lastdragon/linux-kernel
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
Files
ad2088d178afb6207a6760fb70142d87f48aeda4
linux-kernel/linux-7.2.3/arch/arm64/boot/dts/mediatek/mt8390-tungsten-smarc.dtsi
T
lastdragon ad2088d178 Resguardo inicial
2026-09-06 12:53:21 -06:00

1606 lines
31 KiB
Devicetree
Raw Blame History

// SPDX-License-Identifier: (GPL-2.0 OR MIT)
/*
* Copyright (C) 2025 Ezurio LLC
* Author: Gary Bisson <bisson.gary@gmail.com>
*/
#include "mt6359.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/input/linux-event-codes.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/net/microchip-lan78xx.h>
#include <dt-bindings/pinctrl/mediatek,mt8188-pinfunc.h>
#include <dt-bindings/spmi/spmi.h>
#include <dt-bindings/usb/pd.h>
/ {
aliases {
dsi0 = &disp_dsi0;
ethernet0 = &eth;
i2c0 = &i2c0;
i2c1 = &i2c1;
i2c2 = &i2c2;
i2c3 = &i2c3;
i2c4 = &i2c4;
i2c5 = &i2c5;
i2c6 = &i2c6;
mmc0 = &mmc0;
mmc1 = &mmc1;
mmc2 = &mmc2;
rtc0 = &rv3028;
rtc1 = &mt6359rtc;
serial0 = &uart0;
};
backlight_lcd0: backlight-lcd0 {
compatible = "pwm-backlight";
brightness-levels = <0 1023>;
default-brightness-level = <768>;
num-interpolated-steps = <1023>;
enable-gpios = <&pio 30 GPIO_ACTIVE_HIGH>;
pwms = <&disp_pwm0 0 30000>;
};
chosen {
stdout-path = "serial0:115200n8";
};
connector {
compatible = "hdmi-connector";
label = "hdmi";
type = "a";
ddc-i2c-bus = <&hdmi_ddc>;
hdmi-pwr-supply = <&hdmi_phy>;
port {
hdmi_connector_in: endpoint {
remote-endpoint = <&hdmi0_out>;
};
};
};
firmware {
optee {
compatible = "linaro,optee-tz";
method = "smc";
};
};
memory@40000000 {
device_type = "memory";
reg = <0 0x40000000 0x1 0x00000000>;
};
panel-dsi0 {
compatible = "tianma,tm070jdhg30";
backlight = <&backlight_lcd0>;
power-supply = <&reg_5v>;
port {
dsi0_panel_in: endpoint {
remote-endpoint = <&sn65dsi84_bridge_out>;
};
};
};
reserved-memory {
#address-cells = <2>;
#size-cells = <2>;
ranges;
/*
* 12 MiB reserved for OP-TEE (BL32)
* +-----------------------+ 0x43e0_0000
* | SHMEM 2MiB |
* +-----------------------+ 0x43c0_0000
* | | TA_RAM 8MiB |
* + TZDRAM +--------------+ 0x4340_0000
* | | TEE_RAM 2MiB |
* +-----------------------+ 0x4320_0000
*/
optee_reserved: optee@43200000 {
no-map;
reg = <0 0x43200000 0 0x00c00000>;
};
scp_mem: memory@50000000 {
compatible = "shared-dma-pool";
reg = <0 0x50000000 0 0x2900000>;
no-map;
};
/* 2 MiB reserved for ARM Trusted Firmware (BL31) */
bl31_secmon_reserved: memory@54600000 {
no-map;
reg = <0 0x54600000 0x0 0x200000>;
};
apu_mem: memory@55000000 {
compatible = "shared-dma-pool";
reg = <0 0x55000000 0 0x1400000>; /* 20 MB */
};
vpu_mem: memory@57000000 {
compatible = "shared-dma-pool";
reg = <0 0x57000000 0 0x1400000>; /* 20 MB */
};
adsp_mem: memory@60000000 {
compatible = "shared-dma-pool";
reg = <0 0x60000000 0 0xf00000>;
no-map;
};
afe_dma_mem: memory@60f00000 {
compatible = "shared-dma-pool";
reg = <0 0x60f00000 0 0x100000>;
no-map;
};
adsp_dma_mem: memory@61000000 {
compatible = "shared-dma-pool";
reg = <0 0x61000000 0 0x100000>;
no-map;
};
};
regulator-efuse {
compatible = "regulator-output";
vout-supply = <&mt6359_vefuse_ldo_reg>;
};
reg_1v8: regulator-1v8 {
compatible = "regulator-fixed";
regulator-name = "reg_1v8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
};
reg_3v3: regulator-3v3 {
compatible = "regulator-fixed";
regulator-name = "reg_3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
reg_5v: regulator-5v {
compatible = "regulator-fixed";
regulator-name = "reg_5v";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-always-on;
};
sdcard_en_3v3: regulator-sdcard-en {
compatible = "regulator-fixed";
