1081 lines
22 KiB
Devicetree
1081 lines
22 KiB
Devicetree
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
|
/*
|
|
* Copyright (c) 2026 Rockchip Electronics Co., Ltd.
|
|
*
|
|
*/
|
|
|
|
/dts-v1/;
|
|
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/input/input.h>
|
|
#include <dt-bindings/pinctrl/rockchip.h>
|
|
#include <dt-bindings/soc/rockchip,vop2.h>
|
|
#include "rk3576.dtsi"
|
|
|
|
/ {
|
|
model = "Rockchip RK3576 EVB2 V10 Board";
|
|
compatible = "rockchip,rk3576-evb2-v10", "rockchip,rk3576";
|
|
|
|
aliases {
|
|
ethernet0 = &gmac0;
|
|
ethernet1 = &gmac1;
|
|
mmc0 = &sdhci;
|
|
mmc1 = &sdmmc;
|
|
};
|
|
|
|
chosen {
|
|
stdout-path = "serial0:1500000n8";
|
|
};
|
|
|
|
dp-con {
|
|
compatible = "dp-connector";
|
|
dp-pwr-supply = <&vcc3v3_dp_port>;
|
|
label = "DP OUT";
|
|
type = "full-size";
|
|
|
|
port {
|
|
dp0_con_in: endpoint {
|
|
remote-endpoint = <&dp0_out_con>;
|
|
};
|
|
};
|
|
};
|
|
|
|
hdmi-con {
|
|
compatible = "hdmi-connector";
|
|
type = "a";
|
|
|
|
port {
|
|
hdmi_con_in: endpoint {
|
|
remote-endpoint = <&hdmi_out_con>;
|
|
};
|
|
};
|
|
};
|
|
|
|
keys {
|
|
compatible = "adc-keys";
|
|
io-channels = <&saradc 1>;
|
|
io-channel-names = "buttons";
|
|
keyup-threshold-microvolt = <1800000>;
|
|
poll-interval = <100>;
|
|
|
|
button-back {
|
|
label = "back";
|
|
linux,code = <KEY_BACK>;
|
|
press-threshold-microvolt = <1235000>;
|
|
};
|
|
|
|
button-menu {
|
|
label = "menu";
|
|
linux,code = <KEY_MENU>;
|
|
press-threshold-microvolt = <890000>;
|
|
};
|
|
|
|
button-vol-down {
|
|
label = "volume down";
|
|
linux,code = <KEY_VOLUMEDOWN>;
|
|
press-threshold-microvolt = <417000>;
|
|
};
|
|
|
|
button-vol-up {
|
|
label = "volume up";
|
|
linux,code = <KEY_VOLUMEUP>;
|
|
press-threshold-microvolt = <17000>;
|
|
};
|
|
};
|
|
|
|
leds {
|
|
compatible = "gpio-leds";
|
|
|
|
work_led: led-0 {
|
|
gpios = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>;
|
|
linux,default-trigger = "heartbeat";
|
|
};
|
|
};
|
|
|
|
sdio_pwrseq: sdio-pwrseq {
|
|
compatible = "mmc-pwrseq-simple";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&wifi_pwren>;
|
|
|
|
/*
|
|
* On the module itself this is one of these (depending
|
|
* on the actual card populated):
|
|
* - SDIO_RESET_L_WL_REG_ON
|
|
* - PDN (power down when low)
|
|
*/
|
|
post-power-on-delay-ms = <200>;
|
|
reset-gpios = <&gpio1 RK_PC6 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
vbus5v0_usb0: regulator-vbus5v0-usb0 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vcc5v0_usb3_host0";
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
enable-active-high;
|
|
gpio = <&gpio0 RK_PD1 GPIO_ACTIVE_HIGH>;
|
|
vin-supply = <&vcc5v0_device>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&usb_otg0_pwren>;
|
|
};
|
|
|
|
vbus5v0_usb1: regulator-vcc5v0-usb1 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vcc5v0_usb3_host1";
