|
};
|
|
|
|
&pon_pwrkey {
|
|
status = "okay";
|
|
};
|
|
|
|
&pon_resin {
|
|
linux,code = <KEY_VOLUMEDOWN>;
|
|
|
|
status = "okay";
|
|
};
|
|
|
|
&pm8550_gpios {
|
|
volume_up_n: volume-up-n-state {
|
|
pins = "gpio6";
|
|
function = "normal";
|
|
bias-pull-up;
|
|
input-enable;
|
|
power-source = <1>;
|
|
};
|
|
|
|
pwm_fan_ctrl_active: pwm-fan-ctrl-active-state {
|
|
pins = "gpio9";
|
|
function = "func1";
|
|
bias-disable;
|
|
power-source = <0>;
|
|
qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
|
|
};
|
|
|
|
pwm_fan_ctrl_sleep: pwm-fan-ctrl-sleep-state {
|
|
pins = "gpio9";
|
|
function = "normal";
|
|
output-high;
|
|
bias-disable;
|
|
power-source = <0>;
|
|
qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
|
|
};
|
|
|
|
sdc2_card_det_n: sdc2-card-det-state {
|
|
pins = "gpio12";
|
|
function = "normal";
|
|
bias-pull-up;
|
|
input-enable;
|
|
output-disable;
|
|
power-source = <1>; /* 1.8 V */
|
|
};
|
|
};
|
|
|
|
&pm8550_pwm {
|
|
status = "okay";
|
|
|
|
multi-led {
|
|
color = <LED_COLOR_ID_RGB>;
|
|
function = LED_FUNCTION_STATUS;
|
|
label = "Power Status";
|
|
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
led@1 {
|
|
reg = <1>;
|
|
color = <LED_COLOR_ID_RED>;
|
|
};
|
|
|
|
led@2 {
|
|
reg = <2>;
|
|
color = <LED_COLOR_ID_GREEN>;
|
|
};
|
|
|
|
led@3 {
|
|
reg = <3>;
|
|
color = <LED_COLOR_ID_BLUE>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&pm8550b_eusb2_repeater {
|
|
vdd18-supply = <&vreg_l15b_1p8>;
|
|
vdd3-supply = <&vreg_l5b_3p1>;
|
|
};
|
|
|
|
&qup_i2c3_data_clk {
|
|
/* Use internal I2C pull-up */
|
|
bias-pull-up = <2200>;
|
|
};
|
|
|
|
&qupv3_id_0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&qupv3_id_1 {
|
|
status = "okay";
|
|
};
|
|
|
|
&remoteproc_adsp {
|
|
firmware-name = "qcom/sm8650/ayaneo/ps2/adsp.mbn",
|
|
"qcom/sm8650/ayaneo/ps2/adsp_dtb.mbn";
|
|
|
|
status = "okay";
|
|
};
|
|
|
|
&remoteproc_cdsp {
|
|
firmware-name = "qcom/sm8650/ayaneo/ps2/cdsp.mbn",
|
|
"qcom/sm8650/ayaneo/ps2/cdsp_dtb.mbn";
|
|
|
|
status = "okay";
|
|
};
|
|
|
|
&reserved_memory {
|
|
lost_reg_mem: lost-reg-mem {
|
|
reg = <0 0x9b09c000 0 0x4000>;
|
|
no-map;
|
|
};
|
|
|
|
hwfence_shbuf: hwfence-shbuf@d4e23000 {
|
|
reg = <0 0xd4e23000 0 0x2dd000>;
|
|
no-map;
|
|
};
|
|
|
|