regulator-always-on;
regulator-name = "sdcard_en_3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&pio 111 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
usb_p0_vbus: regulator-usb-p0-vbus {
compatible = "regulator-fixed";
regulator-name = "vbus_p0";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&pio 84 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
usb_p1_vbus: regulator-usb-p1-vbus {
compatible = "regulator-fixed";
pinctrl-names = "default";
pinctrl-0 = <&usb1_hub_pins>;
regulator-name = "vbus_p1";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
gpio = <&pio 147 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
usb_p2_vbus: regulator-usb-p2-vbus {
compatible = "regulator-fixed";
pinctrl-names = "default";
pinctrl-0 = <&usb2_eth_pins>;
regulator-name = "vbus_p2";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
gpio = <&pio 80 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
wifi_pwrseq: wifi-pwrseq {
compatible = "mmc-pwrseq-simple";
pinctrl-names = "default";
pinctrl-0 = <&wifi_pwrseq_pins>;
post-power-on-delay-ms = <200>;
reset-gpios = <&pio 89 GPIO_ACTIVE_LOW>;
};
};
&adsp {
memory-region = <&adsp_dma_mem>, <&adsp_mem>;
status = "okay";
};
&afe {
memory-region = <&afe_dma_mem>;
status = "okay";
};
&cpu0 {
cpu-supply = <&mt6359_vcore_buck_reg>;
};
&cpu1 {
cpu-supply = <&mt6359_vcore_buck_reg>;
};
&cpu2 {
cpu-supply = <&mt6359_vcore_buck_reg>;
};
&cpu3 {
cpu-supply = <&mt6359_vcore_buck_reg>;
};
&cpu6 {
cpu-supply = <&mt6315_6_vbuck1>;
};
&cpu7 {
cpu-supply = <&mt6315_6_vbuck1>;
};
&disp_pwm0 {
pinctrl-names = "default";
pinctrl-0 = <&disp_pwm0_pins>;
status = "okay";
};
&disp_dsi0 {
#address-cells = <1>;
#size-cells = <0>;
status = "okay";
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
dsi0_in: endpoint {
remote-endpoint = <&dither0_out>;
};
};
port@1 {
reg = <1>;
dsi0_out: endpoint {
remote-endpoint = <&sn65dsi84_bridge_in>;
};
};
};
};
&dither0_in {
remote-endpoint = <&postmask0_out>;
};
&dither0_out {
remote-endpoint = <&dsi0_in>;
};
&dpi1 {
status = "okay";
};
&dpi1_in {
remote-endpoint = <&merge5_out>;
};
&dpi1_out {
remote-endpoint = <&hdmi0_in>;
};
&eth {
phy-mode ="rgmii-id";
phy-handle = <&ethernet_phy0>;
pinctrl-names = "default", "sleep";
pinctrl-0 = <&eth_default_pins>;
pinctrl-1 = <&eth_sleep_pins>;
mediatek,mac-wol;
snps,reset-gpio = <&pio 27 GPIO_ACTIVE_LOW>;
snps,reset-active-low;
snps,reset-delays-us = <0 11000 1000>;
status = "okay";
};
&eth_mdio {
ethernet_phy0: ethernet-phy@7 {
compatible = "ethernet-phy-ieee802.3-c22";
reg = <0x7>;
interrupts-extended = <&pio 148 IRQ_TYPE_LEVEL_LOW>;
};
};
&ethdr0 {
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
ethdr0_in: endpoint@1 {
reg = <1>;
remote-endpoint = <&vdosys1_ep_ext>;
};
};
port@1 {
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
ethdr0_out: endpoint@1 {
reg = <1>;
remote-endpoint = <&merge5_in>;
};
};
};
};
&gamma0_out {
remote-endpoint = <&postmask0_in>;
};
&gpu {
mali-supply = <&mt6359_vproc2_buck_reg>;
status = "okay";
};
&hdmi {
pinctrl-names = "default";
pinctrl-0 = <&hdmi_pins>;
status = "okay";
};
&hdmi0_in {
remote-endpoint = <&dpi1_out>;
};
&hdmi0_out {
remote-endpoint = <&hdmi_connector_in>;
};
&hdmi_phy {
pinctrl-names = "default";
pinctrl-0 = <&hdmi_vreg_pins>;
status = "okay";
};
&i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins>;
clock-frequency = <100000>;
status = "okay";
i2c-mux@73 {
compatible = "nxp,pca9546";
reg = <0x73>;
pinctrl-names = "default";
pinctrl-0 = <&i2c0_mux_pins>;
reset-gpios = <&pio 6 GPIO_ACTIVE_LOW>;
#address-cells = <1>;
#size-cells = <0>;
i2c_mux_gp_0: i2c@0 {
reg = <0>;