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
enable-active-high;
|
|
gpio = <&gpio0 RK_PC3 GPIO_ACTIVE_HIGH>;
|
|
vin-supply = <&vcc5v0_device>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&usb_host_pwren>;
|
|
};
|
|
|
|
vcc12v_dcin: regulator-vcc12v-dcin {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vcc12v_dcin";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <12000000>;
|
|
regulator-max-microvolt = <12000000>;
|
|
};
|
|
|
|
vcc1v2_ufs_vccq_s0: regulator-vcc1v2-ufs-vccq-s0 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vcc1v2_ufs_vccq_s0";
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
regulator-min-microvolt = <1200000>;
|
|
regulator-max-microvolt = <1200000>;
|
|
vin-supply = <&vcc_sys>;
|
|
};
|
|
|
|
vcc1v8_ufs_vccq2_s0: regulator-vcc1v8-ufs-vccq2-s0 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vcc1v8_ufs_vccq2_s0";
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
vin-supply = <&vcc_1v8_s3>;
|
|
};
|
|
|
|
vcc3v3_dp_port: regulator-vcc3v3-dp-port {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vcc3v3_dp_port";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
enable-active-high;
|
|
gpios = <&gpio0 RK_PC2 GPIO_ACTIVE_HIGH>;
|
|
vin-supply = <&vcc_3v3_s3>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&image_pwren>;
|
|
};
|
|
|
|
vcc3v3_pcie1: regulator-vcc3v3-pcie1 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vcc3v3_pcie1";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
enable-active-high;
|
|
gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>;
|
|
startup-delay-us = <5000>;
|
|
vin-supply = <&vcc12v_dcin>;
|
|
};
|
|
|
|
vcc3v3_rtc_s5: regulator-vcc3v3-rtc-s5 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vcc3v3_rtc_s5";
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
vin-supply = <&vcc_sys>;
|
|
};
|
|
|
|
vcc3v3_sata_pwren: vcc3v3-sata-pwren {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vcc3v3_satapm";
|
|
enable-active-high;
|
|
gpio = <&gpio4 RK_PC7 GPIO_ACTIVE_HIGH>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&satapm_pwren>;
|
|
};
|
|
|
|
vcc3v3_sd: regulator-vcc-3v3-sd {
|
|
compatible = "regulator-fixed";
|
|
enable-active-high;
|
|
gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&sdmmc_pwren>;
|
|
regulator-name = "vcc3v3_sd";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
vin-supply = <&vcc_3v3_s0>;
|
|
};
|
|
|
|
vcc5v0_device: regulator-vcc5v0-device {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vcc5v0_device";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
vin-supply = <&vcc12v_dcin>;
|
|
};
|
|
|
|
vcc_sys: regulator-vcc5v0-sys {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vcc_sys";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
vin-supply = <&vcc12v_dcin>;
|
|
};
|
|
|
|
vcc_1v1_nldo_s3: regulator-vcc-1v1-nldo-s3 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vcc_1v1_nldo_s3";