splash_region: splash-region {
|
|
label = "cont_splash_region";
|
|
reg = <0 0xd5100000 0 0x2b00000>;
|
|
no-map;
|
|
};
|
|
};
|
|
|
|
&sdhc_2 {
|
|
cd-gpios = <&pm8550_gpios 12 GPIO_ACTIVE_LOW>;
|
|
|
|
vmmc-supply = <&vreg_l9b_2p9>;
|
|
vqmmc-supply = <&vreg_l8b_1p8>;
|
|
bus-width = <4>;
|
|
no-sdio;
|
|
no-mmc;
|
|
|
|
pinctrl-0 = <&sdc2_default>, <&sdc2_card_det_n>;
|
|
pinctrl-1 = <&sdc2_sleep>, <&sdc2_card_det_n>;
|
|
pinctrl-names = "default", "sleep";
|
|
|
|
status = "okay";
|
|
};
|
|
|
|
&sleep_clk {
|
|
clock-frequency = <32764>;
|
|
};
|
|
|
|
&swr1 {
|
|
status = "okay";
|
|
|
|
/* WCD9395 RX */
|
|
wcd_rx: codec@0,4 {
|
|
compatible = "sdw20217010e00";
|
|
reg = <0 4>;
|
|
|
|
/*
|
|
* WCD9395 RX Port 1 (HPH_L/R) <=> SWR1 Port 1 (HPH_L/R)
|
|
* WCD9395 RX Port 2 (CLSH) <=> SWR1 Port 2 (CLSH)
|
|
* WCD9395 RX Port 3 (COMP_L/R) <=> SWR1 Port 3 (COMP_L/R)
|
|
* WCD9395 RX Port 4 (LO) <=> SWR1 Port 4 (LO)
|
|
* WCD9395 RX Port 5 (DSD_L/R) <=> SWR1 Port 5 (DSD_L/R)
|
|
* WCD9395 RX Port 6 (HIFI_PCM_L/R) <=> SWR1 Port 9 (HIFI_PCM_L/R)
|
|
*/
|
|
qcom,rx-port-mapping = <1 2 3 4 5 9>;
|
|
};
|
|
};
|
|
|
|
&swr2 {
|
|
status = "okay";
|
|
|
|
/* WCD9395 TX */
|
|
wcd_tx: codec@0,3 {
|
|
compatible = "sdw20217010e00";
|
|
reg = <0 3>;
|
|
|
|
/*
|
|
* WCD9395 TX Port 1 (ADC1,2,3,4) <=> SWR2 Port 2 (TX SWR_INPUT 0,1,2,3)
|
|
* WCD9395 TX Port 2 (ADC3,4 & DMIC0,1) <=> SWR2 Port 2 (TX SWR_INPUT 0,1,2,3)
|
|
* WCD9395 TX Port 3 (DMIC0,1,2,3 & MBHC) <=> SWR2 Port 3 (TX SWR_INPUT 4,5,6,7)
|
|
* WCD9395 TX Port 4 (DMIC4,5,6,7) <=> SWR2 Port 4 (TX SWR_INPUT 8,9,10,11)
|
|
*/
|
|
qcom,tx-port-mapping = <2 2 3 4>;
|
|
};
|
|
};
|
|
|
|
&swr3 {
|
|
status = "okay";
|
|
|
|
pinctrl-0 = <&wsa2_swr_active>, <&spkr_23_sd_n_active>;
|
|
pinctrl-names = "default";
|
|
|
|
/* WSA8845, Speaker Left */
|
|
left_spkr: speaker@0,0 {
|
|
compatible = "sdw20217020400";
|
|
reg = <0 0>;
|
|
#sound-dai-cells = <0>;
|
|
reset-gpios = <&tlmm 77 GPIO_ACTIVE_LOW>;
|
|
sound-name-prefix = "SpkrLeft";
|
|
vdd-1p8-supply = <&vreg_l15b_1p8>;
|
|
vdd-io-supply = <&vreg_l3c_1p2>;
|
|
|
|
/*
|
|
* WSA8845 Port 1 (DAC) <=> SWR3 Port 1 (SPKR_L)
|
|
* WSA8845 Port 2 (COMP) <=> SWR3 Port 2 (SPKR_L_COMP)
|
|
* WSA8845 Port 3 (BOOST) <=> SWR3 Port 3 (SPKR_L_BOOST)
|
|