clock-frequency = <100000>;
#address-cells = <1>;
#size-cells = <0>;
};
i2c_mux_gp_1: i2c@1 {
reg = <1>;
clock-frequency = <100000>;
#address-cells = <1>;
#size-cells = <0>;
};
i2c_mux_gp_2: i2c@2 {
reg = <2>;
clock-frequency = <100000>;
#address-cells = <1>;
#size-cells = <0>;
};
i2c_mux_gp_3: i2c@3 {
reg = <3>;
clock-frequency = <100000>;
#address-cells = <1>;
#size-cells = <0>;
};
};
};
&i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&i2c1_pins>;
clock-frequency = <400000>;
status = "okay";
};
&i2c2 {
pinctrl-names = "default";
pinctrl-0 = <&i2c2_pins>;
clock-frequency = <400000>;
status = "okay";
i2c-mux@73 {
compatible = "nxp,pca9546";
reg = <0x73>;
pinctrl-names = "default";
pinctrl-0 = <&i2c_mux_smarc_lcd_pins>;
reset-gpios = <&pio 5 GPIO_ACTIVE_LOW>;
#address-cells = <1>;
#size-cells = <0>;
i2c_mux_lcd_0: i2c@0 {
reg = <0>;
clock-frequency = <100000>;
#address-cells = <1>;
#size-cells = <0>;
};
i2c_mux_lcd_1: i2c@1 {
reg = <1>;
clock-frequency = <100000>;
#address-cells = <1>;
#size-cells = <0>;
};
i2c_mux_lcd_2: i2c@2 {
reg = <2>;
clock-frequency = <100000>;
#address-cells = <1>;
#size-cells = <0>;
};
i2c_mux_lcd_3: i2c@3 {
reg = <3>;
clock-frequency = <100000>;
#address-cells = <1>;
#size-cells = <0>;
};
};
};
&i2c3 {
pinctrl-names = "default";
pinctrl-0 = <&i2c3_pins>;
clock-frequency = <400000>;
status = "okay";
};
&i2c4 {
pinctrl-names = "default";
pinctrl-0 = <&i2c4_pins>;
clock-frequency = <400000>;
status = "okay";
};
&i2c_mux_gp_0 {
rv3028: rtc@52 {
compatible = "microcrystal,rv3028";
reg = <0x52>;
interrupts-extended = <&pio 42 IRQ_TYPE_LEVEL_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&rv3028_pins>;
#clock-cells = <0>;
wakeup-source;
};
};
&i2c_mux_gp_1 {
usb-typec@60 {
compatible = "ti,hd3ss3220";
reg = <0x60>;
interrupts-extended = <&pio 45 IRQ_TYPE_LEVEL_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&hd3ss3220_pins>;
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
hd3ss3220_in_ep: endpoint {
remote-endpoint = <&ss_ep>;
};
};
port@1 {
reg = <1>;
hd3ss3220_out_ep: endpoint {
remote-endpoint = <&usb_role_switch>;
};
};
};
};
};
&i2c_mux_gp_2 {
codec@1a {
compatible = "wlf,wm8962";
reg = <0x1a>;
clocks = <&topckgen CLK_TOP_I2SO1>;
AVDD-supply = <&reg_1v8>;
CPVDD-supply = <&reg_1v8>;
DBVDD-supply = <&reg_3v3>;
DCVDD-supply = <&reg_1v8>;
MICVDD-supply = <&reg_3v3>;
PLLVDD-supply = <&reg_1v8>;
SPKVDD1-supply = <&reg_5v>;
SPKVDD2-supply = <&reg_5v>;
gpio-cfg = <
0x0000 /* n/c */
0x0000 /* gpio2: */
0x0000 /* gpio3: */
0x0000 /* n/c */
0x8081 /* gpio5:HP detect */
0x8095 /* gpio6:Mic detect */
>;
};
};
&i2c_mux_lcd_2 {
bridge@2c {
compatible = "ti,sn65dsi84";
reg = <0x2c>;
pinctrl-names = "default";
pinctrl-0 = <&dsi0_sn65dsi84_pins>;
enable-gpios = <&pio 25 GPIO_ACTIVE_HIGH>;
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
sn65dsi84_bridge_in: endpoint {
remote-endpoint = <&dsi0_out>;
data-lanes = <1 2 3 4>;
};
};
port@2 {
reg = <2>;
sn65dsi84_bridge_out: endpoint {
remote-endpoint = <&dsi0_panel_in>;
};
};
};
};
touchscren@5d {
compatible = "goodix,gt911";
reg = <0x5d>;
pinctrl-names = "default";
pinctrl-0 = <&ts_dsi0_goodix_pins>;
interrupts-extended = <&pio 146 IRQ_TYPE_LEVEL_HIGH>;
irq-gpios = <&pio 146 GPIO_ACTIVE_HIGH>;
reset-gpios = <&pio 7 GPIO_ACTIVE_HIGH>;
};
};
&merge5 {
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
merge5_in: endpoint@1 {
reg = <1>;
remote-endpoint = <&ethdr0_out>;
};
};
port@1 {
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
merge5_out: endpoint@1 {
reg = <1>;
remote-endpoint = <&dpi1_in>;
};
};
};
};
&mfg0 {
domain-supply = <&mt6359_vproc2_buck_reg>;
};