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
regulator-min-microvolt = <1100000>;
|
|
regulator-max-microvolt = <1100000>;
|
|
vin-supply = <&vcc_sys>;
|
|
};
|
|
|
|
vcc_1v8_s0: regulator-vcc-1v8-s0 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vcc_1v8_s0";
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
vin-supply = <&vcc_1v8_s3>;
|
|
};
|
|
|
|
vcc_2v0_pldo_s3: regulator-vcc-2v0-pldo-s3 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vcc_2v0_pldo_s3";
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
regulator-min-microvolt = <2000000>;
|
|
regulator-max-microvolt = <2000000>;
|
|
vin-supply = <&vcc_sys>;
|
|
};
|
|
|
|
vcc_3v3_s0: regulator-vcc-3v3-s0 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vcc_3v3_s0";
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
vin-supply = <&vcc_3v3_s3>;
|
|
};
|
|
|
|
vcc_ufs_s0: regulator-vcc-ufs-s0 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vcc_ufs_s0";
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
vin-supply = <&vcc_sys>;
|
|
};
|
|
};
|
|
|
|
&cpu_l0 {
|
|
cpu-supply = <&vdd_cpu_lit_s0>;
|
|
};
|
|
|
|
&cpu_l1 {
|
|
cpu-supply = <&vdd_cpu_lit_s0>;
|
|
};
|
|
|
|
&cpu_l2 {
|
|
cpu-supply = <&vdd_cpu_lit_s0>;
|
|
};
|
|
|
|
&cpu_l3 {
|
|
cpu-supply = <&vdd_cpu_lit_s0>;
|
|
};
|
|
|
|
&cpu_b0 {
|
|
cpu-supply = <&vdd_cpu_big_s0>;
|
|
};
|
|
|
|
&cpu_b1 {
|
|
cpu-supply = <&vdd_cpu_big_s0>;
|
|
};
|
|
|
|
&cpu_b2 {
|
|
cpu-supply = <&vdd_cpu_big_s0>;
|
|
};
|
|
|
|
&cpu_b3 {
|
|
cpu-supply = <&vdd_cpu_big_s0>;
|
|
};
|
|
|
|
&combphy0_ps {
|
|
status = "okay";
|
|
};
|
|
|
|
&combphy1_psu {
|
|
status = "okay";
|
|
};
|
|
|
|
&dp {
|
|
pinctrl-0 = <&dpm0_pins>;
|
|
pinctrl-names = "default";
|
|
status = "okay";
|
|
};
|
|
|
|
&dp0_in {
|
|
dp0_in_vp1: endpoint {
|
|
remote-endpoint = <&vp1_out_dp0>;
|
|
};
|
|
};
|
|
|
|
&dp0_out {
|
|
dp0_out_con: endpoint {
|
|
remote-endpoint = <&dp0_con_in>;
|
|
};
|
|
};
|
|
|
|
&gmac0 {
|
|
clock_in_out = "output";
|
|
phy-mode = "rgmii-id";
|
|
phy-handle = <&rgmii_phy0>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <ð0m1_miim
|
|
ð0m1_tx_bus2
|
|
ð0m1_rx_bus2
|
|
ð0m1_rgmii_clk
|
|
ð0m1_rgmii_bus>;
|
|
status = "okay";
|
|
};
|
|
|
|
&gmac1 {
|
|
clock_in_out = "output";
|
|
phy-handle = <&rgmii_phy1>;
|
|
phy-mode = "rgmii-id";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <ð1m0_miim
|
|
ð1m0_tx_bus2
|
|
ð1m0_rx_bus2
|
|
ð1m0_rgmii_clk
|
|
ð1m0_rgmii_bus>;
|
|
status = "okay";
|
|
};
|
|
|
|
&gpu {
|
|
mali-supply = <&vdd_gpu_s0>;
|
|
status = "okay";
|
|
};
|
|
|
|
&hdmi {
|
|
frl-enable-gpios = <&gpio4 RK_PC6 GPIO_ACTIVE_LOW>;
|
|
pinctrl-0 = <&hdmi_txm0_pins &hdmi_tx_scl &hdmi_tx_sda &hdmi_tx_on_h>;
|
|
pinctrl-names = "default";
|
|
status = "okay";
|
|
};
|
|
|
|
&hdmi_in {
|
|
hdmi_in_vp0: endpoint {
|
|
remote-endpoint = <&vp0_out_hdmi>;
|
|
};
|
|
};
|
|
|
|