* WSA8845 Port 4 (PBR) <=> SWR3 Port 7 (PBR)
|
|
* WSA8845 Port 5 (VISENSE) <=> SWR3 Port 10 (SPKR_L_VI)
|
|
* WSA8845 Port 6 (CPS) <=> SWR3 Port 13 (CPS)
|
|
*/
|
|
qcom,port-mapping = <1 2 3 7 10 13>;
|
|
};
|
|
|
|
/* WSA8845, Speaker Right */
|
|
right_spkr: speaker@0,1 {
|
|
compatible = "sdw20217020400";
|
|
reg = <0 1>;
|
|
#sound-dai-cells = <0>;
|
|
reset-gpios = <&tlmm 77 GPIO_ACTIVE_LOW>;
|
|
sound-name-prefix = "SpkrRight";
|
|
vdd-1p8-supply = <&vreg_l15b_1p8>;
|
|
vdd-io-supply = <&vreg_l3c_1p2>;
|
|
|
|
/*
|
|
* WSA8845 Port 1 (DAC) <=> SWR3 Port 4 (SPKR_R)
|
|
* WSA8845 Port 2 (COMP) <=> SWR3 Port 5 (SPKR_R_COMP)
|
|
* WSA8845 Port 3 (BOOST) <=> SWR3 Port 6 (SPKR_R_BOOST)
|
|
* WSA8845 Port 4 (PBR) <=> SWR3 Port 7 (PBR)
|
|
* WSA8845 Port 5 (VISENSE) <=> SWR3 Port 11 (SPKR_R_VI)
|
|
* WSA8845 Port 6 (CPS) <=> SWR3 Port 13 (CPS)
|
|
*/
|
|
qcom,port-mapping = <4 5 6 7 11 13>;
|
|
};
|
|
};
|
|
|
|
&tlmm {
|
|
/* Reserved I/Os for NFC */
|
|
gpio-reserved-ranges = <32 4>, <36 1>, <38 6>, <74 1>;
|
|
|
|
bt_default: bt-default-state {
|
|
bt-en-pins {
|
|
pins = "gpio17";
|
|
function = "gpio";
|
|
drive-strength = <16>;
|
|
bias-disable;
|
|
};
|
|
|
|
sw-ctrl-pins {
|
|
pins = "gpio18";
|
|
function = "gpio";
|
|
bias-pull-down;
|
|
};
|
|
};
|
|
|
|
fan_pwr_pins: fan-pwr-state {
|
|
pins = "gpio125";
|
|
function = "gpio";
|
|
drive-strength = <2>;
|
|
bias-disable;
|
|
};
|
|
|
|
fan_vdd_pins: fan-vdd-state {
|
|
pins = "gpio124";
|
|
function = "gpio";
|
|
drive-strength = <2>;
|
|
bias-disable;
|
|
};
|
|
|
|
fan_int: fan-int-state {
|
|
pins = "gpio14";
|
|
function = "gpio";
|
|
drive-strength = <2>;
|
|
bias-pull-up;
|
|
};
|
|
|
|
upd720201_avdd33: upd720201-avdd33-state {
|
|
pins = "gpio123";
|
|
function = "gpio";
|
|
drive-strength = <2>;
|
|
bias-disable;
|
|
};
|
|
|
|
upd720201_vdd10: pd720201-vdd10-state {
|
|
pins = "gpio122";
|
|
function = "gpio";
|
|
drive-strength = <2>;
|
|
bias-disable;
|
|
};
|
|
|
|
upd720201_vdd33: upd720201-vdd33-state {
|
|
pins = "gpio121";
|
|
function = "gpio";
|
|
drive-strength = <2>;
|
|
bias-disable;
|
|
};
|
|
|
|
gamepad_pwr_en: gamepad-pwr-en-active-state {
|
|
pins = "gpio28";
|
|
function = "gpio";
|
|
drive-strength = <2>;
|
|
bias-disable;
|
|
output-high;
|
|
};
|
|
|
|