&mfg1 {
domain-supply = <&mt6359_vsram_others_ldo_reg>;
};
&mmc0 {
bus-width = <8>;
cap-mmc-highspeed;
cap-mmc-hw-reset;
hs400-ds-delay = <0x1481b>;
max-frequency = <200000000>;
mmc-hs200-1_8v;
mmc-hs400-1_8v;
non-removable;
no-sd;
no-sdio;
supports-cqe;
pinctrl-names = "default", "state_uhs";
pinctrl-0 = <&mmc0_default_pins>;
pinctrl-1 = <&mmc0_uhs_pins>;
vmmc-supply = <&mt6359_vemc_1_ldo_reg>;
vqmmc-supply = <&mt6359_vufs_ldo_reg>;
status = "okay";
};
&mmc1 {
bus-width = <4>;
cap-sd-highspeed;
max-frequency = <200000000>;
sd-uhs-sdr104;
sd-uhs-sdr50;
pinctrl-names = "default", "state_uhs";
pinctrl-0 = <&mmc1_default_pins>;
pinctrl-1 = <&mmc1_uhs_pins>;
cd-gpios = <&pio 2 GPIO_ACTIVE_LOW>;
vqmmc-supply = <&mt6359_vsim1_ldo_reg>;
vmmc-supply = <&sdcard_en_3v3>;
status = "okay";
};
&mmc2 {
bus-width = <4>;
cap-sd-highspeed;
cap-sdio-irq;
keep-power-in-suspend;
max-frequency = <200000000>;
no-mmc;
non-removable;
no-sd;
sd-uhs-sdr104;
wakeup-source;
pinctrl-names = "default", "state_uhs", "state_eint";
pinctrl-0 = <&mmc2_default_pins>;
pinctrl-1 = <&mmc2_uhs_pins>;
pinctrl-2 = <&mmc2_eint_pins>;
interrupt-names = "msdc", "sdio_wakeup";
interrupts-extended = <&gic GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH 0>,
<&pio 172 IRQ_TYPE_LEVEL_LOW>;
vmmc-supply = <&mt6359_vcn33_2_ldo_reg>;
vqmmc-supply = <&mt6359_vcn18_ldo_reg>;
mmc-pwrseq = <&wifi_pwrseq>;
status = "okay";
};
&mipi_tx_config0 {
status = "okay";
};
&mt6359codec {
mediatek,mic-type-0 = <1>;
mediatek,mic-type-1 = <3>;
};
&mt6359_vbbck_ldo_reg {
regulator-always-on;
};
&mt6359_vcn18_ldo_reg {
regulator-name = "vcn18_pmu";
regulator-always-on;
regulator-boot-on;
};
&mt6359_vcn33_1_ldo_reg {
regulator-name = "vcn33_1_pmu";
regulator-always-on;
};
&mt6359_vcn33_2_ldo_reg {
regulator-name = "vcn33_2_pmu";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
regulator-boot-on;
};
&mt6359_vcore_buck_reg {
regulator-name = "dvdd_proc_l";
regulator-always-on;
};
&mt6359_vemc_1_ldo_reg {
regulator-always-on;
};
&mt6359_vgpu11_buck_reg {
regulator-name = "dvdd_core";
regulator-always-on;
};
&mt6359_vmodem_buck_reg {
regulator-always-on;
};
&mt6359_vpa_buck_reg {
regulator-name = "vpa_pmu";
regulator-always-on;
};
&mt6359_vproc2_buck_reg {
/* The name "vgpu" is required by mtk-regulator-coupler */
regulator-name = "vgpu";
regulator-min-microvolt = <550000>;
regulator-max-microvolt = <800000>;
regulator-coupled-with = <&mt6359_vsram_others_ldo_reg>;
regulator-coupled-max-spread = <225000>;
};
&mt6359_vs2_buck_reg {
regulator-min-microvolt = <1600000>;
regulator-boot-on;
};
&mt6359_vpu_buck_reg {
regulator-name = "dvdd_adsp";
regulator-always-on;
};
&mt6359_vrf12_ldo_reg {
regulator-name = "va12_abb2_pmu";
regulator-always-on;
};
&mt6359_vsram_md_ldo_reg {
regulator-always-on;
};
&mt6359_vsram_others_ldo_reg {
/* The name "vsram_gpu" is required by mtk-regulator-coupler */
regulator-name = "vsram_gpu";
regulator-min-microvolt = <750000>;
regulator-max-microvolt = <800000>;
regulator-coupled-with = <&mt6359_vproc2_buck_reg>;
regulator-coupled-max-spread = <225000>;
};
&mt6359_vsim1_ldo_reg {
regulator-name = "vsim1_pmu";
regulator-max-microvolt = <1800000>;
regulator-enable-ramp-delay = <480>;
};
&mt6359_vufs_ldo_reg {
regulator-name = "vufs18_pmu";
regulator-always-on;
};
&ovl0_in {
remote-endpoint = <&vdosys0_ep_main>;
};
&pcie {
pinctrl-names = "default";
pinctrl-0 = <&pcie_default_pins>;
status = "okay";
};
&pciephy {
status = "okay";
};
&pmic {
interrupts-extended = <&pio 222 IRQ_TYPE_LEVEL_HIGH>;
keys {
compatible = "mediatek,mt6359-keys";
mediatek,long-press-mode = <1>;
power-off-time-sec = <0>;