&hdmi_out {
|
|
hdmi_out_con: endpoint {
|
|
remote-endpoint = <&hdmi_con_in>;
|
|
};
|
|
};
|
|
|
|
&hdmi_sound {
|
|
status = "okay";
|
|
};
|
|
|
|
&hdptxphy {
|
|
status = "okay";
|
|
};
|
|
|
|
&i2c1 {
|
|
status = "okay";
|
|
|
|
rk806: pmic@23 {
|
|
compatible = "rockchip,rk806";
|
|
reg = <0x23>;
|
|
interrupt-parent = <&gpio0>;
|
|
interrupts = <6 IRQ_TYPE_LEVEL_LOW>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>,
|
|
<&rk806_dvs2_null>, <&rk806_dvs3_null>;
|
|
system-power-controller;
|
|
|
|
vcc1-supply = <&vcc_sys>;
|
|
vcc2-supply = <&vcc_sys>;
|
|
vcc3-supply = <&vcc_sys>;
|
|
vcc4-supply = <&vcc_sys>;
|
|
vcc5-supply = <&vcc_sys>;
|
|
vcc6-supply = <&vcc_sys>;
|
|
vcc7-supply = <&vcc_sys>;
|
|
vcc8-supply = <&vcc_sys>;
|
|
vcc9-supply = <&vcc_sys>;
|
|
vcc10-supply = <&vcc_sys>;
|
|
vcc11-supply = <&vcc_2v0_pldo_s3>;
|
|
vcc12-supply = <&vcc_sys>;
|
|
vcc13-supply = <&vcc_1v1_nldo_s3>;
|
|
vcc14-supply = <&vcc_1v1_nldo_s3>;
|
|
vcca-supply = <&vcc_sys>;
|
|
|
|
rk806_dvs1_null: dvs1-null-pins {
|
|
pins = "gpio_pwrctrl1";
|
|
function = "pin_fun0";
|
|
};
|
|
|
|
rk806_dvs2_null: dvs2-null-pins {
|
|
pins = "gpio_pwrctrl2";
|
|
function = "pin_fun0";
|
|
};
|
|
|
|
rk806_dvs3_null: dvs3-null-pins {
|
|
pins = "gpio_pwrctrl3";
|
|
function = "pin_fun0";
|
|
};
|
|
|
|
rk806_dvs1_slp: dvs1-slp-pins {
|
|
pins = "gpio_pwrctrl1";
|
|
function = "pin_fun1";
|
|
};
|
|
|
|
rk806_dvs1_pwrdn: dvs1-pwrdn-pins {
|
|
pins = "gpio_pwrctrl1";
|
|
function = "pin_fun2";
|
|
};
|
|
|
|
rk806_dvs1_rst: dvs1-rst-pins {
|
|
pins = "gpio_pwrctrl1";
|
|
function = "pin_fun3";
|
|
};
|
|
|
|
rk806_dvs2_slp: dvs2-slp-pins {
|
|
pins = "gpio_pwrctrl2";
|
|
function = "pin_fun1";
|
|
};
|
|
|
|
rk806_dvs2_pwrdn: dvs2-pwrdn-pins {
|
|
pins = "gpio_pwrctrl2";
|
|
function = "pin_fun2";
|
|
};
|
|
|
|
rk806_dvs2_rst: dvs2-rst-pins {
|
|
pins = "gpio_pwrctrl2";
|
|
function = "pin_fun3";
|
|
};
|
|
|
|
rk806_dvs2_dvs: dvs2-dvs-pins {
|
|
pins = "gpio_pwrctrl2";
|
|
function = "pin_fun4";
|
|
};
|
|
|
|
rk806_dvs2_gpio: dvs2-gpio-pins {
|
|
pins = "gpio_pwrctrl2";
|
|
function = "pin_fun5";
|
|
};
|
|
|
|
rk806_dvs3_slp: dvs3-slp-pins {
|
|
pins = "gpio_pwrctrl3";
|
|
function = "pin_fun1";
|
|
};
|
|
|
|
rk806_dvs3_pwrdn: dvs3-pwrdn-pins {
|
|
pins = "gpio_pwrctrl3";
|
|
function = "pin_fun2";
|
|
};
|
|
|
|
rk806_dvs3_rst: dvs3-rst-pins {
|
|
pins = "gpio_pwrctrl3";
|
|
function = "pin_fun3";
|
|
};
|
|
|
|
rk806_dvs3_dvs: dvs3-dvs-pins {
|
|
pins = "gpio_pwrctrl3";
|
|
function = "pin_fun4";
|
|
};
|
|
|
|
rk806_dvs3_gpio: dvs3-gpio-pins {
|
|
pins = "gpio_pwrctrl3";
|
|
function = "pin_fun5";
|
|
};
|
|
|
|
regulators {
|
|
vdd_cpu_big_s0: dcdc-reg1 {
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <550000>;
|
|
regulator-max-microvolt = <950000>;
|
|
regulator-ramp-delay = <12500>;
|
|
regulator-name = "vdd_cpu_big_s0";
|
|