spkr_23_sd_n_active: spkr-23-sd-n-active-state {
|
|
pins = "gpio77";
|
|
function = "gpio";
|
|
drive-strength = <16>;
|
|
bias-disable;
|
|
};
|
|
|
|
spkr_01_sd_n_active: spkr-01-sd-n-active-state {
|
|
pins = "gpio21";
|
|
function = "gpio";
|
|
drive-strength = <16>;
|
|
bias-disable;
|
|
};
|
|
|
|
wcd_default: wcd-reset-n-active-state {
|
|
pins = "gpio107";
|
|
function = "gpio";
|
|
drive-strength = <16>;
|
|
bias-disable;
|
|
};
|
|
|
|
wlan_en: wlan-en-state {
|
|
pins = "gpio16";
|
|
function = "gpio";
|
|
drive-strength = <8>;
|
|
bias-pull-down;
|
|
};
|
|
};
|
|
|
|
&uart14 {
|
|
status = "okay";
|
|
|
|
bluetooth {
|
|
compatible = "qcom,wcn7850-bt";
|
|
|
|
vddrfacmn-supply = <&vreg_pmu_rfa_cmn>;
|
|
vddaon-supply = <&vreg_pmu_aon_0p59>;
|
|
vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
|
|
vddwlmx-supply = <&vreg_pmu_wlmx_0p85>;
|
|
vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
|
|
vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
|
|
vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>;
|
|
|
|
max-speed = <3200000>;
|
|
};
|
|
};
|
|
|
|
&uart15 {
|
|
status = "okay";
|
|
};
|
|
|
|
&ufs_mem_hc {
|
|
reset-gpios = <&tlmm 210 GPIO_ACTIVE_LOW>;
|
|
|
|
vcc-supply = <&vreg_l17b_2p5>;
|
|
vcc-max-microamp = <1300000>;
|
|
vccq-supply = <&vreg_l1c_1p2>;
|
|
vccq-max-microamp = <1200000>;
|
|
|
|
status = "okay";
|
|
};
|
|
|
|
&ufs_mem_phy {
|
|
vdda-phy-supply = <&vreg_l1d_0p88>;
|
|
vdda-pll-supply = <&vreg_l3i_1p2>;
|
|
|
|
status = "okay";
|
|
};
|
|
|
|
/*
|
|
* DPAUX -> WCD9395 -> USB_SBU -> USB-C
|
|
* eUSB2 DP/DM -> PM85550HS -> eUSB2 DP/DM -> WCD9395 -> USB-C
|
|
* USB SS -> NB7VPQ904MMUTWG -> USB-C
|
|
*/
|
|
|
|
&usb_1 {
|
|
dr_mode = "otg";
|
|
usb-role-switch;
|
|
|
|
status = "okay";
|
|
};
|
|
|
|
&usb_1_dwc3_hs {
|
|
remote-endpoint = <&pmic_glink_hs_in>;
|
|
};
|
|
|
|
&usb_1_hsphy {
|
|
vdd-supply = <&vreg_l1i_0p88>;
|
|
vdda12-supply = <&vreg_l3i_1p2>;
|
|
|
|
phys = <&pm8550b_eusb2_repeater>;
|
|
|
|
status = "okay";
|
|
};
|
|
|
|
&usb_dp_qmpphy {
|
|
vdda-phy-supply = <&vreg_l3i_1p2>;
|
|
vdda-pll-supply = <&vreg_l3g_0p91>;
|
|
|
|
status = "okay";
|
|
};
|
|
|
|
&usb_dp_qmpphy_out {
|
|
remote-endpoint = <&redriver_ss_in>;
|
|
};
|
|
|
|
&xo_board {
|
|
clock-frequency = <76800000>;
|
|
};
|