power-key {
linux,keycodes = <KEY_POWER>;
wakeup-source;
};
};
};
&postmask0_in {
remote-endpoint = <&gamma0_out>;
};
&postmask0_out {
remote-endpoint = <&dither0_in>;
};
&scp_cluster {
status = "okay";
};
&scp_c0 {
memory-region = <&scp_mem>;
status = "okay";
};
&spi0 {
pinctrl-0 = <&spi0_pins>;
pinctrl-names = "default";
mediatek,pad-select = <0>;
status = "okay";
};
&spi1 {
pinctrl-0 = <&spi1_pins>;
pinctrl-names = "default";
mediatek,pad-select = <0>;
status = "okay";
};
&spmi {
#address-cells = <2>;
#size-cells = <0>;
mt6315_6: pmic@6 {
compatible = "mediatek,mt6315-regulator";
reg = <0x6 SPMI_USID>;
regulators {
mt6315_6_vbuck1: vbuck1 {
regulator-name = "vbuck1";
regulator-min-microvolt = <300000>;
regulator-max-microvolt = <1193750>;
regulator-enable-ramp-delay = <256>;
regulator-allowed-modes = <0 1 2>;
regulator-always-on;
};
mt6315_6_vbuck3: vbuck3 {
regulator-name = "vbuck3";
regulator-min-microvolt = <300000>;
regulator-max-microvolt = <1193750>;
regulator-enable-ramp-delay = <256>;
regulator-allowed-modes = <0 1 2>;
regulator-always-on;
};
mt6315_6_vbuck4: vbuck4 {
regulator-name = "vbuck4";
regulator-min-microvolt = <1193750>;
regulator-max-microvolt = <1193750>;
regulator-enable-ramp-delay = <256>;
regulator-allowed-modes = <0 1 2>;
regulator-always-on;
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <1193750>;
};
};
};
};
};
&uart0 {
pinctrl-0 = <&uart0_pins>;
pinctrl-names = "default";
status = "okay";
};
&uart1 {
pinctrl-0 = <&uart1_pins>;
pinctrl-names = "default";
status = "okay";
};
&uart2 {
pinctrl-0 = <&uart2_pins>;
pinctrl-names = "default";
status = "okay";
};
&ssusb0 {
dr_mode = "otg";
maximum-speed = "high-speed";
usb-role-switch;
wakeup-source;
vusb33-supply = <&mt6359_vusb_ldo_reg>;
pinctrl-0 = <&usbotg_pins>;
pinctrl-names = "default";
status = "okay";
connector {
compatible = "usb-c-connector";
label = "USB-C";
data-role = "dual";
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
hs_ep: endpoint {
remote-endpoint = <&usb_hs_ep>;
};
};
port@1 {
reg = <1>;
ss_ep: endpoint {
remote-endpoint = <&hd3ss3220_in_ep>;
};
};
};
};
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
usb_hs_ep: endpoint {
remote-endpoint = <&hs_ep>;
};
};
port@1 {
reg = <1>;
usb_role_switch: endpoint {
remote-endpoint = <&hd3ss3220_out_ep>;
};
};
};
};
&u2port0 {
status = "okay";
};
&u3phy0 {
status = "okay";
};
&xhci0 {
vbus-supply = <&usb_p0_vbus>;
vusb33-supply = <&mt6359_vusb_ldo_reg>;
status = "okay";
};
&ssusb1 {
dr_mode = "host";
wakeup-source;
vusb33-supply = <&mt6359_vusb_ldo_reg>;
pinctrl-0 = <&usb1_pins>;
pinctrl-names = "default";
status = "okay";
};
&u2port1 {
status = "okay";
};
&u3port1 {
status = "okay";
};
&u3phy1 {
status = "okay";
};
&xhci1 {
vbus-supply = <&usb_p1_vbus>;
vusb33-supply = <&mt6359_vusb_ldo_reg>;
status = "okay";
};
&ssusb2 {
dr_mode = "host";
maximum-speed = "high-speed";
wakeup-source;
vusb33-supply = <&mt6359_vusb_ldo_reg>;
status = "okay";
};
&u2port2 {
status = "okay";
};
&u3phy2 {
status = "okay";
};
&xhci2 {
vbus-supply = <&usb_p2_vbus>;
vusb33-supply = <&mt6359_vusb_ldo_reg>;
#address-cells = <1>;
#size-cells = <0>;
status = "okay";
ethernet@1 {
compatible = "usb424,7850";
reg = <1>;
#address-cells = <1>;
#size-cells = <0>;
mdio {
#address-cells = <1>;
#size-cells = <0>;
ethernet-phy@1 {
reg = <1>;
microchip,led-modes = <
LAN78XX_LINK_1000_ACTIVITY
LAN78XX_LINK_10_ACTIVITY
LAN78XX_LINK_10_100_ACTIVITY
LAN78XX_LINK_ACTIVITY
>;
};
};
};
};
&vdosys0 {
port {
#address-cells = <1>;
#size-cells = <0>;
vdosys0_ep_main: endpoint@0 {
reg = <0>;
remote-endpoint = <&ovl0_in>;
};
};
};
&vdosys1 {