regulator-enable-ramp-delay = <400>;
|
|
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
vdd_npu_s0: dcdc-reg2 {
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <550000>;
|
|
regulator-max-microvolt = <950000>;
|
|
regulator-ramp-delay = <12500>;
|
|
regulator-name = "vdd_npu_s0";
|
|
regulator-enable-ramp-delay = <400>;
|
|
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
vdd_cpu_lit_s0: dcdc-reg3 {
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <550000>;
|
|
regulator-max-microvolt = <950000>;
|
|
regulator-ramp-delay = <12500>;
|
|
regulator-name = "vdd_cpu_lit_s0";
|
|
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
regulator-suspend-microvolt = <750000>;
|
|
};
|
|
};
|
|
|
|
vcc_3v3_s3: dcdc-reg4 {
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-name = "vcc_3v3_s3";
|
|
|
|
regulator-state-mem {
|
|
regulator-on-in-suspend;
|
|
regulator-suspend-microvolt = <3300000>;
|
|
};
|
|
};
|
|
|
|
vdd_gpu_s0: dcdc-reg5 {
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <550000>;
|
|
regulator-max-microvolt = <900000>;
|
|
regulator-ramp-delay = <12500>;
|
|
regulator-name = "vdd_gpu_s0";
|
|
regulator-enable-ramp-delay = <400>;
|
|
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
regulator-suspend-microvolt = <850000>;
|
|
};
|
|
};
|
|
|
|
vddq_ddr_s0: dcdc-reg6 {
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-name = "vddq_ddr_s0";
|
|
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
vdd_logic_s0: dcdc-reg7 {
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <550000>;
|
|
regulator-max-microvolt = <800000>;
|
|
regulator-name = "vdd_logic_s0";
|
|
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
vcc_1v8_s3: dcdc-reg8 {
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-name = "vcc_1v8_s3";
|
|
|
|
regulator-state-mem {
|
|
regulator-on-in-suspend;
|
|
regulator-suspend-microvolt = <1800000>;
|
|
};
|
|
};
|
|
|
|
vdd2_ddr_s3: dcdc-reg9 {
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-name = "vdd2_ddr_s3";
|
|
|
|
regulator-state-mem {
|
|
regulator-on-in-suspend;
|
|
};
|
|
};
|
|
|
|
vdd_ddr_s0: dcdc-reg10 {
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <550000>;
|
|
regulator-max-microvolt = <1200000>;
|
|
regulator-name = "vdd_ddr_s0";
|
|
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
vcca_1v8_s0: pldo-reg1 {
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-name = "vcca_1v8_s0";
|
|
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
vcca1v8_pldo2_s0: pldo-reg2 {
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-name = "vcca1v8_pldo2_s0";
|
|
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
vdda_1v2_s0: pldo-reg3 {
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <1200000>;
|
|
regulator-max-microvolt = <1200000>;
|
|
regulator-name = "vdda_1v2_s0";
|
|
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
vcca_3v3_s0: pldo-reg4 {