port {
#address-cells = <1>;
#size-cells = <0>;
vdosys1_ep_ext: endpoint@1 {
reg = <1>;
remote-endpoint = <&ethdr0_in>;
};
};
};
&watchdog {
pinctrl-names = "default";
pinctrl-0 = <&watchdog_pins>;
};
&pio {
audio_pins: audio-pins {
pins-aud-pmic {
pinmux = <PINMUX_GPIO101__FUNC_O_AUD_CLK_MOSI
PINMUX_GPIO102__FUNC_O_AUD_SYNC_MOSI
PINMUX_GPIO103__FUNC_O_AUD_DAT_MOSI0
PINMUX_GPIO104__FUNC_O_AUD_DAT_MOSI1
PINMUX_GPIO105__FUNC_I0_AUD_DAT_MISO0
PINMUX_GPIO106__FUNC_I0_AUD_DAT_MISO1>;
};
pins-pcm-wifi {
pinmux = <PINMUX_GPIO121__FUNC_B0_PCM_CLK
PINMUX_GPIO122__FUNC_B0_PCM_SYNC
PINMUX_GPIO123__FUNC_O_PCM_DO
PINMUX_GPIO124__FUNC_I0_PCM_DI>;
};
pins-i2s {
pinmux = <PINMUX_GPIO119__FUNC_O_I2SO1_MCK
PINMUX_GPIO112__FUNC_O_I2SO1_WS
PINMUX_GPIO120__FUNC_O_I2SO1_BCK
PINMUX_GPIO113__FUNC_O_I2SO1_D0
PINMUX_GPIO110__FUNC_I0_I2SIN_D0>;
};
};
disp_pwm0_pins: disp-pwm0-pins {
pins {
pinmux = <PINMUX_GPIO29__FUNC_O_DISP_PWM0>;
bias-pull-down;
};
};
dsi0_sn65dsi84_pins: dsi0-sn65dsi84-pins {
pins-irq {
pinmux = <PINMUX_GPIO128__FUNC_B_GPIO128>;
bias-pull-down;
input-enable;
};
pins-enable {
pinmux = <PINMUX_GPIO25__FUNC_B_GPIO25>;
bias-pull-down;
};
};
eth_default_pins: eth-default-pins {
pins-txd {
pinmux = <PINMUX_GPIO131__FUNC_O_GBE_TXD3>,
<PINMUX_GPIO132__FUNC_O_GBE_TXD2>,
<PINMUX_GPIO133__FUNC_O_GBE_TXD1>,
<PINMUX_GPIO134__FUNC_O_GBE_TXD0>;
drive-strength = <8>;
};
pins-cc {
pinmux = <PINMUX_GPIO139__FUNC_B0_GBE_TXC>,
<PINMUX_GPIO142__FUNC_O_GBE_TXEN>,
<PINMUX_GPIO141__FUNC_I0_GBE_RXDV>;
drive-strength = <8>;
};
pins-rxd {
pinmux = <PINMUX_GPIO135__FUNC_I0_GBE_RXD3>,
<PINMUX_GPIO136__FUNC_I0_GBE_RXD2>,
<PINMUX_GPIO137__FUNC_I0_GBE_RXD1>,
<PINMUX_GPIO138__FUNC_I0_GBE_RXD0>,
<PINMUX_GPIO140__FUNC_I0_GBE_RXC>;
drive-strength = <8>;
bias-pull-up = <MTK_PUPD_SET_R1R0_10>;
};
pins-mdio {
pinmux = <PINMUX_GPIO143__FUNC_O_GBE_MDC>,
<PINMUX_GPIO144__FUNC_B1_GBE_MDIO>;
drive-strength = <8>;
input-enable;
};
pins-power {
pinmux = <PINMUX_GPIO27__FUNC_B_GPIO27>; /* GP_EQOS_RESET */
output-high;
};
pins-intr {
pinmux = <PINMUX_GPIO148__FUNC_B_GPIO148>; /* GPIRQ_EQOS_PHY */
bias-pull-up = <MTK_PUPD_SET_R1R0_10>;
input-enable;
};
};
eth_sleep_pins: eth-sleep-pins {
pins-txd {
pinmux = <PINMUX_GPIO131__FUNC_B_GPIO131>,
<PINMUX_GPIO132__FUNC_B_GPIO132>,
<PINMUX_GPIO133__FUNC_B_GPIO133>,
<PINMUX_GPIO134__FUNC_B_GPIO134>;
};
pins-cc {
pinmux = <PINMUX_GPIO139__FUNC_B_GPIO139>,
<PINMUX_GPIO142__FUNC_B_GPIO142>,
<PINMUX_GPIO141__FUNC_B_GPIO141>,
<PINMUX_GPIO140__FUNC_B_GPIO140>;
};
pins-rxd {
pinmux = <PINMUX_GPIO135__FUNC_B_GPIO135>,
<PINMUX_GPIO136__FUNC_B_GPIO136>,
<PINMUX_GPIO137__FUNC_B_GPIO137>,
<PINMUX_GPIO138__FUNC_B_GPIO138>;
};
pins-mdio {
pinmux = <PINMUX_GPIO143__FUNC_B_GPIO143>,
<PINMUX_GPIO144__FUNC_B_GPIO144>;
input-disable;
bias-disable;
};
};
gpio_keys_pins: gpio-keys-pins {
pins-keys {
pinmux = <PINMUX_GPIO129__FUNC_B_GPIO129>,
<PINMUX_GPIO65__FUNC_B_GPIO65>,
<PINMUX_GPIO66__FUNC_B_GPIO66>;
bias-pull-up;
};
};
hd3ss3220_pins: hd3ss3320-pins {
pins-irq {
pinmux = <PINMUX_GPIO45__FUNC_B_GPIO45>;
bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
input-enable;
};
};
hdmi_vreg_pins: hdmi-vreg-pins {
pins-pwr {
pinmux = <PINMUX_GPIO50__FUNC_O_HDMITX20_PWR5V>;
bias-disable;
};
};
hdmi_pins: hdmi-pins {
pins-hotplug {
pinmux = <PINMUX_GPIO51__FUNC_I0_HDMITX20_HTPLG>;
bias-pull-down;
};
pins-cec {
pinmux = <PINMUX_GPIO52__FUNC_B1_HDMITX20_CEC>;
bias-disable;
};
pins-ddc {
pinmux = <PINMUX_GPIO53__FUNC_B1_HDMITX20_SCL>,
<PINMUX_GPIO54__FUNC_B1_HDMITX20_SDA>;
drive-strength = <10>;
};
};
i2c0_pins: i2c0-pins {
pins-bus {
pinmux = <PINMUX_GPIO56__FUNC_B1_SDA0>,
<PINMUX_GPIO55__FUNC_B1_SCL0>;
bias-pull-up = <MTK_PULL_SET_RSEL_011>;
drive-strength-microamp = <1000>;
};
};
i2c0_mux_pins: i2c0-mux-pins {
pins-reset {
pinmux = <PINMUX_GPIO6__FUNC_B_GPIO6>;
bias-pull-up;
};
};
i2c1_pins: i2c1-pins {
pins-bus {
pinmux = <PINMUX_GPIO58__FUNC_B1_SDA1>,
<PINMUX_GPIO57__FUNC_B1_SCL1>;
bias-pull-up = <MTK_PULL_SET_RSEL_011>;
drive-strength-microamp = <1000>;
};
};
i2c2_pins: i2c2-pins {
pins-bus {
pinmux = <PINMUX_GPIO60__FUNC_B1_SDA2>,
<PINMUX_GPIO59__FUNC_B1_SCL2>;
bias-pull-up = <MTK_PULL_SET_RSEL_011>;
drive-strength-microamp = <1000>;
};
};
i2c3_pins: i2c3-pins {
pins-bus {
pinmux = <PINMUX_GPIO62__FUNC_B1_SDA3>,
<PINMUX_GPIO61__FUNC_B1_SCL3>;
bias-pull-up = <MTK_PULL_SET_RSEL_011>;
drive-strength-microamp = <1000>;
};
};
i2c4_pins: i2c4-pins {
pins-bus {
pinmux = <PINMUX_GPIO64__FUNC_B1_SDA4>,
<PINMUX_GPIO63__FUNC_B1_SCL4>;
bias-pull-up = <MTK_PULL_SET_RSEL_011>;
drive-strength-microamp = <1000>;
};
};
i2c_mux_smarc_lcd_pins: i2c-mux-smarc-lcd-pins {
pins-reset {
pinmux = <PINMUX_GPIO5__FUNC_B_GPIO5>;
bias-pull-down;
};
};
mmc0_default_pins: mmc0-default-pins {
pins-cmd-dat {
pinmux = <PINMUX_GPIO161__FUNC_B1_MSDC0_DAT0>,
<PINMUX_GPIO160__FUNC_B1_MSDC0_DAT1>,
<PINMUX_GPIO159__FUNC_B1_MSDC0_DAT2>,
<PINMUX_GPIO158__FUNC_B1_MSDC0_DAT3>,
<PINMUX_GPIO154__FUNC_B1_MSDC0_DAT4>,
<PINMUX_GPIO153__FUNC_B1_MSDC0_DAT5>,
<PINMUX_GPIO152__FUNC_B1_MSDC0_DAT6>,
<PINMUX_GPIO151__FUNC_B1_MSDC0_DAT7>,
<PINMUX_GPIO156__FUNC_B1_MSDC0_CMD>;
input-enable;
drive-strength = <6>;
bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
};
pins-clk {
pinmux = <PINMUX_GPIO157__FUNC_B1_MSDC0_CLK>;
drive-strength = <6>;
bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
};
pins-rst {
pinmux = <PINMUX_GPIO155__FUNC_O_MSDC0_RSTB>;
drive-strength = <6>;
bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
};
};
mmc0_uhs_pins: mmc0-uhs-pins {
pins-cmd-dat {
pinmux = <PINMUX_GPIO161__FUNC_B1_MSDC0_DAT0>,
<PINMUX_GPIO160__FUNC_B1_MSDC0_DAT1>,
<PINMUX_GPIO159__FUNC_B1_MSDC0_DAT2>,
<PINMUX_GPIO158__FUNC_B1_MSDC0_DAT3>,
<PINMUX_GPIO154__FUNC_B1_MSDC0_DAT4>,
<PINMUX_GPIO153__FUNC_B1_MSDC0_DAT5>,
<PINMUX_GPIO152__FUNC_B1_MSDC0_DAT6>,
<PINMUX_GPIO151__FUNC_B1_MSDC0_DAT7>,
<PINMUX_GPIO156__FUNC_B1_MSDC0_CMD>;
input-enable;
drive-strength = <8>;
bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
};
pins-clk {
pinmux = <PINMUX_GPIO157__FUNC_B1_MSDC0_CLK>;
drive-strength = <8>;
bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
};
pins-ds {
pinmux = <PINMUX_GPIO162__FUNC_B0_MSDC0_DSL>;
drive-strength = <8>;
bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
};
pins-rst {
pinmux = <PINMUX_GPIO155__FUNC_O_MSDC0_RSTB>;
drive-strength = <8>;
bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
};
};
mmc1_default_pins: mmc1-default-pins {
pins-cmd-dat {
pinmux = <PINMUX_GPIO163__FUNC_B1_MSDC1_CMD>,
<PINMUX_GPIO165__FUNC_B1_MSDC1_DAT0>,
<PINMUX_GPIO166__FUNC_B1_MSDC1_DAT1>,
<PINMUX_GPIO167__FUNC_B1_MSDC1_DAT2>,
<PINMUX_GPIO168__FUNC_B1_MSDC1_DAT3>;
input-enable;
drive-strength = <6>;
bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
};
pins-pwr {
pinmux = <PINMUX_GPIO111__FUNC_B_GPIO111>;
bias-pull-down;
};
pins-pullup {
pinmux = <PINMUX_GPIO11__FUNC_B_GPIO11>;
bias-pull-up;
};
pins-clk {
pinmux = <PINMUX_GPIO164__FUNC_B1_MSDC1_CLK>;
drive-strength = <6>;
bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
};
pins-insert {
pinmux = <PINMUX_GPIO2__FUNC_B_GPIO2>;
bias-pull-up;
};
};
mmc1_uhs_pins: mmc1-uhs-pins {
pins-cmd-dat {
pinmux = <PINMUX_GPIO163__FUNC_B1_MSDC1_CMD>,
<PINMUX_GPIO165__FUNC_B1_MSDC1_DAT0>,
<PINMUX_GPIO166__FUNC_B1_MSDC1_DAT1>,