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-name = "vcca_3v3_s0";
|
|
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
vccio_sd_s0: pldo-reg5 {
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-name = "vccio_sd_s0";
|
|
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
vcca1v8_pldo6_s3: pldo-reg6 {
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-name = "vcca1v8_pldo6_s3";
|
|
|
|
regulator-state-mem {
|
|
regulator-on-in-suspend;
|
|
regulator-suspend-microvolt = <1800000>;
|
|
};
|
|
};
|
|
|
|
vdd_0v75_s3: nldo-reg1 {
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <550000>;
|
|
regulator-max-microvolt = <750000>;
|
|
regulator-name = "vdd_0v75_s3";
|
|
|
|
regulator-state-mem {
|
|
regulator-on-in-suspend;
|
|
regulator-suspend-microvolt = <750000>;
|
|
};
|
|
};
|
|
|
|
vdda_ddr_pll_s0: nldo-reg2 {
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <850000>;
|
|
regulator-max-microvolt = <850000>;
|
|
regulator-name = "vdda_ddr_pll_s0";
|
|
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
vdda0v75_hdmi_s0: nldo-reg3 {
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <837500>;
|
|
regulator-max-microvolt = <837500>;
|
|
regulator-name = "vdda0v75_hdmi_s0";
|
|
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
vdda_0v85_s0: nldo-reg4 {
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <850000>;
|
|
regulator-max-microvolt = <850000>;
|
|
regulator-name = "vdda_0v85_s0";
|
|
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
vdda_0v75_s0: nldo-reg5 {
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <750000>;
|
|
regulator-max-microvolt = <750000>;
|
|
regulator-name = "vdda_0v75_s0";
|
|
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&i2c2 {
|
|
status = "okay";
|
|
|
|
hym8563: rtc@51 {
|
|
compatible = "haoyu,hym8563";
|
|
reg = <0x51>;
|
|
clock-output-names = "hym8563";
|
|
interrupt-parent = <&gpio0>;
|
|
interrupts = <RK_PA5 IRQ_TYPE_LEVEL_LOW>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&rtc_int>;
|
|
wakeup-source;
|
|
#clock-cells = <0>;
|
|
};
|
|
};
|
|
|
|
&mdio0 {
|
|
rgmii_phy0: ethernet-phy@1 {
|
|
compatible = "ethernet-phy-ieee802.3-c22";
|
|
reg = <0x1>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&rgmii_phy0_rst>;
|
|
reset-assert-us = <20000>;
|
|
reset-deassert-us = <100000>;
|
|
reset-gpios = <&gpio3 RK_PD3 GPIO_ACTIVE_LOW>;
|
|
};
|
|
};
|
|
|
|
&mdio1 {
|
|
rgmii_phy1: ethernet-phy@1 {
|
|
compatible = "ethernet-phy-ieee802.3-c22";
|
|
reg = <0x1>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&rgmii_phy1_rst>;
|
|
reset-assert-us = <20000>;
|
|
reset-deassert-us = <100000>;
|
|
reset-gpios = <&gpio3 RK_PD6 GPIO_ACTIVE_LOW>;
|
|
};
|
|
};
|
|
|
|
&pinctrl {
|
|
bluetooth {
|
|
bt_reg_on: bt-reg-on {
|
|
rockchip,pins = <1 RK_PC7 RK_FUNC_GPIO &pcfg_pull_up>;
|
|
};
|
|
|
|
bt_wake_host: bt-wake-host {
|
|
rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_down>;
|
|
};
|
|
|
|
host_wake_bt: host-wake-bt {
|
|
rockchip,pins = <1 RK_PD4 RK_FUNC_GPIO &pcfg_pull_up>;
|
|
};
|
|
};
|
|
|
|
dp {
|
|
image_pwren: image-pwren {
|
|
rockchip,pins = <0 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
};
|
|
|
|
hdmi {
|
|
hdmi_tx_on_h: hdmi-tx-on-h {
|
|
rockchip,pins = <4 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
};
|
|
|
|
hym8563 {
|
|
rtc_int: rtc-int {
|
|
rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
|
|
};
|
|
};
|
|
|
|
network {
|
|
rgmii_phy0_rst: rgmii-phy0-rst {
|
|
rockchip,pins = <3 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
|
|
rgmii_phy1_rst: rgmii-phy1-rst {
|
|
rockchip,pins = <3 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
};
|
|
|
|
pcie1 {
|
|
pcie1_rst: pcie1-rst {
|
|
rockchip,pins = <4 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
};
|
|
|
|
sata {
|
|
satapm_pwren: satapm-pwren {
|
|
rockchip,pins = <4 RK_PC7 RK_FUNC_GPIO &pcfg_output_high>;
|
|
};
|
|
};
|
|
|
|
sdmmc {
|
|
sdmmc_pwren: sdmmc-pwren {
|
|
rockchip,pins = <0 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
};
|
|
|
|
usb {
|
|
usb_host_pwren: usb-host-pwren {
|
|
rockchip,pins = <0 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
|
|
usb_hub_reset: usb-hub-reset {
|
|
rockchip,pins = <0 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
|
|
usb_otg0_pwren: usb-otg0-pwren {
|
|
rockchip,pins = <0 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
};
|
|
|
|
wifi {
|
|
wifi_host_wake: wifi-host-wake {
|
|
rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_down>;
|
|
};
|
|
|
|
wifi_pwren: wifi-pwren {
|
|
rockchip,pins = <1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_up>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&sai6 {
|
|
status = "okay";
|
|
};
|
|
|
|
&saradc {
|
|
vref-supply = <&vcca_1v8_s0>;
|
|
status = "okay";
|
|
};
|
|
|
|
&sata0 {
|
|
target-supply = <&vcc3v3_sata_pwren>;
|
|
status = "okay";
|
|
};
|
|
|
|
&sdio {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
bus-width = <4>;
|
|
cap-sd-highspeed;
|
|
cap-sdio-irq;
|
|
keep-power-in-suspend;
|
|
max-frequency = <150000000>;
|
|
mmc-pwrseq = <&sdio_pwrseq>;
|
|
no-sd;
|
|
no-mmc;
|
|
non-removable;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&sdmmc1m0_bus4 &sdmmc1m0_clk &sdmmc1m0_cmd>;
|
|
sd-uhs-sdr104;
|
|
status = "okay";
|
|
|
|
brcmf: wifi@1 {
|
|
compatible = "brcm,bcm4329-fmac";
|
|
reg = <1>;
|
|
interrupt-parent = <&gpio0>;
|
|
interrupts = <RK_PB0 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-names = "host-wake";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&wifi_host_wake>;
|
|
};
|
|
};
|
|
|
|
&sdhci {
|
|
bus-width = <8>;
|
|
full-pwr-cycle-in-suspend;
|
|
mmc-hs400-1_8v;
|
|
mmc-hs400-enhanced-strobe;
|
|
no-sdio;
|
|
no-sd;
|
|
non-removable;
|
|
status = "okay";
|
|
};
|
|
|
|
&sdmmc {
|
|