<PINMUX_GPIO167__FUNC_B1_MSDC1_DAT2>,
<PINMUX_GPIO168__FUNC_B1_MSDC1_DAT3>;
input-enable;
drive-strength = <6>;
bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
};
pins-clk {
pinmux = <PINMUX_GPIO164__FUNC_B1_MSDC1_CLK>;
drive-strength = <6>;
bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
};
};
mmc2_default_pins: mmc2-default-pins {
pins-clk {
pinmux = <PINMUX_GPIO170__FUNC_B1_MSDC2_CLK>;
drive-strength = <4>;
bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
};
pins-cmd-dat {
pinmux = <PINMUX_GPIO169__FUNC_B1_MSDC2_CMD>,
<PINMUX_GPIO171__FUNC_B1_MSDC2_DAT0>,
<PINMUX_GPIO172__FUNC_B1_MSDC2_DAT1>,
<PINMUX_GPIO173__FUNC_B1_MSDC2_DAT2>,
<PINMUX_GPIO174__FUNC_B1_MSDC2_DAT3>;
input-enable;
drive-strength = <6>;
bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
};
};
mmc2_uhs_pins: mmc2-uhs-pins {
pins-clk {
pinmux = <PINMUX_GPIO170__FUNC_B1_MSDC2_CLK>;
drive-strength = <4>;
bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
};
pins-cmd-dat {
pinmux = <PINMUX_GPIO169__FUNC_B1_MSDC2_CMD>,
<PINMUX_GPIO171__FUNC_B1_MSDC2_DAT0>,
<PINMUX_GPIO172__FUNC_B1_MSDC2_DAT1>,
<PINMUX_GPIO173__FUNC_B1_MSDC2_DAT2>,
<PINMUX_GPIO174__FUNC_B1_MSDC2_DAT3>;
input-enable;
drive-strength = <6>;
bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
};
};
mmc2_eint_pins: mmc2-eint-pins {
pins-dat1 {
pinmux = <PINMUX_GPIO172__FUNC_B_GPIO172>;
input-enable;
bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
};
};
rv3028_pins: rv3028-pins {
pins-irq {
pinmux = <PINMUX_GPIO42__FUNC_B_GPIO42>;
bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
input-enable;
};
};
spi0_pins: spi0-pins {
pins-spi {
pinmux = <PINMUX_GPIO69__FUNC_O_SPIM0_CSB>,
<PINMUX_GPIO70__FUNC_O_SPIM0_CLK>,
<PINMUX_GPIO71__FUNC_B0_SPIM0_MOSI>,
<PINMUX_GPIO72__FUNC_B0_SPIM0_MISO>;
bias-disable;
};
};
spi1_pins: spi1-pins {
pins-spi {
pinmux = <PINMUX_GPIO75__FUNC_O_SPIM1_CSB>,
<PINMUX_GPIO76__FUNC_O_SPIM1_CLK>,
<PINMUX_GPIO77__FUNC_B0_SPIM1_MOSI>,
<PINMUX_GPIO78__FUNC_B0_SPIM1_MISO>;
bias-disable;
};
};
pcie_default_pins: pcie-default-pins {
pins {
pinmux = <PINMUX_GPIO47__FUNC_I1_WAKEN>,
<PINMUX_GPIO48__FUNC_O_PERSTN>,
<PINMUX_GPIO49__FUNC_B1_CLKREQN>;
bias-pull-up;
};
};
ts_dsi0_goodix_pins: ts-dsi0-goodix-pins {
pins-irq {
pinmux = <PINMUX_GPIO146__FUNC_B_GPIO146>;
bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
input-enable;
};
pins-reset {
pinmux = <PINMUX_GPIO7__FUNC_B_GPIO7>;
bias-pull-down;
};
};
uart0_pins: uart0-pins {
pins {
pinmux = <PINMUX_GPIO31__FUNC_O_UTXD0>,
<PINMUX_GPIO32__FUNC_I1_URXD0>;
bias-pull-up;
};
};
uart1_pins: uart1-pins {
pins {
pinmux = <PINMUX_GPIO33__FUNC_O_UTXD1>,
<PINMUX_GPIO34__FUNC_I1_URXD1>;
bias-pull-up;
};
};
uart2_pins: uart2-pins {
pins {
pinmux = <PINMUX_GPIO35__FUNC_O_UTXD2>,
<PINMUX_GPIO36__FUNC_I1_URXD2>;
bias-pull-up;
};
};
usbotg_pins: usbotg-pins {
pins-iddig {
pinmux = <PINMUX_GPIO83__FUNC_B_GPIO83>;
input-enable;
bias-pull-up;
};
pins-valid {
pinmux = <PINMUX_GPIO85__FUNC_I0_VBUSVALID>;
input-enable;
};
pins-vbus {
pinmux = <PINMUX_GPIO84__FUNC_O_USB_DRVVBUS>;
output-high;
};
};
usb1_hub_pins: usb1-hub-pins {
pins {
pinmux = <PINMUX_GPIO147__FUNC_B_GPIO147>;
output-low;
};
};
usb1_pins: usb1-pins {
pins {
pinmux = <PINMUX_GPIO88__FUNC_I0_VBUSVALID_1P>;
input-enable;
};
};
usb2_eth_pins: usb2-eth-pins {
pins {
pinmux = <PINMUX_GPIO80__FUNC_B_GPIO80>;
output-low;
};
};
wifi_pwrseq_pins: wifi-pwrseq-pins {
pins {
pinmux = <PINMUX_GPIO89__FUNC_B_GPIO89>;
output-low;
};
};
watchdog_pins: watchdog-pins {
pins {
pinmux = <PINMUX_GPIO100__FUNC_O_WATCHDOG>;
bias-pull-up;
};
};
};
Reference in New Issue View Git Blame Copy Permalink