bus-width = <4>;
|
|
cap-sd-highspeed;
|
|
cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>;
|
|
disable-wp;
|
|
no-sdio;
|
|
no-mmc;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&sdmmc0_clk &sdmmc0_cmd &sdmmc0_det &sdmmc0_bus4>;
|
|
sd-uhs-sdr104;
|
|
vmmc-supply = <&vcc3v3_sd>;
|
|
vqmmc-supply = <&vccio_sd_s0>;
|
|
status = "okay";
|
|
};
|
|
|
|
&u2phy0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&u2phy0_otg {
|
|
phy-supply = <&vbus5v0_usb0>;
|
|
status = "okay";
|
|
};
|
|
|
|
&u2phy1 {
|
|
status = "okay";
|
|
};
|
|
|
|
&u2phy1_otg {
|
|
phy-supply = <&vbus5v0_usb1>;
|
|
status = "okay";
|
|
};
|
|
|
|
&uart0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&uart4 {
|
|
pinctrl-0 = <&uart4m1_xfer &uart4m1_ctsn &uart4m1_rtsn>;
|
|
pinctrl-names = "default";
|
|
uart-has-rtscts;
|
|
status = "okay";
|
|
|
|
bluetooth {
|
|
compatible = "brcm,bcm43438-bt";
|
|
clocks = <&hym8563>;
|
|
clock-names = "lpo";
|
|
device-wakeup-gpios = <&gpio1 RK_PD4 GPIO_ACTIVE_HIGH>;
|
|
interrupt-parent = <&gpio0>;
|
|
interrupts = <RK_PB1 IRQ_TYPE_LEVEL_HIGH>;
|
|
pinctrl-0 = <&bt_reg_on &bt_wake_host &host_wake_bt>;
|
|
pinctrl-names = "default";
|
|
shutdown-gpios = <&gpio1 RK_PC7 GPIO_ACTIVE_HIGH>;
|
|
vbat-supply = <&vcc_3v3_s3>;
|
|
vddio-supply = <&vcc_1v8_s3>;
|
|
};
|
|
};
|
|
|
|
&ufshc {
|
|
vcc-supply = <&vcc_ufs_s0>;
|
|
vccq-supply = <&vcc1v2_ufs_vccq_s0>;
|
|
vccq2-supply = <&vcc1v8_ufs_vccq2_s0>;
|
|
status = "okay";
|
|
};
|
|
|
|
&usbdp_phy {
|
|
rockchip,dp-lane-mux = <2 3>;
|
|
status = "okay";
|
|
};
|
|
|
|
&usb_drd0_dwc3 {
|
|
dr_mode = "otg";
|
|
extcon = <&u2phy0>;
|
|
status = "okay";
|
|
};
|
|
|
|
&usb_drd1_dwc3 {
|
|
dr_mode = "host";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&usb_hub_reset>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
status = "okay";
|
|
|
|
hub_2_0: hub@1 {
|
|
compatible = "usb1a86,8091";
|
|
reg = <1>;
|
|
reset-gpios = <&gpio0 RK_PC5 GPIO_ACTIVE_LOW>;
|
|
v5-supply = <&vcc_3v3_s0>;
|
|
vdd33-supply = <&vcc_3v3_s0>;
|
|
};
|
|
};
|
|
|
|
&vop {
|
|
/*
|
|
* If no dedicated PLL was specified, the GPLL would be automatically
|
|
* assigned as the PLL source for dclk_vp1_src. As the frequency of GPLL
|
|
* is 1188 MHz, we can only get typical clock frequencies such as
|
|
* 74.25MHz, 148.5MHz, 297MHz, 594MHz.
|
|
*
|
|
* So here we set the parent clock of VP1 to VPLL so that we can get
|
|
* any frequency.
|
|
*/
|
|
assigned-clocks = <&cru DCLK_VP1_SRC>;
|
|
assigned-clock-parents = <&cru PLL_VPLL>;
|
|
status = "okay";
|
|
};
|
|
|
|
&vop_mmu {
|
|
status = "okay";
|
|
};
|
|
|
|
&vp0 {
|
|
vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
|
|
reg = <ROCKCHIP_VOP2_EP_HDMI0>;
|
|
remote-endpoint = <&hdmi_in_vp0>;
|
|
};
|
|
};
|
|
|
|
&vp1 {
|
|
vp1_out_dp0: endpoint@a {
|
|
reg = <ROCKCHIP_VOP2_EP_DP0>;
|
|
remote-endpoint = <&dp0_in_vp1>;
|
|
};
|
|
};
|